• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.438-440
• /
• 2002

In deregulated power market, transmission pricing methodology should maintain non-discrimination amongst all participants while ensure that TRANSCOs recover their revenue requirements. The proposed transmission pricing methodology for Korea needs cost allocation ratios, such as allocation ratio of physical transport to network security and that of generators to loads. In this paper, we studied the nodal transmission price determined by the cost allocation factors and its influence on GENCOs and DISTCOs.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.922-928
• /
• 2015

A novel peak-to-average power ratio (PAPR) reduction method is proposed for single-carrier frequency-division multiple access (SC-FDMA) signals. The proposed method deliberately distorts the amplitude values of a few of the complex modulated symbols that cause peaks beyond a predetermined threshold in the samples of the output signal. The method then marks the location indices of the distorted symbols by using a pilot block at the transmitter without transmitting side information. At the receiver, the method is then able to recover the distorted amplitude values through the marked location indices. Computer simulation results show that when compared to conventional SC-FDMA signals, the proposed scheme can effectively reduce the PAPR of SC-FDMA signals with asymptotically consistent bit error rate (BER) performance.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.11
• /
• pp.819-825
• /
• 1987

The ALE problem, which tries to recover a sinusoidal signal corrupted by noise, has been solved using FIR filters. Recently several methods have been proposed using a norch filter of IIR type. In this study, the notch filter was represented with a parameter and auxiliary signals were generated by using an adaptive observer. A simple method is proposed to estimate the parameter. This method is tested under various circumstances by changing the input frequency, S/N ratio, and the type of the noise. The simulation shows that this method gives much better results than the other known methods with respect to the input S/N ratio and converging times. This method is simple and does not require much conputation, so it can be easily implemented in real time applications.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.37-43
• /
• 1992

The submerged injection smelting process was performed to recover Zn and Pb from steel dust throuth vaporization and to investigate the effect of temperature, slag composition, injection time, gas flow rate, etc. on the recoveries of valuable metals. The results show that vaporation rates of zinc and lead increased at higher temperture and higher moral ratio of ferrous to ferric oxides. In the initial stage of submerged injection of nitrogen gas, the molten slags of the dust have high value of molar ratio of $Fe^{2+}$/$Fe^{3+}$ and hence zinc and lead can be effectively recovered.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.44.2-44.2
• /
• 2019

Turbulent motions perturb magnetic field lines and produce magnetic fluctuations. The perturbations leave imprints of turbulence statistics on magnetic field. Observation of synchrotron radiation is one of the easiest ways to study turbulent magnetic field. First, we obtained the spatial spectrum of synchrotron polarization so that shows how the spectrum is affected by Faraday rotation and how to recover the statistics of underlying turbulence magnetic field. Since polarized synchrotron intensity arising from magnetized turbulence are anisotropic along the direction of mean magnetic field. Secondly, we studied quadrupole ratio to quantitatively describe the degree of anisotropy introduced by magnetic field at multi-wavelengths. This work demonstrated that the spectrum and quadrupole ratio of synchrotron polarization can be very informative tools to get detailed information about the statistical properties of MHD turbulence from radio observations of diffuse synchrotron polarization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.1-6
• /
• 2019

Multicast is an efficient method for real-time transmission in many multimedia applications. It is important to recover lost packets and to manage multicast groups according to the network status in order to improve the reliability of multicast transmissions. In this paper, we propose a method that can efficiently recover lost packets in a large multicast group. In the proposed method, we create a recovery cluster (RC) using a multicast domain (MD) for recovery of lost packets. In the conventional methods, clusters send a request message for lost packets to the senders in order to recover the packets lost from many multicast applications. This increases packet delay time and overhead because of the feedback messages and retransmitted packets. In the proposed method, we improve these problems using the RC, which consists of many MDs (which have overlay multicast senders), and many cluster heads (CHs). We divide the message into blocks, and divide each block into many segments for packet recovery using the CHs. When packet loss occurs, all CHs share the segment information and recover the lost segments at the same time. Simulation results show that the proposed method could improve the packet recovery ratio by about 50% compared to the conventional methods.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.12
• /
• pp.463-470
• /
• 2016

With the growing demand for MAC-based system, the need for digital forensic techniques of these system has been increasing. In the digital forensic analysis process, sometimes analysts have recovered the deleted files when they prove the allegations if system user try to remove the evidence deliberately. Research and analysis that recover the deleted files from a file system constantly been made and HFS+ that is a file system of MAC-based system also has been researched. Carving techniques primarily has been used to recover the deleted file from HFS+ a file system because metadata of folder or file overwrite metadata of a deleted file when file is deleted from a file system on HFS+ characteristic. But if the file content is saved by separated state in a file system, Carving techniques also can't recover the whole or a part of the deleted file. In this paper we describe technique the deleted file recovery technique using HFS+ file system a journal. This technique that is suggested by existing research and analysis result is the technique that recover the deleted file by metadata that is maintained in a journal on HFS+ file system. but this technique excludes specific files and this problem needs to be reformed. In this paper we suggest algorithm that analysis a journal of HFS+ file system in detail. And we demonstrate that the deleted file cat be recovered from the extracted metadata by this algorithm without the excluded file.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.4
• /
• pp.23-31
• /
• 2020

Recently, meteorological disasters have been increasing by climate change, excessive rainfall, and landslide. The purpose is to develop new fabric concrete that can prevent and recover from damages because some of areas are vulnerable to meteorological disaster. Specifically, this technology can minimize time and space constraint when repairing the concrete structure and installing a formwork. The structure of fabric concrete is a mixture of fabric concrete and a high-speed hardened cement, Silica sand, wollastonite mineral fiber, fabric material and waterproof PVC fabric. In this study, the ratio of mechanical properties and durability of the fabric concrete mixture was evaluated by deriving the binder: silica sand mix ratio of the fabric concrete mixture and substituting part of the cement amount with wollastonite mineral fiber. Best binder in performance evaluation: Silica sand mix ratio is 6: 4 and the target mechanical performance and durability are the best when over 15% wollastonite binder is replaced by silicate mineral fiber.

• Journal of the Korea Concrete Institute
• /
• v.13 no.3
• /
• pp.195-205
• /
• 2001

This Paper describes a numerical method to evaluate the flexural strength of reinforced concrete members exposed to fire. An analytical method is developed for the moment-curvature relationship for the cross section which is subjected to high temperature. The method performs heat-transfer analysis for the cross sections and subsequently performs numerical analysis using the stress-strain relationships of concrete and reinforcing steel in various heat conditions. The results of the numerical studies are ; 1) the residual flexural strength exposing at high temperature is affected by the heating time, the depth of concrete cover and reinforcement ratio, 2) the residual flexural strength after exposed at high temperature is recovered of its original strength at minimum ratio of reinforcement, while members having half of maximum ratio and maximum ratio of reinforcement do not recover its original strength, 3) furthermore, the concrete may reach its maximum capacity before reinforcement yields in reinforced concrete members having maximum ratio of reinforcement.

• Nutrition Research and Practice
• /
• v.13 no.1
• /
• pp.17-22
• /
• 2019

BACKGROUND/OBJECTIVES: Successful recovery of an animal from exercise is essential, especially prior to the next exercise session. This study was conducted to find an effective exercise-to-rest period ratio for the restoration of energy sources and replenishment of anti-oxidative status in tissue after exercise. MATERIALS/METHODS: Thirty-two rats were assigned to either non-training or training exercise groups for 5 weeks. After that period, the two groups were subdivided into four smaller groups: non-exercise (NE), exercise 0.5 hour and rest 1 hour (ER0.5:1), exercise 1 hour and rest 1 hour (ER1:1), exercise 2 hours and rest 1 hour (ER2:1). RESULTS: In the training group animals and compared to the NE group, the levels of plasma glucose after the rest period were significantly high in all ER groups but highest in the ER2:1 group. Similarly, the liver glycogen level was highest in the ER2:1 group. The plasma FFA level reached the highest level in the ER2:1 group but was similarly high in the ER0.5:1 group. Liver TG level was unchanged in the ER2:1 and ER1:1 groups but was significantly high in the ER0.5:1 group. Muscle TG levels were decreased in all three ER groups. Plasma protein levels were significantly high in the ER2:1 and ER0.5:1 groups. In both training animal and non-training animals, the liver protein levels did not change significantly between the NE and ER groups, irrespective of the exercise-to-rest ratio. In the training animal group, muscle protein level was significantly low in the ER2:1 and ER0.5:1 groups. The activity levels of superoxide dismutase and catalase, as well as the malondialdehyde concentration, were not significantly different between NE and ER groups, irrespective of the exercise-to-rest period ratio. CONCLUSIONS: These results indicate that animals provided with a 0.5:1 to 1:1 exercise-to-rest period ratio can restore their muscle energy sources and recover their anti-oxidative defense system.