• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1650-1656
• /
• 2004

In this paper, a multi-adaptive filter is proposed for removing EOG and the 60 Hz power supply noise from EEG measured in the frontal lobe and the feedback output control method is implemented for biofeedback. The multi-adaptive filter has been implemented on the TMS320C6711 DSP system and the feedback output control algorithm has been realized by calculating the ratio of alpha wave on the TMS320C31 DSP system with real time performance. Through the experiment using the implemented multi-adaptive filter and feedback output controller, we demonstrate that the proposed adaptive filter effectively removes EOG and the 60 Hz power supply noise from the measured EEG in the frontal lobe and the feedback algorithm controls the level of stimulation by the ratio of the alpha wave.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.154-160
• /
• 1996

The control of diamond turning is usually achieved through a laser-interferometer feedback of slide position. The limitation of this control scheme is that the feedback signal does not account for additional dynamics of the tool post and the material removal process. If the tool post is rigid and the material removal process is relatively static, then such a non-collocated position feedback control scheme may surfice. However, as the accuracy requirement gets tighter and desired surface cnotours become more complex, the need for a direct tool-tip sensing becomes inevitable. The physical constraints of the machining process prohibit any reasonable implementation of a tool-tip motion measurement. It is proposed that the measured force normal to the face of the workpiece can be filtered through an appropriate admittance transfer function to result in the estimated dapth of cut. This can be compared to the desired depth of cut to generate the adjustment control action in additn to position feedback control. In this work, the design methodology on the admittance model-based control with a conventional controller is presented. The recursive least-squares algorithm with forgetting factor is proposed to identify the parameters and update the cutting process in real time. The normal cutting forces are measured to identify the cutting dynamics in the real diamond turning process using the precision dynamoneter. Based on the parameter estimation of cutting dynamics and the admitance model-based nanodynamic control scheme, simulation results are shown.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.60-66
• /
• 2012

This paper aims to constitute a feedback vibration control system using wireless sensor networks and experiment it on a model structure to verify its effectiveness. For the purpose, we set up a feedback vibration control system composed of a wireless input/output(I/O) sensor node based on bluetooth, a home-made shear type MR damper, a shaker which generates a constant size of sine wave, and a simple beam model structure. The vibration control experiment was performed by shaking the 1/4 point of beam with a shaker. At the moment of shaking, we controled the vibration with MR damper which was placed vertically on the center of beam. Simultaneously, by acquiring acceleration response at the 2/4 point of beam, we evaluated the effectiveness of control capability. The control command was set to send a voltage signal to MR damper when the acceleration response, acquired from the wireless I/O sensor node placed at the center of beam, was more than a certain amount. Although the realtime feedback vibration control system constituted in this paper is effective only within a limited command system, it has been proven that the system was able to effectively decrease the vibration of structure by generating a control command aimed for realtime purpose. The system also showed a possibility to be used as a structural response control system adapting a variety of semi-active control algorithm.

• Journal of KIISE:Information Networking
• /
• v.27 no.1
• /
• pp.58-67
• /
• 2000

The paper presents a representative-based feedback mechanism and rate adaptation policy for congestion control in multicast traffic for multimedia applications. In multicast congestion control, feedback implosion occurs as many receivers send feedback to a sender. We propose to use representatives to avoid the feedback implosion. In our scheme, receivers feedback packet loss information periodically and a sender adapts the sending rate based on the information collected through a hierarchy of representatives. A representative is selected in each region and roles as a filter to decrease the number of feedbacks. The simulation results show that the proposed scheme solves the feedback implosion problem and well adapts in a congested situation.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.859-862
• /
• 1995

In this paper, an adaptive nonlinear observer using new Off-line algorithm is proposed to reduce the computing time. The estimated velocity data obtained from the control scheme is more accurate than that by the normal interpolation method when the velocity to be estimated is at the low speed or the fast speed. It is also shown that the adaptive controller based on AC100/C30 is useful for implementing the real-time controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.94-104
• /
• 1996

This paper presents a new approach to the design of adaptive control system using DSPs(TMS320C31) for robotic manpulators to achieve accurate trajectory tracking by the joint angles Digital signal processors are used in implementing real time adaptive control algorithms to provide an enhanced motion control for robotic manipulators. In the proposed contorl scheme, adaptation laws are derived from the improved Lyapunov second stability analysis method based on the adaptive model reference control theory. The adaptive controller consists of an adaptive feedforward controller, feedback controller, and PID type time varying auxillary control elements. The proposed adaptive control scheme is simple in structure, fast in computation, and suitable for implementation of real-time control. Morever, this scheme does not require an accurate dynamic modeling nor values of manpipulator parameters and payload. Performance of the adaptive controller is illustated by simulation and experimental results for a SCARA robot.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.67-74
• /
• 2002

Asynchronous transfer mode (ATM) can be efficiently used to transport packet data services. The switching system will support voice and packet data services simultaneously from end to end applications. To guarantee quality of service (QoS) of the offered services, source rate to send packet data is needed to control the network overload condition. Most existing control algorithms are shown to provide the threshold-based feedback control technique. However, real-time voice calls can be dynamically connected and released during data services in the network. If the feedback control information delays, quality of the serviced voice can be degraded due to a time delay between source and destination in the high speed link, An adaptive algorithm based on the optimal least mean square error technique is presented for the predictive feedback control technique. The algorithm attempts to predict a future buffer size from weight (slope) adaptation of unknown functions, which are used for feedback control. Simulation results are presented, which show the effectiveness of the algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.610-615
• /
• 2005

Visual servoing is the fusion of results from many elemental areas including high-speed image processing, kinematics, dynamics, control theory, and real-time computing. It has much in common with research into active vision and structure from motion, but is quite different from the often described use of vision in hierarchical task-level robot control systems. We present a new approach to visual feedback control using image-based visual servoing with the stereo vision in this paper. In order to control the position and orientation of a robot with respect to an object, a new technique is proposed using a binocular stereo vision. The stereo vision enables us to calculate an exact image Jacobian not only at around a desired location but also at the other locations. The suggested technique can guide a robot manipulator to the desired location without giving such priori knowledge as the relative distance to the desired location or the model of an object even if the initial positioning error is large. This paper describes a model of stereo vision and how to generate feedback commands. The performance of the proposed visual servoing system is illustrated by the simulation and experimental results and compared with the case of conventional method for dual-arm robot made in Samsung Electronics Co., Ltd.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.1
• /
• pp.13-24
• /
• 1986

A real-time hourly operation model for the flood control of Soyanggang Dam and Hwachon Dam, which are located in the North Han River is developed. The method is based on simulation with a feedforward-feedback control. The feedforward control was mainly concerned with providing the release history from the single dams. The outflows from the single dam operation rules with forecasted inflows were used as the inputs to simulation. And then feedback control is applied to reduce the peak discharge at the junction. Also, sensitivity analysis of the operation model was provided to respect the temporal and spatial distribution of storms to the model.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.317-321
• /
• 1991

In recent years, the discrete-data and digital control systems have gained importance in all industies due in part to the advances made in microcomputers, as well as the advantages found in working with digital signals. So, the developments of the computer aided design packages to analysis, control law design and digital implementation of control systems are increasingly needed and those substantial technological improvements are now expected. In the paper, a real time control program package(RTCPP) for the implementation of digital control is developed by using C language. The digital controls for the feedfoward and feedback controllers such as PI(propotional and Integration) type, regulator and servo types can be implemented by an IBM PC compatible computer with some interface modules of A-D/D-A converter and RS-232C. The effectiveness of RTCPP is illustrated by the application controls for motor and magnetic levitation systems.