• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.409-416
• /
• 2008

Recently, KARI developed "KOMPSAT-2 Terminal for Polar Station" which is high performance system newly required for stimulating KOMPSAT-2 application. The KOMPSAT-2 Terminal for Polar Station consists of one receiving system and two processing systems. The receiving system has been installed at Svalbard Satellite Station located at Norwegian Svalbard island. and the two receiving systems have been installed at Kongsberg Satellite Service AS located at Tromso Norway and Spot Image SA located at Toulouse France respectively. In this paper overall items of KOMPSAT-2 Terminal for Polar Station, which includes requirements, designs and operation concepts, are to be addressed with the verification result on its performance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.31-38
• /
• 2012

In this paper, requirements of GNSS receiver station installation are derived for optimizing the performance of network based GNSS precise positioning by concern of international organization(IGS, NGS) recommendation. Also a analysis method of network based GNSS precise positioning is suggested in order to evaluate the availability depending on various network configurations. To evaluate network candidates, a performance evaluation method is proposed for positioning of users according to a geometric configuration and the baseline distance. After the proposed method is used to Ochang region that is a the test area 6 network candidates are derived and the performance of positioning was analyzed. Finally, Ansung, Gongju, Eumsung, Boeun network configuration was selected as the best positioning performance. An optimal Receiving station network was selected using the proposed method.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.461-465
• /
• 2004

In this paper, we examined receiving parameters of IMT-2000 receiving system and also analyzed them through simulation based on the minimum specification of DCS and PCS mobile station. As a result of simulation, noise figure which is the parameter of specification of the receiving sensitivity is 7.21dB, 6.03dB, and 7.89dB in case of DCS, PCS and IMT-2000 respectively. Therefore we found the receiving sensitivity of IMT-2000 mobile station lower than that of DCS and PCS.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.375-377
• /
• 2008

The KOMPSAT2 Terminal Polar Station was recently installed at near North Pole, Tromso, and Toulouse. The K2PS consists of one receiving station and two processing sites. The receiving station has been installed at SvalSat ($N78^{\circ}$, $E15^{\circ}$ ), and the two receiving sites have been installed at KSAT (Kongsberg Satellite Service AS), Tromso, Norway ($N69^{\circ}$ ,$E18^{\circ}$ ) and SISA, Toulouse, France ($N43^{\circ}$ ,$E1^{\circ}$ ). The products ofK2PS system can be classified to two categories: Level 1R product and Level 1G product. The Level 1R product is radiometric corrected product with RPC (Rational Polynomial Coefficients) and the Level 1G product is geometric corrected product with POD (Precise Orbit Data) and PAD (Precise Attitude Data) data based on Level 1R product. To meet a SISA (Spot Image SA)'s requirement, K2PS system has high performance product producing capability. This paper describes overall K2PS systems' production generation flow and the mass production test result of K2PS systems.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.113-128
• /
• 2021

In this paper, we present a simple ground receiving station as an educational method for a satellite system. Our system is produced similarly to the existing fixed ground station in terms of function by using satellite communication technology and related software commonly used in the amateur radio field. In addition, we conducted operation test to receive signals from operating satellites and confirmed the possibility of using them as a way to educate satellite systems, such as understanding ground station systems through satellite reception experience and satellite state information acquisition, and further designing satellite systems.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.573-577
• /
• 2002

The Landsat Program is the longest running enterprise for acquisition of imagery of the Earth from space. The first Landsat satellite was launched in 1972 and the most recent, Landsat 7, was launched on April 15, 1999. The Landsat satellites have acquired millions of images. The Landsat 7 receiving station is installed at more than 25 sites and will be installed in Korea. This paper will address the work being carried out for the development of image receiving and processing system for the Landsat 7 image data, which will be used at ground station of Landsat 7 in Korea.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.4
• /
• pp.17-26
• /
• 2013

In this paper, a configuration procedure of a transportation infrastructure system for GNSS based very precise real-time positioning is proposed. This infrastructure system consists of several receiving station, a central station, and communication sub-systems. The required performance, design, implementation and verification of each sub-system are explained respectively. The required performance can be broken down into accuracy, integrity, stability, processing time. The design of the each sub-system is performed in accordance with the required performance and each sub-system is built with regard to the design. Lastly the implemented system is verified in comparison with the required performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.208-216
• /
• 2014

Ground station in lunar mission is responsible to receive telemetry signal including sensor data from lunar orbiter and/or lander. At preliminary stage of developing this ground station, receiving performance such as antenna size and noise temperature should be designed on the basis of link budget analysis. When the antenna of ground station is pointing to the moon to communicate with lunar orbiter and/or lander, noise level is supposed to be increasing due to the lunar flux density. It means that the moon is working as a noise source to degrade receiving performance when antenna is pointing to the moon. Antenna noise temperature contributed by the moon was firstly calculated and secondary validated by using test configuration in this paper. Consequently, it was shown that antenna noise temperature caused by the moon was quietly matched with measured one and G/T degradation of receiving system in lunar mission can be calculated depending on antenna size and frequency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1520-1525
• /
• 2009

In this paper, we study and simulate the suggested position control system using GPS and USN to replace the existing control system of a crane. For the correct approach, the position control system of a crane is divided into the control system of the ground station and the mobile station The hardware is comprised of GPS receiving module to receive the position control data of a crane from GPS satellites, bluetooth communication module for the data communication between the ground station and the mobile station, supersonic sensor module for a precise position control of a crane, motor to replace a crane roller, embedded MCU(ATmega128L) and so on. In here, an embedded MCU controls GPS receiving module, bluetooth communication module and supersonic sensor module. The Software is comprised of three programs. Three programs are the program to filter GGA output part in a receiving data of GPS receiving module, the driving program for supersonic sensor module, the digital map program to monitor a crane location. From the simulation results, it is demonstrated that the proposed system has the capability of crane position control with 1cm precision.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.138-143
• /
• 2005

This paper aims to optimize an access probe algorithm for the CDMA 2000 system. The incremental value of PWR_STEP increases as NUM_STEP as 1dBm±0.2 for access probe of the area with good receiving sensitivity when the mobile station transmits via access channel and does not receive any ACK message. However, for the area with weak receiving sensitivity, according to the algorithm of open-loop power control, the transmitting power amplifier becomes saturated and PWR_STEP incremental value keeps performing access probe to 0dBm±0.2. Therefore interference and battery consumption increases according to the transmission of the mobile station. We have optimized the access probe algorithm according to the receiving sensitivity. We transmit the incremental value of access probe power, with delaying as much RT slot value as indicated by IS-95C standard in case of good receiving sensitivity and with delaying RT+l slot value in case of weak receiving sensitivity. Simulation results showed that the proposed algorithm contributes to decrease of the interference and battery consumption according to the transmitting power of the mobile station and improves the call duration.