• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.4
• /
• pp.239-246
• /
• 2017

Time synchronization between distributed embedded systems in the Real Time Locating System (RTLS) based on Time Difference of Arrival (TDOA) is one of the most important factors to consider in system design. Clock jitter error between each system causes many difficulties in maintaining such a time synchronization. In this paper, we implemented a system to synchronize clocks between FPGA based distributed embedded systems using the recovery clock of CDR (clock data recovery) used in high speed serial communication to solve the clock jitter error problem. It is experimentally confirmed that the cumulative time error that occurs when the synchronization is not performed through the synchronization logic using the CDR recovery clock can be completely eliminated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.146-154
• /
• 2007

In this paper, we have presented a real-time transfer mechanism for the delay-sensitive data in WSNs (Wireless Sensor Networks). The existing methods for real-time data transfer select a path whose latency is shortest or the number of hops is least. Although the approaches of these methods are acceptable, they do not always work as efficiently as they can because they had no consideration for the link error rates. In the case of transmission failures on links, they can not guarantee the end-to-end real-time transfer due to retransmissions. Therefore, we have proposed an algorithm to select a real-time transfer path in consideration of the link error rates. Our mechanism estimates the 1-hop delay based on the link error rate between two neighboring nodes, which in turn enables the calculation of the expected end-to-end delay. A source node comes to choose a path with the shortest end-to-end delay as a real-time route, and sends data along the path chosen. We performed various experiments changing the link error rates and discovered that this proposed mechanism improves the speed of event-to-sink data transfer and reduces delay jitter. We also found that this mechanism prevents additional energy consumption and prolongs network lifetime, resulting from the elative reduction of transmission failures and retransmissions.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1329-1338
• /
• 2021

Rain radar provides high spatio-temporal radar rainfall that can be used as input data to short-term precipitation forecasting models. Korea Institute of Civil Engineering and Building Technology (KICT) has developed a flash flood forecasting system that is providing flash flood forecasting based on short-term rainfall forecasts estimated by the radar rainfall. Accuracy of the radar rainfall as well as the short-term rainfall forecasts, however, can deteriorate when radar polarimetric variables have error. In this study, we develope real-time program that can correct the error inherent in the radar polarimetric variables. First, effect according to the correction of the error was verified using 363 rainfall events on non real-time. The accuracy (1-NE) of the radar rainfall was approximately 70% and correlation coefficient was higher than 0.8 after correcting the error on non real-time. The accuracy (1-NE) using the real-time program was also approximately 70% after correcting the error.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.183-189
• /
• 2011

An alignment algorithm for strapdown inertial navigation systems is proposed, in which the psi angle error model is utilized. The proposed alignment algorithm is derived from the Psi angle error model which has been widely used in real-time navigation systems. The equation for expecting steady state alignment error is also derived. The proposed algorithm was verified through real-time experiments. Experimental results show that the proposed algorithm can be used in the inertial navigation system and GNSS/INS integrated navigation system to get an initial attitude of the vehicle.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.2
• /
• pp.97-107
• /
• 2016

Military Autonomous Underwater Vehicle (AUV) is utilized to search a mine under the sea. This paper presents design and performance verification of real-time hybrid navigation system for AUV. The navigation system uses Doppler Velocity Log (DVL) integration method to correct INS error in underwater. When the AUV is floated on the water, the accumulated error of navigation algorithm is corrected using position/velocity of GPS. The navigation algorithm is verified using 6 Degree Of Freedom (DOF) simulation, Program In the Loop Simulation (PILS). Finally, the experiments are performed in real sea environment to prove the reliability of real-time hybrid navigation algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.115-121
• /
• 1999

Advanced digital computer technology enables the computer-based controllers to replace the traditional analog controllers used in factory automations. This replacement, however, brings up the side effects caused by the quantization error and non-real-time execution of control software. This paper describes the structure of real-time simulator and controller that can be used for design and verification of real-time digital controllers. The virtual machine concept adopted by the proposed real-time simulator makes the proposed simulator be independent from the specific hardware platforms. The proposed system can also be used in the loosely coupled distributed environments connected through local area network using real-time message passing algorithm and virtual data table based on the shared memory mechanism.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2311-2318
• /
• 2005

Progress in the LCD industries has been very rapid. Therefore, their manufacturing lines require larger LCD glass-handling robots and more precise path control of the robots. In this paper, we present two practical advanced algorithms for high-precision path generation of an LCD glass-handling robot. One is high-precision path interpolation for continuous motion, which connects several single motions and is a reliable solution for a short robot cycle time. We demonstrate that the proposed algorithm can reduce path error by approximately 91% compared with existing algorithms without increasing cycle time. The second is real-time static deflection compensation, which can optimally compensate the static deflection of the handling robot without any additional sensors, measurement instruments or mechanical axes. This reduces vertical path error to approximately 60% of the existing system error. All of these algorithms have been commercialized and applied to a seventh-generation LCD glass-handling robot.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.703-707
• /
• 2000

Machine tool errors have to be characterized and predicted to improve machine tool accuracy. A real-time error compensation system has been developed based on volumetric error synthesis model which is composed of machine tool errors. This paper deals with new algorithm about verification of machine tool errors. This new algorithm uses a simplified volumetric error synthesis model. This simplified model is constructed with only main components among the error components of the machines. This main error components are analyzed by three-dimensional helical ball bar test. By substituting result of helical ball bar test fer simplified model, we could find that obtained error components are closed to real error components.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3115-3123
• /
• 1993

This paper presents a real-time correction method of the movemont errors of a translatory precision machine axis. This method is a null-balances technique in which two plane mirrors are used to generate an interferometric fringe pattern utilizing the optical principles of TwymanGreen interferometry. One mirror is fixed on a reference frame, while the other is placed on the machine axis being supported by three piezoelectric actuators. From the fringe pattern, one translatory and two rotational error components of the machine axis are simultaneously detected by using CCD camera vision and image processing techniques. These errors are then independently suppressed by activating the peizoelectric actuators by real-time feedback control while the machine axis is moving. Experimental results demonstrate that a machine axis can be controlled with movement errors less than 10 nm in vertical straightness, 0.1 arcsec in pitch, and 0.06 arcsec in roll for 50mm travel by adopting the real-time correction method.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.426-434
• /
• 2020

FMI is being researched as a standard for linking large-scale simulation of CPS. In order to guarantee the reliability of the results in large-scale simulations using FMI, event handling through time management techniques is required. This paper aims to guarantee real-time performance and accuracy in large-scale co-simulation environments such as CPS. Synchronize the wallclock time and simulation time to ensure real time. Also, to ensure the accuracy, before the simulation, the event is checked and the simulation is performed with the smallest step size while maintaining the real time until the event occurrence time. As a result, the events occurring in the co-simulation environment are processed immediately and sequentially, ensuring the real-time performance and minimizing the numerical integration error by maximizing the simulation resolution. In the experiment, the proposed method was processed immediately, and it was confirmed that the numerical integration error is reduced by about 1/5 unlike the existing time management method which does not guarantee the resolution.