• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.205-208
• /
• 2002

When establishing the submarine optical fiber table between international and domestic, marine survey in advance it grasps the submarine geological features which is accurate and a depth of water condition. And the route which is safe for selecting and submarine optical fiber cable laying it is a work which secures an ease one location. If also, the PLGR the submarine of optical fiber table root the sea contamination material (rope, wire and net) it removes in advance and if the submarine of the optical fiber cable ease it does to arrive safely. And it is a work the Plough and ROV laying work hour laying work efficiency improvement and laying equipment it will be able to protect. So, This paper presents the monitoring system of ship information management and operation for marine survey and PLGR work in submarine optical fiber table construction enterprise. In order to achieve these purpose, overall serial multi-port communication modulo of configuration, realtime processing for management and operation of receiving data, realtime graph and a printout are described.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.113-120
• /
• 2006

A node of mobile IPv6 moving foreign networks needs authentication process to support right services against from security threat. AAA is a trust infrastructure that authenticates, authorizes, and accounts nodes receiving a network service. And Mobile IPv6 Working Group recommends use of AAA infrastructure to authenticate mobile nodes. Event though AAA infrastructure provides strong authentication functions, it should exchange a lot of messages to authenticate mobile nodes every movement. The exchange of lots of messages causes latency and it is interfered with realization of real-time communication. This paper proposes an authentication method of improved speed using hash value of mobile node to reduce authentication latency. Directly after movement, a mobile node applying a Proposed method uses extended existing security authentication for a while and deletes the establishment latency of new security authentication. Performance evaluation of a proposed method verifies the efficiency through the analysis of cost comparison with other methods. The conclusion of performance evaluation is that the proposed method gets more 25% performance improvement than a general method when a mobile node moves another subnet.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.129-134
• /
• 2007

In 1996, GS E&C became the first in the industry to adopt a Project Management System using EVM(Earned Value Management) to link schedule with profit/loss. In 2006, the TPMS(Total Project Management System) was completed by adding the concept of Lean Construction and JIT(Just In Time) to the Project Management System. This was done with the purpose of reducing waste and creating optimal work processes. This has been implemented on all sites and has enabled drastic increase of productivity. The portal provides customized information to the client, inspector and subcontractor personnel. Since various parties are receiving information that suits their requirements and is easy to use, usage has increased and since they are on the same platform, quick decisions and information sharing is possible. The purpose of the PMIS's success model in construction projects, this paper tests and proves the TPMS's efficiency and productivity to Dongnam Distribution Complex project.

• Journal of Embryo Transfer
• /
• v.9 no.1
• /
• pp.23-29
• /
• 1994

The long term goal of this research is to develop an efficient procedure for large scale production of genetically identical or cloned animals. To improve nuclear transpalntation efficiency in the rabbit, this study evaluated the age of nuclear recipient oocytes on the different steps of nuclear transplantation. The ovulated oocytes in different ages were collected from the superovulated does by flushing oviducts with Dulbecco's phosphate buffered saline(D-PBS) supplemented with 10% fetal calf serum(FCS) from 13 to 15, 17 to 20 and 23 to 26 hours after hCG injection. The denuded oocytes were used as nuclear recipient cytoplasm following enucleation by micromanipulation. The blastomeres separated from the 8-cell embryos were used as nuclear donor. The enucleated oocytes receiving a blastomere in the perivitteline space were fused in the 0.28 M mannitol solution at 1.5 kV/cm, 60 sec for three times. The fused oocytes were co-cultured with the monolayered rabbit oviductal epithelial cells in TGM-199 solution with 10% FCS for 72 hours at 37$^{\circ}C$ in a 5% $CO_2$ incubator. The cultured nuclear transplant embryos and in vivo developed embryos collected at 72 hours after hCG injection were stained with Hoechst 33342 dye. Their cell numbers were counted under a fluorescent microscope. The results obtained were summarized as follows ; 1. The aged oocytes(20 hrs. post hCG) showed significantly(P<0.05) higher fusionrates(70 ~ 90%) than the recently ovulated oocytes(30.8%) 2. The aged oocytes which were electrically activated and fused at 20 hours developed to blastocyst at significantly(P<0.05) high rate, while none of the recently ovulated oocytes developed to blastocyst. 3. Even though the aged oocytes at 23~26 hours showed higher fusion rate(85.7%), not only they were inadequate to manipulate but also their developmental potential to blastocyst was highly impaired. 4. The developmental potential in vitro of nuclear transplant embryos was significantly retarded than in vivo deveolped embryos.

• Journal of Biomedical Engineering Research
• /
• v.40 no.6
• /
• pp.223-229
• /
• 2019

The number of knee-related disease patients and knee joint surgeries is steadily increasing every year, and for knee rehabilitation training for these knee joint patients, it is necessary to strengthen the muscle of vastus medialis and quadriceps femoris. However, because of the cost and time-consuming difficulties of receiving regular hospital treatment in the course of knee rehabilitation, we developed knee exoskeleton using rapid prototype for knee rehabilitation with feedback from the electromyogram (EMG) and inertia motion unit (IMU) sensor. The modules was built on the basis of EMG and an IMU sensor applied complementary filter, measuring muscle activity in the vastus medialis and the range of joint operation of the knee, and then performing the game based on this measurement. The IMU sensor performed up to 97.2% accuracy in experiments with ten subjects. The functional game contents consisted of an exergaming platform based on EMG and IMU for the real-time monitoring and performance assessment of personalized isometric and isotonic exercises. This study combined EMG and IMU-based functional game with knee rehabilitation training to enable voluntary rehabilitation training by providing immediate feedback to patients through biometric information, thereby enhancing muscle strength efficiency of rehabilitation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.1
• /
• pp.37-45
• /
• 2011

Mandae watershed in Gangwon province has been known as one of soil erosion hot spot watersheds within Hanggang basin. Thus numerous efforts have been made to reduce soil erosion and pollutant loads into receiving watershed. However, proper best management practices have not been suggested because no monitoring flow and water quality data were available. Thus, modeling technique could not be utilized to evaluate water quality issue properly at Mandae watershed to develop and implement the best management practices. In this study, the SWAT model was applied to the Mandae watershed, Gangwon province to evaluate the SWAT prediction ability and water quality improvement with vegetated filter strip (VFS) in this study. The Nash-Sutcliffe model efficiency (NSE) and Coefficient of determination ($R^2$) values for flow simulation were 0.715 and 0.802, respectively, and the NSE and $R^2$ values were 0.903 and 0.920 for T-P simulation indicating the SWAT can be used to simulate flow and T-P with acceptable accuracies. The SWAT model, calibrated for flow and T-P, was used to evaluate water quality improvement with the VFS in agricultural fields. It was found that approximately 56.19 % of T-P could be reduced with vegetated filter strip of 5 m at the edge of agricultural fields within the watershed (34.86 % reduction with VFS of 1m, 48.29 % with VFS of 3 m). As shown in this study, the T-P, which plays key roles in eutrophication in the waterbodies, can be reduced with proper installation of the VFS.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.251-257
• /
• 2015

Heavy oil production is receiving significant attention because of increased demands for thermal power generation systems of the diesel engine and boilers. However, asphaltene, which is a heavy oil components (6-8 wt%), reduces the heat efficiency of the fuels owing to its agglomerated sludge of asphaltene during the burning process. Therefore, for hassle-free operation, we should develop asphaltene dispersants to suppress the formation of the sludge. We prepare variable salt-type polymeric dispersants using poly(isobutenyl succinic anhydride) and poly(amine) through both condensation esterification and acid-base neutralization reactions, which we subsequently evaluate for dispersing performance, using Turbiscan measurement. Total acid number (TAN) and total base number (TBN) of 75Lec-25SynDis.2 composed of lecithin and the prepared polymeric salt having the ratio of 3 : 1 are 18.9 and 33.7 mg KOH/g, respectively, which are comparable to those of the commercial dispersants (15.8 and 26.5 mg KOH/g). We determine the initial turbidity observed for 15 min of the polymeric dispersant was determined with transmittance (%), which can be calculated to separability number (SN). The SN value of 75Lec-25SynDis.2 is close to zero, which is superior to that of commercial dispersants and lecithin (0.015 and 0.017).

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.585-596
• /
• 2012

PVDF(poly vinylidene fluoride) and P(VDF-TrFE)(poly vinylidene fluoride-tetrafluoroethylene) are the typical piezoelectric polymers with unique properties. Even they are inferior to conventional piezoelectric ceramics PZT in electromechanical conversion efficiency and interior loss, though they are superior in receiving sensitivity and frequency bandwidth. Their acoustic impedances are relatively close to water or biological tissue and it is easier to make thin film than other piezoelectric materials. Futhermore, the film is so flexible that it is easy to attach on a complex surface. Those properties are suitable for the ultrasound transducers which are useful for medical and biological application, so that various types of polymer transducers have been developed. In this paper, several important considerations for design and fabrication of piezoelectric polymer transducers were described and their effect on the transducer performance were demonstrated through the KLM model analysis. Then, it was briefly reviewed about the structures of the polymer transducers developed for obtaining images as well as the characteristics of the images in several important medical and biological application fields.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.4077-4091
• /
• 2017

This paper presents the design of a broadcasting scenario and system for an 8K-resolution content. Due to an 8K content is four times larger than the 4K content in terms of size, many technologies such as content acquisition, video coding, and transmission are required to deal with it. Therefore, high-quality video and audio for 8K (ultra-high definition television) service is not possible to be transmitted only using the current terrestrial broadcasting system. The proposed broadcasting system divides the 8K content into four 4K contents by area, and each area is hierarchically encoded by Scalable High-efficiency Video Coding (SHVC) into three layers: L0, L1, and L2. Every part of the 8K video content divided into areas and hierarchy is independently treated. These parts are transmitted over heterogeneous networks such as digital broadcasting and broadband networks after going through several processes of generating signal messages, encapsulation, and packetization based on MPEG media transport. We propose three methods of generating streams at the sending entity to merge the divided streams into the original content at the receiving entity. First, we design the composition information, which defines the presentation structure for displays. Second, a descriptor for content synchronization is included in the signal message. Finally, we define the rules for generating "packet_id" among the packet header fields and design the transmission scheduler to acquire the divided streams quickly. We implement the 8K broadcasting system by adapting the proposed methods and show that the 8K-resolution contents are stably received and serviced with a low delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.4092-4104
• /
• 2017

In this paper, an efficient 4K and 8K UHD(Ultra High Definition) transmission scheme is proposed on the convergence networks with broadcasting and LTE(Long Term Evolution) by using CoMP(Coordinated Multi-Point). A video data is compressed and divided into BL(Base Layer), E(Enhanced layer)1, E2 and E3 by scalable HEVC(High Efficiency Video Coding). The divided layers can be combined by the scalable HEVC such as mobile HD, full HD, 4K and 8K UHD(Ultra High Definition). The divided layers are transmitted through the convergence networks with DVB-T2(Digital Video Broadcasting-$2^{nd}$ Generation Terrestrial) broadcasting system and LTE CoMP. This scheme transmits mobile HD and full HD layers through DVB-T2 broadcasting system by using M-PLP(Multiple-physical Layer Pipes), and adaptively transmits 4K or 8K UHD layer through LTE CoMP with MMT(MPEG Media Transport) server. An adaptive transmitting and receiving scheme in the LTE CoMP system provides 4K or 8K UHD layer to a user according to the user status. The proposed scheme is verified by showing the system-level simulation results which is better BER(bit-error-rate) performance than the conventional scheme. The results show that the proposed scheme provides the stable video contents to the user especially at the cell edge.