• The Plant Pathology Journal
• /
• v.15 no.1
• /
• pp.53-56
• /
• 1999

Fifty-three isolates of Fusarium graminearum were obtained from corn and barley samples in several provinces of Korea. Gas chromatography-mass spectrometric analysis of trichothecenes produced by these isolates revealed that 37 and 16 isolates were nivalenol (NIV)- and deoxynivalenol (DON)-chemotypes, respectively. Two hundred and seventy-five nitrate-nonutilizing (nit) mutants were obtained from the isolates. Of these mutants, 187 were identified as nit1, nit3, or NitM, but 88 could not be identified as one of these classes. The highest frequency of nit mutant was nit1 (65%), followed by nit3 (20%) and NitM (15%). Higher frequency of NitM was observed in DON-chemotypes than in NIV-chemotypes. The mutants were used for vegetative compatibility group (VCG) analysis by examining heterokaryosis using complementary mutant pairs. No heterokaryon formation was observed among all 1,248 pairwise combinations, suggesting that all isolates tested belong to different VCGs. Higher frequency of self-incompatibility was observed in NIV-chemotypes than in DON-chemotypes. These results suggest that the like-lihood of asexual genetic recombination may be very low I F. graminearum under the field condition.

• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.431-435
• /
• 2002

The dark current and photocurrent(PC) spectrum of Mg-doped GaN thin film were investigated with various bias voltages and temperatures. At high temperature and small bias, the dark current is dominated by holes thermally activated from an acceptor level Al located at about 0.16 eV above the valence band maximum $(E_v)$, The PC peak originates from the electron transition from deep level A2 located at about 0.34 eV above the $E_v$ to the conduction band minimum $(E_ C)$. However, at a large bias voltage, holes thermally activated from A2 to Al experience the field-in-duces tunneling to form one-dimensional defect band at Al, which determines the dark current. The PC peak associated with the transition from Al to $E_ C$ is also observed at large bias voltages owing to the extended recombination lifetime of holes by the tunneling. In the near infrared region, a strong PC peak at 1.20 eV appears due to the hole transition from deep donor/acceptor level to the valence band.

• Current Photovoltaic Research
• /
• v.6 no.1
• /
• pp.12-16
• /
• 2018

The interest in perovskite solar cells has been skyrocketed owing to their rapid progress in efficiency in recent years. Here, we report the effect of non-stoichiometry in the methylammonium lead trihalide ($MAPbI_3$) precursors used in a solution process with different MAI : $PbI_2$ ratios of 1 : 0.96, 1 : 1.10, 1 : 1.15, and 1:1.20. With an increase in the $PbI_2$ content, the $PbI_2$ secondary phase was found to form at grain boundary region of perovskite thin films, as evidenced by X-ray diffraction (XRD) and scanning electron microscopy (SEM). In terms of device performance, open-circuit voltage in particular is significantly improved with increasing the molar ratio of $PbI_2$, which is possibly ascribed to the reduction in recombination sites at grain boundary of perovskite and hence the prolonged life time of light-generated carriers according to the reported. As a result, the $PbI_2-excess$ devices exhibited a higher power conversion efficiency compared to the MAI-excess ones.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.683-686
• /
• 2011

Purpose: Craniosynostosis of three or more cranial sutures was not common. "Mercedes Benz pattern," named by Moore1 was a rare form of craniosynostosis and had an atypical pattern of premature closure of cranial suture. It was not reported in Republic of Korea. We report this case with literature review. Methods: A 13-months-old male patient visited our clinic due to exophthalmos. He showed normal developmental course. Other neurological tests were normal but he was Crouzon syndrome patient. CT scans showed bilateral lambdoid and posterior sagittal sutures were fused and the length of the skull was extended. Cranioplasty with pi craniotomy & Barrel-Stave osteotomy and recombination of the bone flap was performed. Results: The patient was discharged after post operative 10 days without any complications. In follow up visit after 2.7 years, he was in good state without recurrence and functional abnormality of skull. Conclusion: This was the first case of Mercedes Benz pattern craniosynostosis with Crouzon syndrome in Korea. This type of craniosynostosis has to be considered differently from single type of craniosynostosis or typical syndromic craniosynostosis clinically and surgically.

• Development and Reproduction
• /
• v.18 no.2
• /
• pp.99-106
• /
• 2014

Fish larvae are immediately exposed to microbes from hatching to maturation of their lymphoid organs, therefore effective innate mechanisms is very important for survival. However, the knowledge of the development of immune system in fish is limited and in demand now. In vertebrates, recombination-activating gene 1 (RAG-1) and immunoglobulin M (IgM) have been considered as very useful markers of the physiological maturity of the immune system. In this study, the expression of the both genes was assessed throughout the early developmental stages of olive flounder larvae (5-55 dph) and used as markers to follow the development of immune system. RAG-1 and IgM mRNA expression was detectable at 5 dph and remained so until 55 dph. These patterns of expression may suggest that the olive flounder start to develop its function around 5 dph. Tissue distribution was found that both genes mRNAs are only expressed in the immune-related organ such as spleen, kidney and gill. The early detection of IgM mRNA led to the investigation of its presence in oocytes. Both RAG-1 and IgM mRNA transcripts were detected in unfertilized oocytes, suggesting that they are maternally transferred. The biological significance of such a phenomenon remains to be investigated.

• Molecules and Cells
• /
• v.25 no.2
• /
• pp.205-210
• /
• 2008

To develop molecular markers linked to the $L^4$ locus conferring resistance to tobamovirus pathotypes in pepper plants, we performed AFLP with 512 primer combinations for susceptible (S pool) and resistant (R pool) DNA bulks against pathotype 1.2 of pepper mild mottle virus. Each bulk was made by pooling the DNA of five homozygous individuals from a T10 population, which was a near-isogenic $BC_4F_2$ generation for the $L^4$ locus. A total of 19 primer pairs produced scorable bands in the R pool. Further screening with these primer pairs was done on DNA bulks from T102, a $BC_{10}F_2$ derived from T10 by back crossing. Three AFLP markers were finally selected and designated L4-a, L4-b and L4-c. L4-a and L4-c each underwent one recombination event, whereas no recombination for L4-b was seen in 20 individuals of each DNA bulk. Linkage analysis of these markers in 112 $F_2$ T102 individuals showed that they were each within 2.5 cM of the $L^4$ locus. L4-b was successfully converted into a simple 340-bp SCAR marker, designated L4SC340, which mapped 1.8 cM from the $L^4$ locus in T102 and 0.9 cM in another $BC_{10}F_2$ population, T101. We believe that this newly characterized marker will improve selection of tobamovirus resistance in pepper plants by reducing breeding cost and time.

• Journal of Powder Materials
• /
• v.20 no.6
• /
• pp.474-478
• /
• 2013

The most general photocatalyst, $TiO_2$ and $WO_3$, are acknowledged to be ineffective in range of visible light. Therefore, many efforts have been directed at improving their activity such as: band-gap narrowing with non-metal element doping and making composites with high specific surface area to effectively separate electrons and holes. In this paper, the method was introduced to prepare a photo-active catalyst to visible irradiation by making a mixture with $TiO_2$ and $WO_3$. In the $TiO_2-WO_3$ composite, $WO_3$ absorbs visible light creating excited electrons and holes while some of the excited electrons move to $TiO_2$ and the holes remain in $WO_3$. This charge separation reduces electron-hole recombination resulting in an enhancement of photocatalytic activity. Added Ag plays the role of electron acceptor, retarding the recombination rate of excited electrons and holes. In making a mixture of $TiO_2-WO_3$ composite, the mixing route affects the photocatalytic activity. The planetary ball-mill method is more effective than magnetic stirring route, owing to a more effective dispersion of aggregated powders. The volume ratio of $TiO_2(4)$ and $WO_3(6)$ shows the most effective photocatalytic activity in the range of visible light in the view point of effective separation of electrons and holes.

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1221-1227
• /
• 2008

The application of the cellulase gene (celA) as a selection marker of food-grade integration system was investigated in Lactobacillus (Lb.) casei, Lactococcus lactis, and Leuconostoc (Leu.) mesenteroides. The 6.0-kb vector pOC13 containing celA from Clostridium thermocellum with an integrase gene and a phage attachment site originating from bacteriophage A2 was used for site-specific recombination into chromosomal DNA of lactic acid bacteria (LAB). pOC13 was also equipped with a broad host range plus replication origin from the lactococcal plasmid pWV01, and a controllable promoter of nisA ($P_{nisA}$) for the production of foreign proteins. pOC13 was integrated successfully into Lb. casei EM116, and pOC13 integrants were easily detectable by the formation of halo zone on plates containing cellulose. Recombinant Lb. casei EM 116::pOC13 maintained these traits in the absence of selection pressure during 100 generations. pOC13 was integrated into the chromosome of L. lactis and Leu. mesenteroides, and celA acted as an efficient selection marker. These results show that celA can be used as a food-grade selection marker, and that the new integrative vector could be used for the production of foreign proteins in LAB.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.4
• /
• pp.388-396
• /
• 2023

Photoelectrochemical (PEC) water splitting is a vital source of clean and sustainable hydrogen energy. Moreover, the large-scale H₂ production is currently necessary, while long-term stability and high PEC activity still remain important issues. In this study, a GaN-based photoelectrode was modified by an additional NH₃ treatment (900℃ for 10 min) and its PEC behavior was monitored. The bare GaN exhibited a highly crystalline wurtzite structure with the (002) plane and the optical bandgap was approximately 3.2 eV. In comparison, the NH₃-treated GaN film exhibited slightly reduced crystallinity and a small improvement in light absorption, resulting from the lattice stress or cracks induced by the excessive N supply. The minor surface nanotexturing created more surface area, providing electroactive reacting sites. From the surface XPS analysis, the formation of an N-Ga-O phase on the surface region of the GaN film was confirmed, which suppressed the charge recombination process and the positive shift of E_FB. Therefore, these effects boosted the PEC activity of the NH₃-treated GaN film, with J values of approximately 0.35 and 0.78 mA·cm^-2 at 0.0 and 1.23 V_RHE, respectively, and an onset potential (V_on) of -0.24 V_RHE. In addition, there was an approximate 50% improvement in the J value within the highly applied potential region with a positive shift of V_on. This result could be explained by the increased nanotexturing on the surface structure, the newly formed defect/trap states correlated to the positive V_on shift, and the formation of a GaO_xN_1-x phase, which partially blocked the charge recombination reaction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.172-173
• /
• 2012

Currently GaN based LED is known to show high internal or external efficiency at low current range. However, this LED operation occurs at high current range and in this range, a significant performance degradation known as 'efficiency droop' occurs. Auger process, carrier leakage process, field effect due to lattice mismatch and thermal effects have been discussed as the causes of loss of efficiency, and these phenomena are major hindrance in LED performance. In order to investigate the main effects of efficiency loss and overcome such effects, it is essential to obtain relative proportion of measurements of internal quantum efficiency (IQE) and various radiative and nonradiative recombination processes. Also, it is very important to obtain radiative and non-radiative recombination times in LEDs. In this research, we measured the IQE of InGaN/GaN multiple quantum wells (MQWs) LEDs with PSS and Planar substrate using modified ABC equation, and investigated the physical mechanism behind by analyzing the emission energy, full-width half maximum (FWHM) of the emission spectra, and carrier recombination dynamic by time-resolved electroluminescence (TREL) measurement using pulse current generator. The LED layer structures were grown on a c-plane sapphire substrate and the active region consists of five 30 ${\AA}$ thick In0.15Ga0.85N QWs. The dimension of the fabricated LED chip was $800um{\times}300um$. Fig. 1. is shown external quantum efficiency (EQE) of both samples. Peak efficiency of LED with PSS is 92% and peak efficiency of LED with planar substrate is 82%. We also confirm that droop of PSS sample is slightly larger than planar substrate sample. Fig. 2 is shown that analysis of relation between IQE and decay time with increasing current using TREL method.