• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.34-41
• /
• 2005

We report some recent results in the rewritable Blu-ray Disc with enhanced overwrite cyclability by using the growth dominant eutectic based Ge(Sb70Te30)+Sb recording layer, GeN interface layer and write strategy optimization. We have developed phase-change optical media with appropriate write strategy for 36(i.e., 1X)-72Mbps(i.e., 2X) dual speed Blu-ray Disc system and fur the future high speed optical data storage. For recording layer, eutectic-based Ge(Sb70Te30)+Sb material was used and Sb/Te ratio and Ge content were optimized to obtain proper erasability and archival stability of recorded amorphous marks. The recording layer is wrapped up in GeN interface layers to obtain overwrite cyclability and higher crystallization speed. In addition, we designed appropriate write strategy so called Time-Shifted Multipulse (TSMP) write strategy where starting position of multipulse parts are shined from reference clock. With this write strategy, the jitter characteristics of the disc was improved and we found that leading edge jitter was improved much more than trailing edge jitter in 1X-2X speed recording. Finally, we investigated the higher speed feasibility of 144Mbps(i.e., 4X) by adopting some elemental doping to the eutectic based Ag-In-Sb-Te recording layer and structural optimization of constitution layers in Blu-ray Disc. In the paper, we report the effect of Sn addition for the feasibility of higher speed recording. The addition of Sn shows increases of the crystallization speed of phase change recording layer.

• 한국철도학회논문집
• /
• 제7권4호
• /
• pp.291-295
• /
• 2004

The Track geometry measuring on High-speed railway is the most important subject for the track construction and track maintenance work. Also the measuring accuracy is so significant part because it provides principle data for the maintenance plan and the assesment of working quality and can control the train speed limitation. From this point of view, it is very important to verify for the track recording coach(EM120) in KNR. According to the result of spectrum analysis, the noise near 1m waveband was found on the track recording data from EM120. So, New filter has been applied to remove the noise form track recording data. and it makes possible to acquire resembling result to real track geometry.

• 한국강구조학회 논문집
• /
• 제18권1호
• /
• pp.47-51
• /
• 2006

고속철도 궤도검측은 공사관리는 물론, 궤도유지관리 측면에서 매우 중요한 과제이며 향후 유지보수 시 작업계획수립, 작업량산출, 열차속도제한 등 유지보수 시 기본적인 자료로 제공되는 만큼 궤도검측치의 정확성은 매우 중요하며, 이러한 관점에서 국내 궤도검측차(EM-120)의 검측성능과 정확성을 검증하고자 하였다. 본 논문에서는 현재 일반철도구간에 대한 궤도검측 시 사용하고 있는 궤도검측차 (EM-120)의 선형검측자료를 Spectrum 분석한 결과, 파장 1m 부근의 검측치에 Noise가 있는 것을 확인할 수 있었다. 또한 이러한 Noise를 제거하기 위해 Spectrum 분석을 통한 새로운 Filter를 적용한 결과 실제 궤도틀림치에 보다 더 근접한 검측결과를 얻을 수 있었으며 사용기간에 따른 틀림전진 경향 또한 파악할 수 있었다.

• 정보저장시스템학회논문집
• /
• 제8권2호
• /
• pp.50-55
• /
• 2012

Optical disks are widely used in libraries and archives as digital data media due to their long-term storage stability. Though archive-grade optical disks are already available on the market, there is a relative less focusing on the reliable recording conditions. Commercial BD-R media were recorded at various recording speeds with the maximum speed of 6X, and tested at the acceleration aging conditions. Through the evaluation of long-term storage features by the data stability test, lower recording speed of 2x resulted in better long-term storage stability. In addition, degradation aspects of unstable long-term storage feature at outer region of disk were discussed.

• 한국자기학회지
• /
• 제16권2호
• /
• pp.149-156
• /
• 2006

자기 기록 시스템은 시간의 흐름에 따라 기록 밀도는 높아지고 있고 또한 기록 속도 역시 빨라지고 있다. 더욱 빠른 기록 속도의 요구 치로 인하여 자기 기록 헤드에 인가되어지는 기록 주파수 역시 높아져야 하고 또한 기록이 일어나는 기록 미디어의 회전 속도 역시 빨라져야 한다. 이와 같은 두 가지 요건은 헤드와 기록 미디어에서 와전류를 발생시키게 된다. 기록 헤드에서는 기록 주파수에 의해 발생되는 와전류가 존재한다. 그리고 기록 미디어에서는 기록 주파수에 의해 발생되는 와전류와 회전하는 미디어의 선속도에 의해 발생하는 와전류가 존재하게 된다. 본 논문에서는 비선형 3차원 유한 요소법을 이용하여 자기 기록 헤드에서 발생하는 와전류와 기록 미디어에서 발생하는 두 종류의 와전류의 분포를 분석하고 이와 같이 발생한 와전류가 자기 기록시스템에서 자기 기록 필드에 미치는 영향에 대해서 연구하였다.

• 한국철도학회논문집
• /
• 제8권2호
• /
• pp.111-115
• /
• 2005

The Study provides the technical background and calculation method f3r the long wave track defect. On high speed railway, It is necessary to manage the long wave band up to 80m track defect fur improving a riding quality. For this reason, Track recording methods for highspeed railway are used 10m and 30m recording bases, these are covered middle wave band and long wave band successfully. Extended base recording data is calculated by geometrical model and this data provides a good result for KTX riding index.

• 대한원격탐사학회지
• /
• 제18권3호
• /
• pp.147-153
• /
• 2002

The real-time reception and recording of down-link mission data from a satellite requires the highest reliability because the data lost in receiving process cannot be recovered. The data receiving and recording system has moved from a set of dedicated hardware and software components to commercial-off-the-shelf (COTS) components in order to reduce the system cost as well as to upgrade the system easily for handling other satellite data. The use of COTS hardware and middleware components prevents the system developer from correcting or modifying the internal operations of the COTS components, and hence, instant performance degradation of the COTS components which affects the reliable data acquisition must be covered by a software algorithm. This paper introduces the instant performance problem of a COTS data recording device which leads to the data loss in the real-time data reception and recording process. As a result, the requirement of the modification of the conventional data read/write technique is issued. In order to overcome the data loss problem due to the use of COTS components and the conventional software technique, a new algorithm called a software buffering technique is proposed. The experiments show that the application of the proposed technique results in reliable real-time reception and recording of high speed serial data.

• ETRI Journal
• /
• 제26권3호
• /
• pp.189-194
• /
• 2004

We demonstrate a high-speed recording based on field-induced manipulation in combination with an optical reading of recorded bits on Au cluster films using the atomic force microscope (AFM) and the near-field scanning optical microscope (NSOM). We reproduced 50 nm-sized mounds by applying short electrical pulses to conducting tips in a non-contact mode as a writing process. The recorded marks were then optically read using bent fiber probes in a transmission mode. A strong enhancement of light transmission is attributed to the local surface plasmon excitation on the protruded dots.

• Ocean and Polar Research
• /
• 제29권4호
• /
• pp.311-316
• /
• 2007

Ocean noise may be used for monitoring wind speed and rainfall rate on the sea surface, as well as for tracking whales' migration routes. In particular, low-frequency ocean noise has recently been of concern with relation to the behavior of marine mammals. Low-frequency ocean noise has been increasing over the past few decades due to increase of ship traffic and offshore oil industry activities. Mechanical noise such as flow noise and cable strumming noise may be induced if low-frequency ocean noise is measured by cabled traditional hydrophone in high current areas. To successfully measure low-frequency ocean noise in a shallow water environment with strong current, we developed a self-recording hydrophone. This paper describes the main configurations of the self-recording hydrophone and presents some results on measured data.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1962-1967
• /
• 2008

A event recorder system stores a train speed and the related information for train operation in real time. Using those information, we can analysis the train operation and the reason of train accident. Currently the event recorder only manipulate the data related the train operation mechanically and electrically. In this paper we propose the event recorder to record the voice communication between the manager in the control center and train operator. By recording the voice communication in the high speed train, the correctness of analysis of train accident can be increased. The system architecture of the event recorder with voice recording is studied and interface between other equipment is proposed. And the software architecture of new event recorder is developed. We study the method of converting analog voice signal into digital data and compressing method. Also the architecture of memory to store the compressed voice data and regeneration of original analog voice are studied.