• International Journal of Contents
• /
• v.10 no.4
• /
• pp.69-74
• /
• 2014

General location aware systems are only applied to indoor and outdoor environments using more than three transmitters to estimate a fixed object location. Those kinds of systems have environmental restrictions that require an already established infrastructure. To solve this problem, an Object Location Estimation (OLE) algorithm based on PTP (Point To Point) communication has been proposed. However, the problem with this method is that deduction of performance parameters is not enough and location estimation is very difficult because of unknown restriction conditions. From experimental tests in this research, we determined that the performance parameters for restriction conditions are a maximum transmission distance of CSS communication and an optimum moving distance interval between personal locations. In this paper, a system applied OLE algorithm based on PTP communication is implemented using a CSS (Chirp Spread Spectrum) communication module. A maximum transmission distance for CSS communication and an optimum moving distance interval between personal locations are then deducted and studied to estimate a fixed object location for generalization.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.341-346
• /
• 2017

In this paper, we present a 60 GHz on-off keying (OOK) modulator in a 90 nm CMOS. The modulator employs a current-reuse technique and a switching modulation for low DC power dissipation, high on/off isolation, and high data rate. The measured gain of the modulator, on/off isolation, and output 1-dB compression point is 9.1 dB, 24.3 dB, and 5.1 dBm, respectively, at 60 GHz. The modulator consumes power consumption of 18 mW, and is capable of handling data rates of 8 Gb/s at bit error rate of less than $10^{-6}$ for $231^{-1}$ PRBS over a distance of 10-cm with an OOK receiver module.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1E
• /
• pp.18-24
• /
• 2002

This paper discusses the development of an acoustic vector channel simulator for the performance analysis of an acoustic digital communication system. The channel simulator consists of transmission module, acoustic channel model, receiver, beamformer, and adaptive equalizer. The source signal (QPSK) is generated by the specified parameters. The transmitted signal generates multipath signals which have a different delay, amplitude and doppler frequency. The paper presents in details the approach to the performance analysis of an acoustic digital communication system according to the antenna structure and the various baseband signal processing techniques.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.83-86
• /
• 2003

This paper is the research and development including the system design and the prototype system building of the wide-band digital autocorrelation spectrometer system for radio astronomy observation, which will be used as back-end signal processing unit of the Dual channel SIS receiver at Taeduk Radio Astronomy Observatory. So in this paper. we performed development of the high speed digitizing sampler, the circular memory buffer, and the correlator module for the 400MHz wide-band digital autocorrelator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.142-147
• /
• 2008

Abdominal circumference changes due to breathing by the respiratory muscle activity such as diaphragm, which would partially represent the lung volume variation. The present study introduced conductive rubber molded in a cord shape incorporated with a patient's pants. The conductive rubber cord operated as a displacement transducer to measure the lung or abdominal volume changes. Signal extraction circuitry was developed to obtain the volume and its derivative(or the flow) signals followed by wireless transmission based on the Zigbee communication protocol in a size of $65mm{\times}105mm$ easily put in pocket. Breathing frequency was accurately evaluated and breath pattern analysis seemed feasible, since respiratory behaviours such as maximal inspiration and cough were well identified. Remote wireless receiver module also enabled to monitor both volume and flow signals during resting breathing on a PC terminal.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1139-1146
• /
• 2014

Digital signal processor (DSP) and field programmable gate array (FPGA) based concentrated control systems are designed for implementing CPS-SPWM strategies. The self-defined universal asynchronous receiver/transmitter (UART) protocol is used for communication between a master controller and an individual module controller via high speed links. Aimed at undesired pulse competition, this paper analyzes its generation mechanism and presents a new method for eliminating competition pulses with no time delay. Finally, the proposed concentrated controller is applied to a 10kV/10MVar distribution static synchronous compensator (DSTATCOM) industrial prototype. Experimental results show the accuracy and reliability of the concentrated controller, and verify the superiority of the proposed elimination method for competition pulses.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.369-372
• /
• 2004

In this paper, a low noise amplifier (LNA) in receiver of Low Noise Block Down Converter (LNB) for direct broadcasting service (DBS) is implemented by using GaAs HEMT The LNA is designed for operation between 10.7GHz-12.7GHz. The LNA consists of input, output matching circuits, DC-blocks and RF-chokes. The result of simulation of the LNA shows that a noise figure is less than 1.4dB and a gain is gloater than 9.2dB in the bandwidth of 10.7 to 12.7GHz with good flatness of 0. ldB

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.41-49
• /
• 2007

In this paper, we proposed a new ultrasonic distance measurement system with high accuracy and long range. To improve accuracy and enlarge range, the time of flight of ultrasonic is calculated by the period detecting method. In the proposed ultrasonic distance measurement system, the ultrasonic transmitter and receiver are separated but synchronized by RF(Radio frequency) module. The experiment has been implemented from short distance 1m to maximum available distance 30m. And the period detecting method is compared with the conventional threshold level method. Experimental results show the accuracy and range of the distance measurement are improved by this period detecting method.

• Proceedings of the Optical Society of Korea Conference
• /
• 1998.08a
• /
• pp.184-185
• /
• 1998

본 논문은 광/전 변환 소자로서, 단일 모드 광섬유로부터 입력되는 1.3$\mu$m 파장의 광신호를 ECL(Emitter Coupled Logic) 레벌의 전기 신호로 입력된 데이터를 출력 시키는 광수신 모듈에 관한 것으로, 초고속정보통신망 구축을 위한 ATM system, B-NT(Briadband Network Terination) system, 10G 전송 system 등에 직접 사용할수 있는 Clock Recevery 없는 155Mbps 광수신 모듈을 소개한다. 또한 광모듈 원가의 대부분을 차지 하고 있는 광패키징 가격 하락을 위하여 Si기판을 이용한 수동 광정렬 방식의 패키징 방법 을 사용하여 소형화, 저렴한 가격, 그리고 소요공정 시간을 단축하였다[1]. 모듈의 신뢰도를 위하여 신뢰성 시험[2] 및 system 시험을 하였으며 BERT(Bit Error Rate Tester)로 측정한 광수신의 평균 수신감도는 -36dB이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.6
• /
• pp.572-579
• /
• 1992

In this thesis, feedback circuit and FM detector applied to superheterodyne receiver to extract audio signal without random noise Is implemented. The feedback loop circuit converts 45MHz received signal to 4SiKHz If signal containing mess-age without random noise. Also the feedback loop provides the End local frequency, so narrowband BPF which is containing maximum Doppler frequency without message Is needed. Finally, quadrature FM detector extract audio signal by synthesis o350" shifted signal and ampli-tude limited signal. RSSI characteristics is measured and audio characteristics Is compared with existing If module.