• 제목/요약/키워드: Receiving efficiency

검색결과 384건 처리시간 0.024초

Enrichment of Pork with Omega-3 Fatty Acids by Tuna Oil Supplements: Effects on Performance as well as Sensory, Nutritional and Processing Properties of Pork

  • Jaturasitha, S.;Wudthithumkanaporn, Y.;Rurksasen, P.;Kreuzer, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제15권11호
    • /
    • pp.1622-1633
    • /
    • 2002
  • The effects of tuna oil supplementation (0, 1, 2 and 3%) to pig diets on growth and carcass yield as well as meat quality were determined in 40 crossbred pigs. Animals were fattened from 30 to 90 kg of live-weight. Twenty-four hours after slaughter, following various early- and late-post mortem measurements, loin, backfat and belly were prepared from the carcasses. Bacon was produced from the belly part by curing and smoking. Neither performance (feed intake, daily gains, feed conversion efficiency) nor carcass quality (slaughter weight, dressing percentage, lean percentage, nutrient composition of the loin) were significantly affected by tuna oil supplementation. Tuna oil also had no clear effects on early- and late-post mortem meat quality traits, water-holding capacity and tenderness of the M. longissiumus dorsi (LD). Colour traits of LD and backfat, and backfat firmness were not significantly affected by tuna oil, either. However, there was a certain trend to elevated fat contents of LD (and bacon), but not of backfat, with increasing levels of tuna oil in feed. Pigs receiving elevated proportions of tuna oil expressed lower VLDL cholesterol and triglyceride concentrations in blood plasma, whereas the cholesterol content of LD, backfat and bacon did not reflect this trend. Effects of tuna oil on fatty acids in LD, backfat and bacon were often small in extent, except those concerning the long-chain polyunsaturated fatty acids. With 3% tuna oil in the diet, the contents of the particularly desired omega-3 fatty acids, C20:5 and C22:6, were 0.1 and 0.2 g/kg in LD. The corresponding values for backfat and bacon were 2.6 and 12.6 g/kg, and 1.3 and 9.2 g/kg, respectively. Tuna oil supplementation was associated with significant adverse effects on flavour and overall acceptance of bacon (not significant in LD although numerically the same trend was noted), but these effects on sensory ratings were limited in extent. Also shelf life of the products, determined as TBA value after different storage periods at $4^{\circ}C$ in LD, backfat and bacon, was significantly reduced. Overall, the present study suggests that omega-3 fatty acids may be enriched in pork by feeding tuna oil with few undesired side-effects, particularly those on sensory perception and shelf life, suggesting immediate consumption of the products is advisable. Most economically important traits (performance, slaughter and physical meat quality) remained unaffected.

Effect of Formaldehyde Treated Rape Seed Oil Cake Based Diet Supplemented with Molasses on Growth Rate and Histopathological Changes in Goats

  • Sahoo, B.;Walli, T.K.;Sharma, A.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제19권7호
    • /
    • pp.997-1003
    • /
    • 2006
  • An experiment with twenty crossbred goat kids (male) of 2-3 months old, weighing about 12 kg was conducted to study the effect of feeding formaldehyde treated rape seed oil cake based diet supplemented with molasses on growth rate and histopathological changes of different organs. Goats were randomly divided into four groups of 5 animals each and were individually fed for a period of 120 days. The animals in group I (URC) and II (URCM) were fed concentrate mixture (CM-I) containing untreated rape seed oil cake (30%) while, the animals in group III (TRC) and IV (TRCM) were offered concentrate mixture (CM-II) containing formaldehyde treated rape seed oil cake. Further, molasses as energy source was additionally supplemented with the concentrate mixture at the rate of 8% of concentrate mixture on dry matter basis to animals in group II and IV. All the animals were maintained on roughage (Berseem hay:wheat straw = 2:1) and concentrate in 50:50 ratio. Average daily gain (g/d) of animals in group IV was significantly (p<0.05) higher than that in group I., but at par with group II and III. Feed conversion efficiency was also significantly (p<0.05) higher in group IV (10.14) than group I and II but at par with group III. The growth rate however increased by 50.2% in group IV showing more consistency in maintaining highest growth rate due to better balance of nutrients. At the end of four months of feeding trial, two animals from each group were sacrificed for histopathological study of different organs. Significant histopathological changes in liver, heart, lungs tissue of animals fed untreated rape seed oil cake diet were recorded which were totally absent in the organ of animals fed formaldehyde treated cake. The liver tissue of goats receiving control diet (containing untreated rape seed oil cake) were found to be associated with engorged central vein and blood vessels. Hepatocytes were swollen, pale and degenerated with cellular infiltration and fibrosis of portal areas. The muscles of heart were found to have intermyofibral edema. Emphysema accompanied by dilated and ruptured alveoli was also recorded in lung tissue. However, histopathological examination of various tissues of goats fed formaldehyde treated cake diet did not exhibit any degenerative changes. Additional supplementation of molasses with or without treated cake diet, apparently did not have any significant effect on ameliorating the above degenerative changes.

M2M 환경에서 신원기반 암호기법을 활용한 인증기법에 관한 연구 (A Study of Authentication Method for Id-Based Encryption Using In M2M Environment)

  • 진병욱;박재표;이근왕;전문석
    • 한국산학기술학회논문지
    • /
    • 제14권4호
    • /
    • pp.1926-1934
    • /
    • 2013
  • M2M(Machine-to-Machine Communication)은 한 기기가 비슷한 다른 기기와 유선 혹은 무선으로 통신하는 기술로서 환경의 특성 상 저전력, 소규모, 저렴한 가격, WAN, WLAN 등 네트워크를 통하여 사물간의 통신으로 정의하고 있다. 또한 사람의 개입이 없이도 운영이 가능할 수 있는 특징이 요구된다. 그러나 사물통신 기기들의 요구사항으로 인하여 무선 통신 등에 취약점은 가지게 되고, 각 기기를 관리 혹은 제어하는 것에 대한 어려움으로 인한 취약점이 있다. 본 논문은 M2M 환경에서 Device 및 Gateway와 Network Domain간의 안전한 인증 프로토콜 기법을 제안하였다. 제안 프로토콜은 ID-Based Encryption 기반으로 인증 하며, Network Domain안에 Access Server 및 Core Server 간의 세션키를 생성한다. 그리고 생성한 세션키를 활용하여 상호간에 데이터를 송 수신하고, 키 갱신 프로토콜을 추가하여 자동으로 식별값을 갱신한다.

2D 애니메이션과 3D 애니메이션의 융합: 캐릭터와 제작 기법을 중심으로 (A study on convergence of 2D and 3D animation : Focused on character and expression technique)

  • 김민중;곽노준
    • 만화애니메이션 연구
    • /
    • 통권48호
    • /
    • pp.45-67
    • /
    • 2017
  • 현대에 제작되는 다수의 애니메이션에는 3D 기술이 적용되어 있으며, 시간이 갈수록 제작기술 또한 더욱 다양해지고 정교해지고 있다. 존 앨런 라세터(John Alan Lasseter)가 CG 애니메이션 기술에 대한 연구를 해야 한다고 주장했을 때 많은 사람이 걱정했던 것처럼 가까운 미래에 우리의 일자리를 컴퓨터에 빼앗길 지도 모르는 일이다. 현 시점에서 불안한 미래가 현실이 될 수도 있다는 걱정을 하는 것은 시기상조일 수도 있으나 현재 다수의 애니메이션 작품이 3D 기술을 이용하여 제작되고 있다는 사실에 대해서는 이견이 없을 것이라고 생각한다. 1995년 <토이스토리>(Toy Story)가 상영된 이후 3D 애니메이션 제작 기술은 급속히 발전하기 시작했고, 현재는 컴퓨터 그래픽 기술이 적용된 부분을 실사촬영 부분과 구별하기 힘들 정도로 정교하게 발전했다. 한편, 디즈니의 2D 애니메이션 부분은 쇠퇴의 길로 접어드는데 이는 당시 3D 애니메이션의 등장이 새로운 표현기법으로 인식되어 관객들로부터 주목을 받음과 더불어 작업과정의 효율성이 상대적으로 2D 애니메이션 보다 우월하였기 때문이다. 최초의 극장용 작품이 등장한지 20여년 만에 3D 애니메이션 제작 기술이 주류를 형성하고 있는 애니메이션 산업계의 현실을 반영하여, 우리는 2D 애니메이션 기술의 퇴보를 받아들여야만 하는 것일까? 2D 애니메이션 제작기술은 오랜 역사를 갖고 있으며 여전히 관객들에게 매력적이기 때문인지 최근에는 2D와 3D애니메이션 기술을 접목하려는 시도를 어렵지 않게 찾아볼 수 있다. 본 논문은 2D 핸드 드로운 캐릭터를 3D 애니메이션에 등장시키는 기법에 대해서 연구하고자 하며, 이를 통해 앞으로 2D 애니메이션 기술과 3D 애니메이션 기술의 접목이 더욱 활발하게 이루어지길 바란다.

시강우량을 이용한 필지별 유출-유사 평가 시스템 및 BMPs 평가 모듈 개발 및 적용성 평가 (Development and Evaluation of Runoff-Sediment Evaluation System and BMPs Evaluation Modules for Agricultural Fields using Hourly Rainfall)

  • 금동혁;류지철;최재완;신민환;신동석;천세억;최중대;임경재
    • 한국물환경학회지
    • /
    • 제28권3호
    • /
    • pp.375-383
    • /
    • 2012
  • Soil erosion has been emphasized as serious environmental problem affecting water quality in the receiving waterbodies. Recently, Best Management Practices (BMPs) have been applied at a field to reduce soil erosion and its effectiveness in soil erosion reduction has been monitored with various methods. Although monitoring at fields/watershed outlets would be accurate way for these ends, it is not possible at some fields/watersheds due to various limitations in direct monitoring. Thus modeling has been suggested as an alternative way to evaluate effects of the BMPs. Most models, which have been used in evaluating hydrology and water quality at a watershed, could not reflect rainfall intensity in runoff generation and soil erosion processes. In addition, source codes of these models are not always public for modification/enhancement. Thus, runoff-sediment evaluation system using hourly rainfall data and vegetated filter strip (VFS) evaluation module at field level were developed using open source MapWindow GIS component in this study. This evaluation system was applied to Bangdongri, Chuncheonsi to evaluate its prediction ability and VFS module in this study. The NSE and $R^2$ values for runoff estimation were 0.86 and 0.91, respectively, and measured and simulated sediment yield were 15.2 kg and 16.5 kg indicating this system, developed in this study, can be used to simulate runoff and sediment yield with acceptable accuracies. Nine VFS scenarios were evaluated for effectiveness of soil erosion reduction. Reduction efficiency of the VFS was high when sediment inflow was small. As shown in this study, this evaluation system can be used for evaluation BMPs with local rainfall intensity and variations considered with ease-of-use GIS interface.

하천유량측정의 효율성 향상을 위한 범용 전자파표면유속계 개발 (Development of Microwave Water Surface Current Meter for General Use to Increase Efficiency of Measurements of River Discharges)

  • 김영성;노준우;최광순
    • 생태와환경
    • /
    • 제47권3호
    • /
    • pp.225-231
    • /
    • 2014
  • 본 연구는 홍수기 유량측정의 어려움을 극복하고자 물과 비접촉식으로 유속을 측정하여 유량을 산정하는 전자파표면유속계(microwave water surface current meter, MWSCM)의 성능개선 제품인 범용 MWSCM에 대하여 소개하고자 하였다. 기존에 사용 중인 MWSCM은 홍수용으로써 연중 활용도가 낮아 이것의 이용성을 높이고자 성능을 개선하였다. 유속측정 범위를 확장하여 평 갈수기에도 하천 유량측정이 가능하게 하였다. 즉 기존 홍수용 MWSCM의 유속측정 범위가 $0.5{\sim}10.0ms^{-1}$이었던 반면, 금번에 개발된 범용 MWSCM은 $0.03{\sim}20.0ms^{-1}$로 홍수기 및 평수기 측정이 가능하도록 성능을 개선하였다. 이를 위해서 사용주파수의 변경($10GHz{\rightarrow}24GHz$), 안테나 및 송수신부 회로가 새롭게 설계 제작되었다. 이와 더불어 기존 홍수용 MWSCM 사용자들의 개선요구사항-기기 경량화, 유속 안정화, 자체점검기능, 저전력, 방수 및 방습-을 파악하여 반영함으로써 현장에서 유량을 측정하기에 용이한 기기로 개발하였다.

해양플랜트 전력시스템의 고조파 비교분석에 관한 연구 (A Comparative Study on Power System Harmonics for Offshore Plants)

  • 김덕기;이원주;김종수
    • 해양환경안전학회지
    • /
    • 제22권7호
    • /
    • pp.900-905
    • /
    • 2016
  • 해양구조물에 전기 안전사고가 급증하면서 전력시스템 고조파 분야가 최근 많은 관심 받고 있다. 이것은 주로 비선형 (또는 고조파 생성) 부하가 일반적인 산업플랜트 전력시스템에서 계속 증가되고 있기 때문이다. 해양플랜트에서는 전력시스템의 안전설계로 인하여 고조파 문제의 발생률은 낮지만, 고조파 문제에 대한 인식은 전력시스템 설계의 신뢰성을 향상시키는데 여전히 도움이 될 수 있다. 전력시스템에 고조파 문제가 드물게 발생되는 경우, 이는 생성된 고조파의 크기 혹은 전력시스템의 공진 때문이다. 이 고조파 비교분석에 관한 연구는 전력부하를 고려한 부유식 액화천연가스 생산 저장 하역 (FLNG) 설비의 하역 운전 시나리오에 대한 전기적인 구성으로 비교분석하였다. 전기적인 네트워크 구성은 전기적인 네트워크 부하 흐름에서 볼 수 있다. 본 연구는 해양플랜트 전력시스템의 안전을 보장하기 위해 전기 모터 시스템의 고조파 효율에 초점을 맞추어 전력시스템 성능을 시뮬레이션을 통해 검증하였다. 또한, 본 연구의 설계분야에서도 운전 및 유지 보수의 향상시키기 위해 FLNG 설비의 전력시스템을 분석하였다.

가야금의 실시간 음 합성을 위한 멀티코어 프로세서 구현 (Multi-Core Processor for Real-Time Sound Synthesis of Gayageum)

  • 최지원;조상진;김철홍;김종면;정의필
    • 정보처리학회논문지A
    • /
    • 제18A권1호
    • /
    • pp.1-10
    • /
    • 2011
  • 물리적 모델링은 실제 악기음과 유사한 고음질의 음을 합성하는 방법으로 많은 연구가 진행되어 왔다. 그러나 물리적 모델링은 악기의 소리를 합성할 때 필요한 수많은 파라미터들을 동시에 계산해야 하기 때문에 동시 발음수가 높은 악기의 경우 실시간 처리에 문제가 발생할 수 있다. 이러한 문제를 해결하기 위해 본 논문에서는 전통 현악기인 가야금의 음 합성 알고리즘을 실시간으로 처리 가능한 단일 명령어 다중 데이터(Single Instruction Multiple Data, SIMD) 방식의 멀티코어 프로세서를 제안한다. 제안하는 SIMD기반 멀티코어 프로세서는 가야금의 12개현을 제어하기 위해 12개의 프로세싱 엘리먼트(Processing Element, PE)로 구성되어 있다. 각각의 프로세싱 엘리먼트는 해당되는 가야금 현을 모델링하며, 각 현의 여기신호와 파라미터를 음 합성 병렬 알고리즘의 입력으로 받아 동시에 12개 현의 합성된 음을 실시간으로 생성할 수 있다. 표본화 비율을 44.1kHz로 설정하고 16비트 양자화 데이터의 음을 합성한 모의실험 결과, 제안한 SIMD기반 멀티코어 프로세서를 이용한 합성음은 원음과 매우 유사하였으며, 상용 프로세서(TI TMS320C6416, ARM926EJ-S, ARM1020E)보다 실행 시간에서 5.6~11.4배, 에너지 효율에서 553~1,424배의 향상을 보였다.

RFID 냉동창고 관리시스템의 품질향상을 위한 슈퍼바이저 시스템 개발 (Supervisor System Development for Improving Quality of RFID Cold Storage Management Systems)

  • 문미경
    • 한국컴퓨터정보학회논문지
    • /
    • 제19권6호
    • /
    • pp.109-117
    • /
    • 2014
  • 냉동창고는 일반 창고와 달리 냉각설비를 갖춘 단열된 건물의 창고로서, $0^{\circ}C$이하의 다양한 유형의 냉장/냉동고에 물품들을 입고, 적재, 출고하는 일련의 업무가 운영된다. 최근 냉동창고에 RFID 기술이 도입됨으로써 창고 내 물품관리를 네트워크화, 지능화할 수 있게 되었다. 그러나 RFID 시스템으로 인한 물리적 인식 실패뿐만 아니라 논리적 인식 실패로 인한 물류정보 불일치가 발생하게 되면 RFID 냉동창고 관리시스템의 신뢰도가 떨어지고 업무의 효율이 감소하게 된다. 본 논문에서는 RFID 냉동창고 관리 시 발생하는 다양한 종류의 오류들을 즉각적으로 탐지할 수 있는 슈퍼바이저 시스템의 개발내용에 대해 기술한다. 이는 RFID 냉동창고 관리업무상 발생할 수 있는 오류들의 제약조건들을 미리 설정하고 오류의 알림을 받을 수 있는 마스터 슈퍼바이저와 냉동창고 내 업무를 처리하는 작업자가 오류에 대한 알림을 받고 그 자리에서 오류를 직접 확인하고 처리할 수 있는 모바일 슈퍼바이저로 구성된다. 본 논문에서는 슈퍼바이저 시스템이 RFID 냉동창고 관리시스템 상의 오류들을 탐지/분석하는 시간을 줄임으로써 신뢰성을 높이기 위한 평균복구시간을 줄일 수 있음을 보인다.

전산 시스템이 도입된 일개 종합병원 간호단위의 간호시간 산정에 관한 연구 (A Study on the Nursing Time in Nursing Units in Hospital to Applied Computer System)

  • 장춘자;강익화;이은자;김병연;이민숙
    • 대한간호학회지
    • /
    • 제25권3호
    • /
    • pp.441-456
    • /
    • 1995
  • This study was done to determine direct and in-direct nursing time in nursing units in hospital to ap-plied computer system and expect that those results contribute to measure efficiency of nursing practice and planning of nursing manpower. The design for study was a descriptive study. The study results are as follows. 1. Patients admitted to the Internal Medicine and General Surgery units were grouped into four. Group Ⅰ, 32.9% of the total patients, consisted patients whose condition was considered minor Group Ⅱ, 26.1%, was of those whose condition was considered moderate, Group Ⅲ, 41. 8%, moderate severe and Group Ⅳ, 29.2% the most severe. 2. Nursing intervention times by care type were as follows four minutes spent for suction eight minutes, for simple position change, ten minutes, for sheet change, seven minutes for a hot or cool compress, six minutes for dressing change, four minutes for Ⅰ.M. injection, six minutes for patient health education and five minutes for body temperature check. 3. Direct care time by patient group revealed the following : Group Ⅰ rquired 191.4 minutes, Group Ⅱ required 331.1 minutes, Group Ⅲ rquired 499.4 minutes, and Group Ⅳ rquired 1328.0 minutes. 4. The ratio of time for adequate nursing care and direct care time in the Internal Medicine and Goneral Surgery units was 67.4%-83.4% and 94.7%-99.3% in the Intensie Care Unit. 5. Average daily direct care time per patient was 5.5 hours in the Internal Medicine unit and 11.5 hours in the Intensive Care Unit. 6. Time spent in indirect care was 48.3 minutes for computer recording,34.8 minutes for giving and receiving patient information for shift duty, 28.0 minutes for eating and resting time, 26.6 minutes for transfering and identifying patients, 25.6 minutes for identifying Doctor's order, 23.9 minutes for recording vital signs. 7. Time spent in indirect care was 282.2 minutes by head nurses (charge nurses), 258.7 minutes by nurses and 261.6 minutes by nurse aids. 8. The average nurse's workload was 9.3 hours and daily indirect nursing time required 46.3%-50. 5% of above mentioned workload time. .9. The average daily indirect care time per patient was expected to be 57.7 minutes in the Internal Medicine unit and 3.3 hours in the Intensive Care Unit.

  • PDF