• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.213-217
• /
• 2000

It is essential to establish an earthquake alert system real-time seismographic data acquisition and data transmission by dedicated communications,. Up to now approximately 60 earthquake stations are installed in Korea and being operated by KMA. KEPRI,. KINS and KIGAM and its number will be increased in time. The earthquake data recorded in half of these stations are transmitted to data center and analysed in quasi real-time. Therefore if these real-time seismographic stations be connected to each organization by dedicated lines and we will develop an algorithm which we can calculate the magnitude and epicenter within 25-30 seconds after an earthquake occurred it will be possible to develop an Earthquake Alert System giving several tens of seconds warning in advance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.7
• /
• pp.719-727
• /
• 2006

This paper proposes a new method to obtain a maximum allowable delay bound for a scheduling of networked discrete control systems and event-based scheduling method. The proposed method is formulated in terms of linear matrix inequalities and can give a much less conservative delay bound than the existing methods. A network scheduling method is presented based on the delay obtained through the proposed method, and it can adjust the sampling period to allocate same utilization to each control loop. The presented method can handle three types of data (sporadic, emergency data, periodic data and non real-time message) and guarantees real-time transmission of periodic and sporadic emergency data using modified EDF scheduling method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.728-735
• /
• 2013

In this paper, we present a method of transmitting ECG signals in real-time mobile environment to be possible to implement the ubiquitous healthcare system. Because of the excessive amount of data transmission of ECG signals, it is necessary to propose a limitation to the real-time transmission. We propose a real-time electrocardiographic monitoring system based on the proposal of unusual waveform detection algorithm which detects the R-wave distortions from the arrhythmia ECG signals having unusual waveform of about 10% on average. It is very effective in terms of time and cost for medical staffs to monitor and analyze ECG signals for a long period of time. Monitoring unusual waveform by gradually adjusting the threshold values of potential and kurtosis makes the amount of data transmitted decrease and significance level of waveform to be enhanced. The unusual waveform detection algorithm is implemented with ubiquitous environment inter-working device client. It is applicable to ubiquitous healthcare system capable of real-time monitoring the ECG signal. While ensuring the mobility, it allows for real-time continuous monitoring of ECG signals.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.43-54
• /
• 2007

The effective power consumption is the primary issue in a sensor network which consists of the sensor nodes with limited battery power. So, most of the MAC protocols in sensor networks have been designed with the consideration of energy efficiency. Generally, these protocols make use of the listen and sleep mode periodically. However, this approach inevitably causes a long transmission delay on the data forwarding path, which is mainly resulted from the sleep time of the receiver node. This paper deals with a design of DT-MAC(Data Transmission centric MAC) protocol, with minimizes the data transmission delay while it forces each node to consume its energy efficiently. Thus, a node received a packet converts its remained sleep time to the pseudo_listen time, in which the node is able to transmit a packet. With benefit of the pseudo_listen period, the data transmission delay along with the data forwarding path will be shortened as much as it possible. Therefore, DT-MAC protocol is very suitable to the various applications which require a real time sensing data such as disaster and fire alarm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.574-582
• /
• 2004

This paper shows the performance comparisons of several different rate scheduling schemes for non-real time data service over the uplink of burst switching-based direct sequencecode division multiple access (DS/CDMA) system to support the integrated voice/data service. The closed-form solution of optimal scheduling formulation, which minimizes average transmission delay when all of the active data users are transmitting simultaneously, is presented and mathematical analyses with other rate scheduling schemes, which provide efficiency criterion of transmission delay for rate scheduling schemes, are performed. Numerical results show the analyses explicitly.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.698-708
• /
• 1997

To construct distance learing servers and provide their service using the WWW(World Wide Web), it is necessary that we use a real-time processing mehtod rather than the processing after downloading method for multimedia data transmission and their processing.To fulfill such requirements, we developed a real-time processing muduloe for distance education which can process multimedia data in AVI and WAV formats in distrbuted eviroments.We in turn developede a real-time WWW server that can provide real-time services of hypertxt and motion poctures data in temsw of adding the real-time porcessing modute to the MuX framework and intergarting them with WWW. We frnally developed as distance lerming system for real-time interactive chinese character learming, bassed on the results from the pre-vious steps.

• Journal of Information Processing Systems
• /
• v.13 no.2
• /
• pp.348-359
• /
• 2017

Nowadays most vehicles are equipped with a variety of electronic devices to improve user convenience as well as its performance itself. In order to efficiently interconnect these devices with each other, Controller Area Network (CAN) is commonly used. However, the CAN requires reconfiguration of the entire network when a new device, which is capable of supporting both of transmission and reception of data, is added to the existing network. In addition, since CAN is based on the collision avoidance using address priority, it is difficult that a new node is assigned high priority and eventually it results in transmission delay of the entire network. Therefore, in this paper we propose a new system component, called CAN coordinator, and design a new CAN framework capable of supporting plug and play functionality. Through experiments, we also prove that the proposed framework can improve real-time ability based on plug and play functionality.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.437-439
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission cable system Estimation of fault location is performed using data sampled at two ends of underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This travel time information is provided by the wavelet. Simulation was performed using EMTP. ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault to location in real underground transmission line.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.12
• /
• pp.608-613
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission power cable system. Estimation of fault location is performed using data smapled at two ends underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This traveling time information is provided by the wavelet. Simulation was performed using EMTP, ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault location in real underground transmission line.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.259-266
• /
• 2013

Since the wireless communications have a limited transmission, the devices just around a master node can exchange data. Though Bluetooth and Zigbee support ad hoc, they are not appropriate for real-time voice communications. In this paper, we present a TDMA-based relay protocol for several users to communicate simultaneously. The proposed protocol can relay data or voice to other nodes in real-time by the multi-hop transmission method using TDMA. And the proposed protocol improves the network performance by allocating different frequencies to the slaves depending on the routing path scheduled by the routing table. NS-2 simulation shows that the performance of the proposed protocol is good in terms of the transmission delay and pecket loss probability in the real-time voice transmission.