• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3201-3204
• /
• 2000

In general, analog tester or strip chart recorder have been used to measure the corrosion potential of structures such as gas pipelines, oil pipelines, hot water pipelines, power cables etc. Recently, automatic digital data logger substitutes for these manual equipment because using these manual equipments are tedious and time consuming. However, digital data logger also has a shortcoming, that is, short measuring time because of the short lifetime of batteries. Therefore, we developed a long lifetime and low power loss battery taking advantage of galvanic series. In this paper, the results of development for power generator using two metals and DC/DC converter in order to obtain enough voltage for the operation of digital data logger. DC/DC converter operates with 0.5[V]. Its output voltage is 3.5[V] and output current is from 60[mAh] to 1,200[mAh].

• Journal of the Optical Society of Korea
• /
• v.11 no.3
• /
• pp.101-107
• /
• 2007

In this paper, we have presented the results of Wavelength Division Multiplexing-Passive Optical Network (WDM-PON) based fiber-to-the-home (FTTH) field trial test which was held in the city of Gwangju. We have implemented an injection locked Fabry-Perot Laser Diode (FP-LD) based WDM-PON system and reliably delivered Internet Protocol TV (IP-TV), networked Personal Video Recorder (N-PVR), High-Definition Video on Demand (HD-VoD), Education on Demand (EoD) and Internet service as FTTH service through the system during the field trial test. We have also verified that the WDM-PON system worked well to provide quality of service (QoS) guaranteed 100Mbps bandwidth per subscriber. Furthermore, we have presented network designing issues in Outside Plant (OSP) and Customer Premises Network (CPN) that should be overcome to efficiently deploy FTTH service. Finally, based on the field trial test results, we proposed FTTH service deployment strategies.

• Current Industrial and Technological Trends in Aerospace
• /
• v.9 no.1
• /
• pp.90-101
• /
• 2011

In this article, we introduce the technologies and trend of technical evolution of Payload Data Handling Unit (PDHU) for Earth Observation Satellites. As well, we review the efforts for the Koreanization of PDHU so far, and conclude with some suggestions for future work.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.28-30
• /
• 2003

DVR은 아날로그(analog) 테이프 레코더(tape recorder)에 비해 여러 가지 장점을 가지고 있어 빠른 속도로 아날로그 테이프 레코더를 대치하고 있다［1］. 지금까지 대부분의 DVR시스템은 MS사의 윈도우즈 (MS-windows)애 기반하여 개발되었으나 MS윈도우즈 운영체제의 비공개 소스 코드(source code)로 인해 효율적인 시스템을 개발하기 어려운 문제점이 있다. 이에 본 논문에서는 운영체제의 코드가 오픈 되어있어 누구나 원하는 소프트웨어를 개발할 수 있는 리눅스(Linux) 운영체제를 기반으로 한 DVR시스템의 통신 모듈을 설계한다. 또한 본 논문에서는 리눅스 운영체제의 스케쥴링에 의한 실시간 프로그램의 부하를 측정하고, 본 논문에서 구현한 통신 모듈을 사용하여 프로세스의 개수에 따른 DVR시스템의 성능을 측정하였다. 측정 결과 구현한 통신 모듈은 20Mbps이상의 전송 속도로 수행되는 것으로 나타났다.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1170-1172
• /
• 1996

Analog-digital converter boards for use in personal computers have recently being improved markedly, many kinds of high speed(1 MHz - 10 MHz sampling rale) and over 12-bit vertical resolution A/D boards released. It can be applicable to high frequency magnetic measurements. In measurement of magnetic properties of high frequency, digitizing oscilloscope or trasient recorder are being used. but, those price are often expensive, we constructed PC controlled A-C B-H loop tracer that can measure Bs, Br, He, permeability and may be applied about 100 Hz - 20 kHz range. it use IBM PC compatible 1 M Sample/s, 12 bit A/D converter board with SSH(Simultaneous Sample and Hold).

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.442-443
• /
• 2006

Vacuum carbonization of nanometer tungsten powder was investigated in a simple designed apparatus. An X-Y recorder was used to plot differential thermal analysis (DTA) curves to determine starting temperature of carbonization of four samples with different specific surface area. The product was detected by X-ray Diffraction (XRD) and small angle X-ray scattering (SAXS). The results show that finer tungsten powder has lower starting temperature of carbonization. Tungsten powder, which BET surface area is $32.97m^2/g$, is completely carbonized to tungsten carbide at $1050^{\circ}C$, although the starting temperature is $865^{\circ}C$. Particle grows sharply before carbonization.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1976-1977
• /
• 2007

This paper introduce the electrical quantities of a three-phase-connected wind induction generator (WIG) under sudden connection of static loads. An intelligent power-system recorder/monitor is employed to measure threephase voltages and currents of the studied system at WIG's terminals and load's terminals for 5 minutes. A laboratory 300 W wound-rotor induction machine driven by a blushless DC motor is utilized as the studied WIG. Since the generated harmonic currents are randomly varied, total harmonic distortion (THD) of current using cumulative probability density function is employed to determine the penetration of harmonic distortion. The results show that the harmonic currents generated by the studied WIG may be severely amplified to a high level by the connected self-excited capacitance at the stator's terminals.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.82-84
• /
• 1998

LDM(Linear DC Motor) are used in high speed, high-precision position control system. Because of these advatages, LDM has already used in the motor of pen-recorder, magnetic-disk devices. Under the limited dimension, we propose the design method of LDM by magnetic circuit. In this paper, a relation between the thrust constant and size of a LDM that is moving coil type with unipolar is described, which is defined as a simple relational equation. To maximize the rate of thrust to the volume of LDM, the magnetic flux density in the yoke is adjusted to the value of magnetic equation By the magnetic field analysis(FEM), the validity of the equation is confirmed.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.2
• /
• pp.63-68
• /
• 2010

Structural vibrations are among the biggest concerns in developing high resolution DVR(Digital Video Recorder) monitors. The vibrations in DVR monitors are mostly originated from the excitation sources such as the HDD and the cooling fan. In this study, the vibrations generated from the excitation sources were investigated in order to analyze the individual effect on the structural vibrations of the monitors and further to establish the design alteration to suppress the vibrations for the stability of the structure and for the better quality of the screen. The result shows that relatively simple design alterations can improve the stability of the structure substantially.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1369-1371
• /
• 2011

효과적이고 체계적인 소프트웨어의 재사용을 위해서는 해당 도메인에 대한 공통된 자산을 먼저 개발해야 한다. 재사용을 위한 컴포넌트 집합은 복잡한 소프트웨어를 컴포넌트 단위의 구조로 분해하고 이를 다시 조립할 수 있도록 하여 생산성을 향상시키지만 광범위한 분석으로 인해 컴포넌트를 개발하는데 필요한 비용과 기간을 증가시키기도 한다. 이러한 문제점을 극복하기 위해 소프트웨어 제품 라인 공학을 적용하여 해당 도메인의 수요나 업무 수행을 만족하는 일련의 공통된 기능들을 이용하여 재사용할 단위인 핵심 자산을 구축하고 요구사항에 따라 목표 시스템을 단기간에 저비용으로 개발할 수 있다. 본 논문에서는 소프트웨어 제품 라인 공학을 통해 정의된 M&S프레임워크의 핵심 자산을 제시하고 이를 재사용해 기록장치 소프트웨어를 개발한 사례에 대하여 설명한다.