• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.1026-1031
• /
• 2008

This paper describes the establishment result of high speed data receiving and archiving system(HDRAS) using data receiving card(DRC) developped by SaTReC and low cost RAID(Redundant Array of Independent Disks) storage instead of expensive enterprise RAID storage. We used three S-ATA2 type hard disks and performance test program developped by SaTReC to receive and save data at 350Mbps. Finally, we verified that the HDRAS using low cost RAID storage has a capacity to process received data at 79MB/s(632Mbps).

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.203-208
• /
• 2008

The purpose of this study is to compare the different shapes of condenser of the direct contact heat transfer from the heat pipe condenser to the receiving water using CFD. The heat transfer from the working fluid of the heat pipe to receiving fluid flows through the manifolder is one of the important part in evacuated solar collector system. The retrenchment of the thermal resistance between the heat pipe and the manifolder could increase the thermal performances of the whole system. Recently, direct heat transfer from the heat pipe condenser wall to the receiving water was suggested and accompanied experiments were achieved. This experiment shows the better performances of the direct contact heat transfer analogically. Preceding calculations are carried out for the performance comparison: mesh dependence test, discretization method test and equation model test. with these preceding tests, 4 different shapes of condenser are compared and each case were set up for the same heat flux at the condenser wall. The calculation result shows that the efficiency of the extended surface condenser shape is 10% higher then the that of the others.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1146-1152
• /
• 2003

Satellite television receiving antenna is required for watching TV on the vehicles, ship and car. Recently TV is not only facility as getting information but one of utility in our life. In Korea, already on the service multi-channel satellite TV using excellent visibility and sound, and there are many users using now by fixing antenna. On this thesis, developed ship's satellite TV receiving antenna, the azimuth controlling is adopted azimuth information using gyro sensor and differential of receiving signal strength algorithm, and elevation controlling used gimbals. The result of this research is successfully implemented Korean satellite tracking antenna as performance until ${\pm}$30 degree roll and pitch of ship motion.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.375-377
• /
• 2008

The KOMPSAT2 Terminal Polar Station was recently installed at near North Pole, Tromso, and Toulouse. The K2PS consists of one receiving station and two processing sites. The receiving station has been installed at SvalSat ($N78^{\circ}$, $E15^{\circ}$ ), and the two receiving sites have been installed at KSAT (Kongsberg Satellite Service AS), Tromso, Norway ($N69^{\circ}$ ,$E18^{\circ}$ ) and SISA, Toulouse, France ($N43^{\circ}$ ,$E1^{\circ}$ ). The products ofK2PS system can be classified to two categories: Level 1R product and Level 1G product. The Level 1R product is radiometric corrected product with RPC (Rational Polynomial Coefficients) and the Level 1G product is geometric corrected product with POD (Precise Orbit Data) and PAD (Precise Attitude Data) data based on Level 1R product. To meet a SISA (Spot Image SA)'s requirement, K2PS system has high performance product producing capability. This paper describes overall K2PS systems' production generation flow and the mass production test result of K2PS systems.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1258-1263
• /
• 2009

This paper describes the design and test results of engineering qualification model(EQM) of mass memory unit(MMU) for STSAT-3. The MMU for STSAT-3 having 32Gb mass memory capacity is capable of receiving and transmitting the mission data from MIRIS(Multi-purpose IR Imaging System) and COMIS(Compact Imaging Spectrometer) at 100Mbps and 10Mbps. The performance of EQM MMU was verified by the tests of data receiving from two payloads and data transmission to the data receiving system. Moreover, the vibration and thermal vacuum test was performed to verify the launch vehicle and space environments.

• Journal of Periodontal and Implant Science
• /
• v.44 no.3
• /
• pp.118-125
• /
• 2014

Purpose: The present split mouth study evaluates the effect of nonsurgical periodontal treatment on the gingival crevicular fluid (GCF) leptin level in chronic periodontitis. Methods: Ninety sites from 30 nonobese chronic periodontitis patients were selected and divided as follows: group I, 30 healthy sites receiving no treatment; group II, 30 periodontitis sites receiving scaling and root planing (SRP); and group III, 30 periodontitis sites receiving SRP with tetracycline local drug delivery. At baseline, after GCF sampling and clinical parameter recording, the assigned treatment was performed for the study groups. During recall visits, GCF sampling followed by clinical parameter recording was done for groups II and III. Results: Reductions in the probing depth and the clinical attachment level (CAL) were highly significant at different time intervals (except between day 0 and 45) in both groups II and III. Upon comparison, group III showed significant gain in CAL between day 0 and 15 and between day 0 and 45. After treatment, the reduction in the GCF leptin level was more significant in group III than in group II at day 15 but re-elevated almost to the pretreatment levels at day 45. Conclusions: Nonsurgical periodontal therapies were not effective in maintaining stable reduction in the GCF leptin level during the study period.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.4
• /
• pp.335-341
• /
• 2016

In this paper, we propose the method of controling the turns of a receiving coil for the matching directly to the receiver input impedance(typically $50{\Omega}$) with a maximum wireless power transfer(WPT) efficiency. Based on the presented the expression of the optimum load depending on a system figure of merit, number of the turns of a receiving coil, and proximity effect between conducting lines, the theoretical efficiencies have been compared with the measured ones with a good agreement. The results of this work may be used to realize a allowable maximum efficiency with a simple and low-profile 2-coil WPT system not requiring a separate feeding loop.

• Journal of Veterinary Clinics
• /
• v.13 no.2
• /
• pp.171-176
• /
• 1996

In this study, dldctronic identification system of individual dairy cow was developed for autocatization of stoxkvreeding management. To automize the breeding management, it is necessary to obtain and analyze the individual information distinguished from others perferentially. Electronic identification system can distinguish individual livestock from others with electromagnetic wave signal recognition system. Electoronic identification system consists of transmitter transmitting the oscillated signal and receiver set. The transmitted signal from transmitter clung to individual livestock is received from the receiving antenna and the signal in different according to the established value of the register. By distinct signal recieved from the reciever, wi can distinguish the identity of a livestock from others clearly. This system can manage $2^{12}$ individuals with a reciever theoretically. However in order to reduce the errors by analogous signal, this system uses only triple number and can manage 1365 individuals with a reciever practically. This system can be connevtted to Max 232 and microcomputer for the breeding management efficiently.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1006-1007
• /
• 2015

Recent improvement in semiconductor technology make efficient switching possible at higher frequencies, which benefits the application of wireless inductive energy transfer. However, a higher frequency does not alter the magnetic coupling between energy transmitter and receiver. Due to the still weak magnetic coupling between transmitting and receiving sides that are separated by a substantial air gap, energy circulates in the primary transmitting side without being transferred to the secondary receiving side. This paper proposes an analysis on the system efficiency to determine the optimal impedance requirement for coils, rectifier and DC-DC Converter. A novel Boost DC-DC Converter is designed to provide the optimal impedance matching in WPT(Wireless Power Transfer) system for various loads.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.48.3-49
• /
• 2009

The purpose of this paper is to introduce the KOMPSAT-2 Direct Receiving and Processing System, hereafter DRS, located in Svalbard, Tromso and Toulouse. The KOMPSAT-2 from KOMPSAT-2 satellite and generating preprocessed image data that is a kind of raw image data for standard image production. The products generate from this system are comprised of 1R and 1G product upon having a geographic coordinates. In the following paragraph, it is described that DRS configuration, data processing procedure and product characteristics and then, the value-added image production test such orthoimage is introduced.