• 한국항공우주학회지
• /
• 제50권9호
• /
• pp.657-662
• /
• 2022

본 논문에서는 나로우주센터에서 운용 중인 원격자료수신장비의 G/T에 대한 시뮬레이션 활용 계산 결과와 측정 방법 2개에 대하여 분석하였다. 안테나 이득과 잡음 온도는 ICARA와 Antenna Noise Temperature Calculator를 이용하여 계산하였다. 시스템 G/T는 안테나 이득/잡음돈도와 LNA 이득/잡음온도, 케이블 손실을 반영하여 산출하였다. 첫 번째 G/T 측정 방법은 Y팩터 측정법으로 LNA 입력단에 안테나와 50ohm 터미네이션을 각각 연결했을 때의 신호 레벨 차이값을 LNA 열잡음 온도와 비교하여 G/T를 산출하는 방법이다. 두 번째 방법은 태양과 최저 레벨 지점을 바라보았을 때의 잡음 레벨 값 차이를 비교하여 G/T를 구하는 Solar Calibration 측정법이다. 마지막으로 G/T 계산결과와 두 측정법 비교를 통해 정확성을 검토하고 이로부터 안테나 성능, 운용환경에 따른 최적 측정법을 제시하였다.

• 한국정보통신학회논문지
• /
• 제23권5호
• /
• pp.568-573
• /
• 2019

최신의 레이더는 동시에 다양한 다수의 표적을 탐색하고, 추적하며, 외부 재밍신호를 회피할 수 있는 다기능레이더 형태로 발전하고 있다. 이러한 다기능레이더 요구사항을 만족시키기 위해서 레이더 안테나는 실시간 빔조향 뿐만 아니라 동시에 다중 빔을 형성하고, 특정 방향에 대해 수신빔 제거 등 디지털 빔 형성이 가능한 능동위상배열 안테나 형태로 구현된다. 본 논문에서는 디지털 빔 형성이 가능한 부배열 타입 배열안테나의 하드웨어 구현방안에 대해 기술하였다. 또한 배열수신빔 형성시 부엽 준위를 낮추기 위한 안테나 개구면 진폭 가중치 적용방법에 따른 부배열 수신기 설계 방법을 제시하고, 진폭 가중치 적용방법에 따른 G/T 성능을 비교하였다. 또한 설계된 부배열 마다 부배열 수신기 동적 영역에 대해 분석하고, 디지털 빔형성기의 정렬 및 보정에 더 유리한 하드웨어 구현 방안을 제시하였다.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제25권4호
• /
• pp.312-320
• /
• 2022

Purpose: Screening serologic tests are important tools for the diagnosis of celiac disease (CD). Immunoglobulin (Ig)G anti-deamidated gliadin peptide (anti-DGP) is a relatively new autoantibody thought to have good diagnostic accuracy, comparable to that of anti-tissue transglutaminase (anti-tTG) antibody. Methods: Pediatric patients (n=86) with a clinical suspicion of CD were included. Duodenal biopsy, anti-tTG, and IgG anti-DGP antibody tests were performed. The patients were divided into CD and control groups based on the pathological evaluation of duodenal biopsies. The diagnostic accuracy of serological tests was determined. Results: IgA anti-tTG and IgG anti-DGP antibodies were positive in 86.3% and 95.4% of patients, respectively. The sensitivity, specificity, and diagnostic accuracy of the IgA anti-tTG test were 86.3%, 50.0%, and 68.6%, respectively, and those of the IgG anti-DGP test were 95.4%, 85.7%, and 90.7%, respectively. The area under the receiver operating characteristic (ROC) curve was 0.84 (95% confidence interval [CI], 0.74-0.91) for IgA anti-tTG test and 0.93 (95% CI, 0.86-0.97) for IgG anti-DGP test. The comparison of IgA anti-tTG and IgG anti-DGP ROC curves showed a higher sensitivity and specificity of the IgG anti-DGP test. Conclusion: IgG anti-DGP is a reliable serological test for CD diagnosis in children. High tTG and DGP titers in the serum are suggestive of severe duodenal atrophy. The combined use of IgA anti-tTG and IgG anti-DGP tests for the initial screening of CD can improve diagnostic sensitivity.

• ETRI Journal
• /
• 제28권1호
• /
• pp.9-16
• /
• 2006

In this paper, we analyzed and measured the electrical crosstalk characteristics of a 1.25 Gbps triplexer module for Ethernet passive optical networks to realize fiber-tothe-home services. Electrical crosstalk characteristic of the 1.25 Gbps optical triplexer module on a resistive silicon substrate should be more serious than on a dielectric substrate. Consequently, using the finite element method, we analyze the electrical crosstalk phenomena and propose a silicon substrate structure with a dummy ground line that is the simplest low-crosstalk layout configuration in the 1.25 Gbps optical triplexer module. The triplexer module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and an analog photodetector as a cable television signal receiver. According to IEEE 802.3ah and ITU-T G.983.3, the digital receiver and analog receiver sensitivities have to meet -24 dBm at $BER=10^{-12}$ and -7.7 dBm at 44 dB SNR. The electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the dummy line with $100\;{\mu}m$ space from the signal lines and 4 mm separations among the devices satisfies the electrical crosstalk level compared to a simple structure. This proposed structure can be easily implemented with design convenience and greatly reduce the silicon substrate size by about 50 %.

• 태양에너지
• /
• 제20권1호
• /
• pp.73-80
• /
• 2000

Considering the optical performance of the reflector and analyzing heat losses from the receiver, the optimal diameter of the absorber for a PTC(Parabolic Trough Concentrator) system was numerically determined. The results of this study were compared with the results of the IST (Industrial Solar Technology)-PTC test to verify the validity of the model. Good agreement was obtained with the deviation range from 0.4 to 7.7%. Generally, the net energy gained by the receiver shows the maximum at the particular absorber diameter and the specific gap size between the absorber and the glass envelop because the heat losses from the receiver becomes the minimum. The results showed that the conductive and convective heat losses became the minimum when the gap size was 7 to 10mm. Finally, it was known that the optimal absorber diameter was 62mm at $100^{\circ}C$, 57mm at $150^{\circ}C$, and 53mm at $200^{\circ}C$ of the absorber surface temperature, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.662-667
• /
• 2007

The thermal performance comparisons of the dish solar collector system are numerically investigated with mirror arrays and receiver shapes. In order to compare the performances of the dish solar collector systems, six different mirror arrays and four different receiver shapes are considered and the radiative heat flux distribution on the inside of the receiver is analyzed. A parabolic-shaped perfect mirror of which diameter is 1.5 m is considered as a reference of the mirror arrays. Five different mirror arrays of twelve identical parabolic -shaped mirror facets of which diameter are 0.4 m are proposed in this study. Their reflecting areas, which are 1.5 $m^2$, are the same. Four different receiver shapes are a dome, a conical, a cylindrical and a unicorn type. The solar irradiation reflected by mirrors is traced using the Monte-Carlo method. In addition, the radiative properties of the mirror surface can vary the thermal performance of the dish solar collector system so that the effects of the surface reflectivity and the surface absorptivity are considered. Based on the calculation, the design information of dish solar collector system for producing the electric power can be obtained. The results show that the dome type has the best performance in receiver shapes and the 2AND4INLINE has the best performance in mirror arrays except the perfect mirror.

• 정보학연구
• /
• 제4권4호
• /
• pp.25-35
• /
• 2001

본 논문은 문서상에 서명을 직접 합성하는 문서화상에 대한 디지털 서명 구조를 제안한다. 서명에 소요되는 시간은 서명의 확산에 의해 감축된다. 본 구조에 의해 디지털 서명의 제 3 조건인 발신 부인 봉쇄가 실현된다. 발신자가 비밀리에 서명을 합성하여 전송하면 수신자는 서명과 문서상의 오류를 확인 할 수 있다. 본 구조는 ITU-T.4 규격과 호환한다.

• International journal of advanced smart convergence
• /
• 제10권2호
• /
• pp.1-9
• /
• 2021

In the Internet-of-Things (IoT) and artificial intelligence (AI), complete implementations are dependent largely on the speed of the fifth generation (5G) networks. However, successive interference cancellation (SIC) in non-orthogonal multiple access (NOMA) of the 5G mobile networks can be still decoding latency and receiver complexity in the conventional SIC NOMA scheme. Thus, in order to reduce latency and complexity of inherent SIC in conventional SIC NOMA schemes, we propose a rate-lossless non-SIC NOMA scheme. First, we derive the closed-form expression for the achievable data rate of the asymmetric 2PAM non-SIC NOMA, i.e., without SIC. Second, the exact achievable power allocation interval of this rate-lossless non-SIC NOMA scheme is also derived. Then it is shown that over the derived achievable power allocation interval of user-fairness, rate-lossless non-SIC NOMA can be implemented. As a result, the asymmetric 2PAM could be a promising modulation scheme for rate-lossless non-SIC NOMA of 5G networks, under user-fairness.

• 한국환경생태학회지
• /
• 제24권4호
• /
• pp.487-492
• /
• 2010

본 연구는 집박쥐의 비번식기 행동권을 분석하기 위하여 경상북도 경주시의 집박쥐 주간 휴식장소를 대상으로 수행하였다. 박쥐의 포획은 새끼의 출산이 이루어지기 이전인 2009년 5월 4, 10, 18일에 하였으며, 암, 수 각각 3개체씩 총 6개체를 이용하였다. 행동권 분석을 위한 원격무선추적은 발신기(LTM Single Stage Radio Transmitter, 0.38g), 수신기(R2000 ATS receiver, Advanced Telemetry Systems, Inc., Isanti, MN), Yagi 안테나(Three element Yagi antenna) 및 차량용 안테나(Roof mounted antenna)를 이용하였으며, 분석에는 ArcGIS 3.3 (ESRI Inc.) Animal Movement Extension 2.0을 이용하였다. 집박쥐의 행동권 분석결과 평균 행동권은 $14.46{\pm}3.44ha$로 조사되었으며, 암컷은 $16.83{\pm}1.96ha$ 그리고 수컷은 $12.08{\pm}2.96ha$의 행동권을 가지는 것으로 나타났다. 본 연구에서는 암컷과 수컷의 행동권에서 평균적으로 암컷이 더 큰 행동권을 보이는 결과를 나타내었으나, 통계적으로 유의적인 차이는 확인되지 않았다(t=2.32, p>0.05). 또한 각각의 위치정보를 기준으로 주간 휴식지에서의 최대 이동 거리는 평균 $468.73{\pm}94.38m$ 로 나타났으며, 암컷($422.73{\pm}10.38m$)과 수컷($514.74{\pm}125.74m$)간의 유의적인 차이는 나타나지 않았다(t=-1.26, p>0.05).

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.347-352
• /
• 2006

Narrowband interference can severely degrade the performance of GPS receivers. Detecting the presence of interference and then characterizing it can lead to its removal. Receivers can be reconfigured to focus on other signals or satellites that are less vulnerable to that interference at that moment. Using hardware reconfigurability of FPGA receivers and characterizing the effect of narrowband interference on the GNSS signal quality lead us to a new RFI mitigation technique in which the highest quality and less vulnerable signal can be chosen at each moment. In the previous work [1], the post processing capability of a software GPS receiver, has been used to detect and characterize the CW interference. This is achieved by passing the GPS signal and the interference through the correlator. Then, using the conventional definition of C/No as the squared mean of the correlator output divided by its variance, the actual C/No for each satellite is calculated. In this work, first the 'Exclusion zone' for each satellite signal has been defined and then by using some experiments the effects of different parameters like signal power, jamming power and the environmental noise power on the Exclusion zone have been analyzed. By monitoring the Doppler frequency of each satellite and using the actual C/No of each satellite using the traditional definition of C/No and actual data from a software GPS receiver, the decision to reconfigure the receiver to other signal can be made.