• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1156-1162
• /
• 1999

In this paper, the problem of decoding transmitted data sequence with diversity reception in the presence of nondelective fading is studied. The expection maximizaton (EM) algorithm is employed to derive an interactive algorithm. The algorithm performs block-by-block coherent decoding with the aid of pilot symbols. It is shown that the complexity of the algorithm grows linearly as a function of sequence length. The performance of the algorithm is shown to better than that of the conventional pilot symbol aided (PSI) algorithm. Simulation results are presented to assess the performance of the algorithm and the results are compared with that of the conventional PSI alforithm.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.5
• /
• pp.404-410
• /
• 1991

In this paper,a network interface unit of token-passing bus network and its driving software are implemented based on Mini-MAP. This network interface unit performs the function of MAC layer which is responsible for transmission and reception of frames as well as the management of logical ring. The driving software performs the management of data buffer and the report of errors, if ocoured, to the higher layer. Motorola MC68824 of is used as a TBC(Token Bus Controller) and Intel80186 as a CPU for network interface unit. The operation of network interface unit is verified by self-test which checks the functioning of TBC and CPU. In addition each module of driving software is tested to check the functions regarding transmission and reception of frames.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.429-437
• /
• 2008

Multiple-input multiple-output (MIMO) techniques can be used for the spectral efficiency enhancement of the cellular systems, which can be categorized into spatial multiplexing (SM) and spatial diversity schemes. MIMO systems suffer a severe performance degradation due to the intercell interference from the adjacent cells as the mobile terminal moves toward the cell boundary. Therefore for the spectral efficiency enhancement, an appropriate transmission scheme for the given channel environment and reception scheme which can mitigate the intercell interference are required. In this paper, we propose an adaptive signal transmission/reception scheme for the spectral efficiency improvement of $M_R{\times}M_T$ MIMO systems, present the decision criteria for the adaptive operation of the proposed scheme, and demonstrate the performance gain. The proposed scheme performs adaptive transmission using spatial multiplexing and spatial diversity, and adaptive reception using maximal ratio combining (MRC) and intercell spatial demultiplexing (ISD) when the spatial diversity transmission is used at the transmitter. Spatial multiplexing/demultiplexing is performed at the high signal-to-interference ratio (SIR) range, and the transmit diversity in conjunction with the adaptive reception uses either conventional MRC or ISD which can mitigate the $M_R-1$ interference signals, based on the mobile location. For the performance evaluation of the proposed adaptive scheme, the probability density function (pdf) of the effective SIR for the transmission/reception methods in consideration are derived for $M_R{\times}M_T$ MIMO systems. Using the results, the average effective SIR and spectral efficiency are presented and compared with simulation results.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.201-212
• /
• 1999

This paper studies the rapid design and implementation of the medium access control(MAC) and related interface circuits for 802.11 wireless LANs based on the field programmed gate ar-ray(FPGA) technology. Our design is thus aimed to support both the distributed coordination function (DCF) and the point coordination function(PCF) with the aid of FPGA technology. Further-more, in an infrastructure network, some stations may serve as the access points (APs) which may function like a learning bridge. This paper will also discuss how to design for such application. The hardware of the MAC and interface may at least consist of three major parts: wireless transmission and reception processes and in-terface, host(bus) interface, and the interface to the distributed system (optional). Through the increasing popularity of FPGA de-sign, this paper presents how Complex Programmable Logic De-vices(CPLD) can be utilized for speedy design of prototypes. It also demonstrates that there is much room for low-cost hardware prototype design to accelerate the processing speed of the MAC control function and for field testing.

• The Microorganisms and Industry
• /
• v.12 no.2
• /
• pp.14-18
• /
• 1986

Barcterial chemotaxis is a transient response of an organism in a situation where environmental homogeneity has been disturbed by certain chemical compounds. The phenomenon has been described in motile bacterial species including enteric bacteria, Gram-positives(14), Spirochaetes (6) and even Archaebacteria (8). However, most comprehensive studies have been done with Escherichia coli and Salmonella typhimurium. Two analogies to higher eucaryotic sensory phenomena are provided by the study of bacterial chemotaxis. First, bacterial chemotaxis is similar to the stimulus-response of neuronal, immune and sperm cells. Second, studies of individual components involved in the bacterial sensory pathway can contribute to the understanding of the function of receptors, controling signals and molecular comparators in transmembrane signalling system. The bacterial sensory transducer, a chemoreceptor in a broad sense, is a unique entity for studying sensory function in which sensory reception, signalling and adaptation are integrated (7,18).

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.629-634
• /
• 2016

This paper describes the implementation of a ZigBee sensor node that can be utilized as a multiband and machine to machine (M2M) communication gateway. The IEEE 802.15.4-2003 standard was used as the wireless network frequency band. Ember's Type EM357 SoC was used as the transmission and reception device to perform the communication function, and it was also used for both the main M2M gateway and the sensor node. For the implementation of the operating protocol, EmberZNet Stack 4.5.4 from the Ember Corporation was used. The measurement of the reception sensitivity in the receiving module and the actual output signal from the reference were obtained from the transmission of a packet, and the packet included the M2M gateway within the attached ZigBee sensor. The packet error rate was measured as 0% with a -98 dBm reception sensitivity at the ZigBee frequency. In addition, excellent current characteristics of the ZigBee modules were shown by the implementation of the low-power circuit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.577-584
• /
• 2017

Long Term Evolution device-to-device (LTE D2D) is a key technology to mitigate data traffic load in a cellular system. It facilitates direct data exchange between neighboring users, which is preceded by D2D discovery. Each device advertises its presence to neighboring devices by broadcasting its discovery message. In this paper, we develop a mathematical analysis to assess the probability that discovery messages are successfully transmitted at the D2D discovery stage. We make use of stochastic geometry for modeling spatial statistics of nodes in a two dimensional space. It reflects signal to noise plus interference ratio (SINR) degradation due to resource collision and in-band emission, which leads to the discovery message reception probability being modeled as a function of the distance between the transmitter and the receiver. Numerical results verify that the newly developed analysis accurately estimates discovery message reception probabilities of nodes at the D2D discovery stage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.500-507
• /
• 2018

A three-channel radio frequency (RF) monopulse receiver using a data signal with a maximum transmission rate of 274 Mbps was designed. A monopulse receiver using a broadband communication signal was designed to operate in the Ku band, and it consists of a down-conversion module and a signal-processing module. To satisfy the performance of the proposed RF monopulse receiver, a signal-processing function less than the reception sensitivity for each transmission rate according to the adaptive transmission rate is required. To minimize signal reception and mutual frequency interference of various bandwidths, two RF filters were applied. To verify the satisfaction of system requirements, an AWR Corp. simulation tool was used.

• Journal of the Korean housing association
• /
• v.16 no.2
• /
• pp.91-98
• /
• 2005

The purpose of this study was to explore behaviors of spatial usages such as patterns of spatial usages, perception on residential spaces, and furniture arrangement. A questionnaire survey and interview were adopted in this study, and 146 residents living in apartment with 3 bedrooms, stairway access, and 3-bay style in the City of Gwangju. The major findings of this study were that 1) dining-kitchen (DK) was conceived and used as a space not only for dining but also family gathering and guest reception. Dining table without refrigerator was frequently found in furniture arrangement of DK, and refrigerator has been relocated in utility room facing DK. The results imply the need for social interaction that has been growing. Anbang (master bedroom) has been perceived and used as couples' private area, aside from the traditional function of family interaction. A coordination of both bed and wardrobe out of different furniture arrangements was popular in anbang. Living room was used as a multi-purpose room carrying out various activities such as family gathering, guest reception, and housekeeping. Sofa and cabinet were the most common furniture arrangement in living room. The research results are a basis for development residential open housing system.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.05a
• /
• pp.49-55
• /
• 2004

The purpose of this study was to explore typical behaviors of spatial usages such as patterns of spatial usages, perception on residential spaces, and furniture arrangement. A questionnaire survey and interview were adopted in this study, and 146 residents living in apartment with 3 bedrooms, stairway access, and 3-bay style in the City of Gwangju. The major findings of this study were that 1) dining-kitchen (DK) was conceived and used as a space not only for dining but also family gathering and guest reception. Dining table without refrigerator was frequently found in furniture arrangement of DK, and refrigerator has been relocated in utility room facing DK. The results imply the need for social interaction that has been growing. Anbang (master bedroom) has been perceived and used as couples' private area, aside from the traditional function of family interaction. A coordination of both bed and wardrobe out of different furniture arrangements was popular in anbang. Living room was used as a multi-purpose room carrying out various activities such as family gathering, guest reception, and housekeeping. Sofa and cabinet were the most common furniture arrangement in living room. The research results are a basis for residential open housing system.