• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.680-683
• /
• 2007

In dish concentrating system, natural convection heat loss occurs in cavity receiver. Heat loss mechanisms of conduction, convection, and radiation can reduce the system efficiency. To obtain the high efficiency, the receiver is to absorb the maximum of solar energy and transfer to the working fluid with maximum of heat losses. The convection heat loss is an important factor to determine the system performance. Numerical analysis of the convection heat loss of receiver was carried out for varing inclinaton angle from 0$^{\cdot}$ to 70$^{\cdot}$ with temperature range from 400$^{\cdot}C$ to 600$^{\cdot}C$ using the commercial software package, Fluent 6.0. The result of numerical analysis was comparable with convection heat loss model of solar receiver.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1116-1132
• /
• 2010

In this paper, a new forward error correction (FEC) protocol is proposed for point-to-multipoint satellite links. Link-layer error control protocols in point-to-multipoint satellite links impose several problems such as unreliability and receiver-heterogeneity. To resolve the problem of heterogeneous error rates at different receivers, the proposed scheme exploits multiple multicast channels to which each receiver tunes. The more channels a receiver tunes to, the more powerful error correcting capability it achieves. Based on its own channel condition, each receiver tunes to as many channels as it needs, which prevents from receiving unwanted parities. Furthermore, each receiver saves the decoding time, processing overhead, and processing energy. Performance evaluation shows that the proposed scheme guarantees the target PER while saving energy. The proposed technique is highly adaptive to the channel variation with respect to the throughput efficiency, and provides scalable PER and throughput efficiency.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.623-627
• /
• 2016

A power-adjustable fully-integrated CMOS optical receiver with multi-rate clock-and-data recovery circuit is presented in standard 65-nm CMOS technology. With supply voltage scaling, key features of the optical receiver such as bandwidth, power efficiency, and optical sensitivity can be automatically optimized according to the bit rates. The prototype receiver has −23.7 dBm to −15.4 dBm of optical sensitivity for 10⁻⁹ bit error rate with constant conversion gain around all target bit rates from 1.62Gbps to 8.1 Gbps. Power efficiency is less than 9.3 pJ/bit over all operating ranges.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.12
• /
• pp.873-875
• /
• 2014

In this paper we describe an asynchronous MAC protocol with receiver-initiated duty cycling for energy-efficiency in wireless sensor networks(WSN). Legacy asynchronous MAC protocols, X-MAC and PW-MAC, has weaknesses which generates too many control packets and has data collision problem between multiple transmitters, respectively. Therefore, we propose a receiver-initiated asynchronous MAC protocol which generates control packets from transmitter to complement these disadvantages. Compared to the prior asynchronous duty cycling approaches of X-MAC and PW-MAC, the proposed protocol shows a improvement in energy-efficiency, throughput and latency from simulation results.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.49-54
• /
• 2009

This study focus on verification of the thermal efficiency of volumetric receiver with $5kW_{th}$ Dish-type solar thermal system. Spiral flow path shaped on receiver and working fluid(steam) flow along the this flow path. Porous material for radiation-thermal conversion used in former researches are substituted with the stainless steel wall installed along the spiral shaped flow path. Numerical analysis for the flow path and temperature distributions are carried out. Numerical results are compared with experimental data. Using the numerical model, the heat transfer characteristics of spiral type receiver for dish-type solar thermal systems are known and the thermal performance of the receiver can be estimated.

• Publications of The Korean Astronomical Society
• /
• v.22 no.3
• /
• pp.83-87
• /
• 2007

We designed the Intermediate Frequency(IF) distributor for multi beam backend system and manufactured Voltage to Frequency Converter(VFC) to measure the multi-beam receiver performance. Multi beam receiver has 15 channel receivers and can get 15 spectrums at once. The multi beam receiver has more observation efficiency than single beam receiver. We manufactured the 15 IF distributors to distribute IF signal for Autocorrelation spectrometer that is radio signal processor. Also, we manufactured the VF Converter to test the performance measurement of receiver for Korea VLBI Network(KVN) system which is under-construct in Seoul, Ulsan and Jeju. As a result of performance measurement, we could obtain linearity of 99.4% on the input power vs output frequency and measured the operating range of input frequency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2922-2945
• /
• 2018

Achieving efficient authentication is a crucial issue for stream data commonly seen in content delivery, peer-to-peer, and multicast/broadcast networks. Stream authentication mechanisms need to be operated efficiently at both sender-side and receiver-side at the same time because of the properties of stream data such as real-time and delay-sensitivity. Until now, many stream authentication mechanisms have been proposed, but they are not efficient enough to be used in stream applications where the efficiency for sender and receiver sides are required simultaneously since most of them could achieve one of either sender-side and receiver-side efficiency. In this paper, we propose an efficient stream authentication mechanism, so called TIM, by integrating Trapdoor Hash Function and Merkle Hash Tree. Our construction can support efficient streaming data processing at both sender-side and receiver-side at the same time differently from previously proposed other schemes. Through theoretical and experimental analysis, we show that TIM can provide enhanced performance at both sender and receiver sides compared with existing mechanisms. Furthermore, TIM provides an important feature for streaming authentication, the resilience against transmission loss, since each data block can be verified with authentication information contained in itself.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.44.2-44.2
• /
• 2018

We conducted efficiency calculation in a prototype receiver optics for ASTE 10 meter telescope using the measured beam patterns of the band7+8 feed horn. Beam measurements results are summarized and estimated aperture efficiencies over band7+8 frequency range are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1423-1430
• /
• 2016

The MAC protocols, which are classified into synchronous and asynchronous MAC protocol in the wireless sensor network, have actively studied. Especially, the asynchronous MAC protocol needs to research on the algorithm synchronizing between nodes, since each node independently operates in its own duty cycle. Typically, Receiver-Initiated MAC protocol is the algorithm synchronizing particular nodes by using beacon immediately transmitted by each node when it wakes up. However, the sender consumes unnecessary energy because it blankly waits until receiving the receiver's beacon, even if it does not know when the receiver's beacon is transmitted. In this paper, we propose the MAC protocol which can improve the performance by selecting an optimal node between a sender and a receiver to overcome the disadvantages. The simulation results show that the proposed algorithm improves energy efficiency and decreases average delay time than the conventional algorithm.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.115-120
• /
• 2005

A c-band microwave radiometer receiver for river mouth water temperature remote sensing was designed and implemented The developed receiver operated at 5.1GHz frequency with 70MHz bandwidth. It had high gain of 50dB and low noise figure of 2dB. Also we executed efficiency evaluation about detection capability of the receiver with noise source similar input signal. The experiment results showed that the c-band receiver successfully detected the antenna temperature range from 193K to 300K.