• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.57-62
• /
• 2000

The photocatalytic degradation of trichloroethylene(TCE) in water on various types of$TiO_2$ was studied. Surface properties of $TiO_2$were characterized by XRD, SEM, and BET in our previous work(23) . $TiO_2$from Aldrich has 100$\%$pure anatase, TiO$_2$from KIER has 100$\%$ pure rutile structure, and P25-TiO$_2$from Degussa has mixed structure of anatase(75$\%$) and rutile(25$\%$) . Firstly, optimum conditions for TCE degradation were examined in this study. Results showed that optimum loading amount of catalyst was 0.1 wt% and recirculation flow rate of mixture(distilled water and TCE) was 200 cc/min. Secondly, the effect of $TiO_2$structure on TCE degradation was examined. Results revealed that anatase structure generally has better photocatalytic activity than rutile structure. Especially, mixed structure(Degussa P25-$TiO_2$) has the highest activity due to small particle size and large specific surface area.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.70-78
• /
• 2000

The effects of recirculated exhaust gas on the characteristics of ;$NO_x$ and soot emissions under a wide range of engine load have been experimentally investigated by a water-cooled, four-cylinder, indirect injection, four cycle and marine diesel engine operating at two kinds of engine speeds. The purpose of the present study is to develop the EGR control system for reducing $NO_x$ and soot emissions simultaneously in diesel engines. The EGR system is used to reduce NOx emissions, and a novel diesel soot removal apparatus with a cylinder-type scrubber for the experiment system which has 6 water injectors(A water injector is made up 144 nozzles with 1.0mm in diameter) is specially designed and manufactured to reduce the soot contents in the recirculated exhaust gas to intake system of the engines. The intake oxygen concentration obtained by the intake air flow and the oxygen concentration in the recirculated exhaust gas, and the exhaust oxygen concentration measured in exhaust manifold are used to analyse and discuss the influences of EGR on NOx and soot emissions. The experiments are performed at the fixed fuel injection timing of $15.3^{\circ}$ BTDC regardless of experimental conditions. It is found that $NO_x$ emissions decrease and soot emissions increase owing to the drop of intake oxygen concentration and exhaust oxygen concentration as EGR rate rises. Also, one can conclude that it is sufficient for the scrubber EGR system with a novel diesel soot removal apparatus to reduce $NO_x$ emissions, but not to reduce soot emissions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.319-319
• /
• 2023

Flows of water in the environment (e.g. in a river or estuary) generally occur in complex conditions. This complexity can hinder a general understanding of flows and their related sedimentary processes, such as erosion and deposition. To gain insight in simplified, controlled conditions, hydraulic flumes are a popular type of laboratory research equipment. Linear flumes use pumps to recirculation water. This isn't appropriate for the investigation of cohesive sediments as pumps can break fragile cohesive sediment flocs. To overcome this limitation, the rotating annular flume (RAF) was developed. While not having pumps, a side-effect is that unwanted secondary circulations can occur. To counteract this, the top and bottom lid rotate in opposite directions. Furthermore, a larger flume is considered better as it has less curvature and secondary circulation. While only a few RAFs exist, they are important for theoretical research which often underlies numerical models. Many of the first-generation of RAFs have come into disrepair. As new measurement techniques and models become available, there is still a need to research cohesive sediment erosion and deposition in facilities such as a RAF. New RAFs also can have the advantage of being automatic instead of manually operated, thus improving data quality. To further advance our understanding of cohesive sediment erosion and deposition processes, a large, automatic RAF (1.72 m radius, 0.495 m channel depth, 0.275 m channel width) has been constructed at the Hydraulic Laboratory at Chungnam National University (CNU), Korea. The RAF has the ability to simulate both unidirectional (river) and bidirectional (tide) flows with supporting instrumentation for measuring turbulence, bed shear stress, suspended sediment concentraiton, floc size, bed level, and bed density. Here we present the current status and future prospect of the CNU RAF. In the future, calibration of the rotation rate with bed shear stress and experiments with unidirectional and bidirectional flow using cohesive kaolinite are expected. Preliminary results indicate that the CNU RAF is a valuable tool for fundamental cohesive sediment transport research.

• Journal of Wetlands Research
• /
• v.20 no.2
• /
• pp.145-154
• /
• 2018

In this study, three pilot-scale wetland systems were built for treating stormwater runoff from asphalt road. Each of the system consists of a settling tank and a vertical flow wetland packed with 25%, 50%, and 75% woodchip as treatment media. According to the analysis of the distributions of particle size, it was found that solids ranging in size $0.52-30{\mu}m$ were predominant in the stormwater runoff. After 24-hours settling, those coarser than $20{\mu}m$ were significantly detained. Further retention, especially for the finer-sized fraction, occurred in the wetland through internal recirculation during the dry day periods. As a primary media of the wetland, woodchip showed a high filtration and attachment capacity for the particulates in pre-settled stormwater, whereas overall amount of solids in the wetland effluent increased due to the detachment of woody elements from the media. This was observed mainly during the initial 75 days of operation, and the size and detachment rate were found to be strongly related with the woodchip packing ratio. The mechanism involving woody particle detachment was modeled as a first-order form. In addition, water quality factors and operational parameters affecting the detachment were analyzed and discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2285-2290
• /
• 2012

This study is about atherosclerosis which occupies the highest rate in many diseases people have and we have studied about atherosclerosis for abdominal aorta. Atherosclerosis is the phenomenon which blood vessel gets narrower, harder and thicker due to the stenosis of colesterol in blood vessel. If it becomes worse, arteries will be hard and blood can't flow smoothly, and even it can reach to death. In this study, the geometric models of the considered stenotic blood flow are two different types of constriction of cross-sectional area of blood vessel; 20 and 45% of constriction in each elastic wall and rigid wall. We have modeled by using finite element method to observe the changes of velocity and pressure. In case of the diameter of blood vessel decreased 45% in elastic wall model, the values of velocity and pressure were higher than the case of 20% and in case of the diameter of blood vessel decreased 45% in rigid wall model, the values of velocity and pressure were higher than the case of 20%. In cases of elastic wall models of the diameters of blood vessels decreased each of 20% and 45%, recirculation zones appeared. This results show understanding of hemodynamic properties depending on stenosed blood vessels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.538-545
• /
• 2020

The outdoor coal storage sheds of thermal power plants are being converted to indoor coal storage sheds worldwide because of the environmental pollution problems in the surrounding areas. On the other hand, indoor coal storage sheds are causing problems, such as indoor coal scattering and harmful gas generation. In this study, the ventilation method of indoor coal storage sheds was analyzed in terms of the internal flow characteristics and ventilation according to the outside wind velocity and direction. CFD analysis was performed based on the actual flow measurement information inside the indoor coal storage sheds. A comparison of the wind speed of 6 m/s and 2 m/s when the outside wind direction was easterly showed that the stream velocity to the monitor louver was faster and the recirculation area was clearer at 6 m/s than at 2 m/s. In addition, the trend of a westerly wind was similar to that of the easterly wind. The ventilation rate according to the wind speed was 13.1 times and 4.4 times for a wind speed of 6 m/s and 2 m/s, respectively. If the wind speed is 2 m/s, the situation does not meet the required number of ventilations per hour in a general plant, and needs to be improved.

• Membrane Journal
• /
• v.24 no.3
• /
• pp.213-222
• /
• 2014

In this study, 2-stage recirculation membrane process was developed for purification of high purity bio-methane for the vehicle fuel application. Pure gas permeation and mixture gas permeation test were done as a function of methane content and pressure in the feed using polysulfone membrane modules. 2-stage membrane plant was designed, constructed in a food waste treatment cite. Dehumidification, dry desulfurization, and desiloxane plants are installed for the removal of $H_2O$, $H_2S$ and siloxane in the biogas. Permeation test were done with the pre-treated methane mixture in terms of methane purity and recovery by adjusting the ratio of membrane area (1:1, 1:3, 2:2) in the first and second membrane modules in the plant. When membrane area of 2 stage increased to $3m^2$ from $1m^2$ at 1-stage membrane area of $1m^2$, the feed rate and $CH_4$ recovery at 95% methane purity were increased from 47.1% to 92.5% respectively. When the membrane area increased two-fold (1:1 to 2:2), $CH_4$ recovery increased from 47.1% to 88.3%. When the feed flow rate was increased, in 1:3 ratio, final purity of the methane is reduced, the methane recovery is increased. When operating pressure was increased, the feed rate was increased and recovery was slightly decreased. From this result, membrane area, feed pressure and feed rate could be the important factor to the performance of the membrane process.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.491-497
• /
• 2011

In this work, we proposed the three different reactor systems for evaluating of synthetic natural gas(SNG) processes using the synthesis gas consisting of CO and $H_2$ and reactor systems to be considered are series adiabatic reaction system, series adiabatic reaction system with the recirculation and cooling wall type reaction system. The maximum temperature of the first adiabatic reactor in series adiabatic reaction system raised to 800. From the these results, carbon dioxide in product gas as compared to other systems was increased more than that expected due to water gas shift reaction(WGSR) and the maximum $CH_4$ concentration in SNG was 90.1%. In series adiabatic reaction system with the recirculation as a way to decrease the temperature in catalyst bed, the maximum $CH_4$ concentration in SNG was 96.3%. In cooling wall type reaction system, the reaction heat is absorbed by boiling water in the shell and the reaction temperature is controlled by controlling the amount of flow rate and pressure of feed water. The maximum $CH_4$ concentration in SNG for cooling wall type reaction system was 97.9%. The main advantage of the cooling wall type reaction system over adiabatic systems is that potentially it can be achieve almost complete methanation in one reactor.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.5
• /
• pp.288-291
• /
• 1988

We have veen already reported the distribution of PSP of bivalve mollusca in southern coast of Korea and also analyzed their characteristics. The purpose of this study was to develop detoxification method for PSP infested sea mussel, Mytilus edulis, by rearing methods or processing treatments. There was no significant detoxification effect when the PSP infested sea mussel was reared in a tank with water recirculation system, but the toxicity of sea mussel rapidly decreased during the rearing time in a water flow system with filtered water. The detoxification rate of PSP during the rearing for 5 days in a water flow system tank with $15-17^{\circ}C$ of sea water was $94\%$ in case of high toxic sample with more than $2,600{\mu}g/100g$ and about $40\%$ in case of low toxic sample with less than $100{\mu}g/100g$. The toxicity of PSP extracted from the sample with 0.1N/ HCl solution was about 2-5 times higher than that extracted with distilled water. When sea mussel contained $100-150{\mu}g-PSP$ per 100g of edible meat was boiled for 30 min with tap water, the toxicity was destroyed as the level of PSP undetected by mouse assay. We can suggest that boiling of sea mussel with tap water was one of the most significant detoxification methods, but it was not enough to be safe in case of extremely high intoxicated sea mussel with PSP. For example, the digestive gland of sea mussel contained more than $9593{\mu}g/100g$ was heated in a can with tap water at $116^{\circ}C$ for 65 min. the residual PSP was more than $170{\mu}g$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.5
• /
• pp.297-302
• /
• 1988

We have veen already reported the distribution of PSP of bivalve mollusca in southern coast of Korea and also analyzed their characteristics. The purpose of this study was to develop detoxification method for PSP infested sea mussel, Mytilus edulis, by rearing methods or processing treatments. There was no significant detoxification effect when the PSP infested sea mussel was reared in a tank with water recirculation system, but the toxicity of sea mussel rapidly decreased during the rearing time in a water flow system with filtered water. The detoxification rate of PSP during the rearing for 5 days in a water flow system tank with $15-17^{\circ}C$ of sea water was $94\%$ in case of high toxic sample with more than $2,600{\mu}g/100g$ and about $40\%$ in case of low toxic sample with less than $100{\mu}g/100g$. The toxicity of PSP extracted from the sample with 0.1N/ HCl solution was about 2-5 times higher than that extracted with distilled water. When sea mussel contained $100-150{\mu}g-PSP$ per 100g of edible meat was boiled for 30 min with tap water, the toxicity was destroyed as the level of PSP undetected by mouse assay. We can suggest that boiling of sea mussel with tap water was one of the most significant detoxification methods, but it was not enough to be safe in case of extremely high intoxicated sea mussel with PSP. For example, the digestive gland of sea mussel contained more than $9593{\mu}g/100g$ was heated in a can with tap water at $116^{\circ}C$ for 65 min. the residual PSP was more than $170{\mu}g$.