• The Journal of Society for e-Business Studies
• /
• v.13 no.2
• /
• pp.149-163
• /
• 2008

In a ubiquitous sensor network (USN) with several nodes, real-time data processing is one of important factors. In order to process data appropriately, all the nodes should transmit sensor data in time and the transmission between nodes and their server should be managed very systematically. For the purpose of systematic management of transmission in a USN, this paper proposes a system for analyzing transmission time of sensor data. To implement the proposed system, an analyzing process of data transmission time, an analyzing method of clock drift, a collecting method of data send/receive times, and calculating formulas of data transmission duration are proposed. According to the proposed process and methods, this paper presents a system for monitoring and analyzing data transmission duration, and it also shows the results of a sample case.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1666-1668
• /
• 2004

By wireless transmission data, there is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error check algorithm in order to decrease the data's distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error check algorithm for error check of transmission data. This study is also that investigation and search for error check algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro process in the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which can get permission to use by Frequency Law made by Korean government

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1567-1576
• /
• 2015

This paper proposes a reliable real-time data dissemination protocol for mitigating transmission failure of real-time data in WSNs. The re-transmission is well-known for recovery of transmission failure, but this may violate the real-time requirement by transmission delay. To solve this problem, the proposed protocol exploits broadcasting nature and temporal opportunity allocation. In a radio-range of sending node, there may be neighbors satisfying the real-time requirement. The neighbors of specific node could receive data simultaneously by broadcasting, and decide their priority using temporal opportunity allocation method. The method uses time slot and tolerable time. The time slot specifies the priority and transmission deadline for each neighbors, and the tolerable time is the real-time requirement at the sending node. By giving the priority to the node with shorter tolerable time in each slot, we may get more opportunities to forward toward the destination. In other words, even if a node have the longer tolerable time, it still has a chance to forward with the real-time requirement. Simulation results show that the proposed protocol is superior to the existing protocols.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.118-118
• /
• 2000

This paper suggests the methodology to guarantee the rea1-time service over Ethernet and TCP/IP and to solve the problems such as re-transmission due to collision and platform-transparency and independence. This paper proposes a new mechanism called Real-time Ethernet protocol combined the centralized medium control mechanism with the token passing mechanism. The centralized medium control mechanism is used to get the token, the right to transmit the data, and the token passing mechanism is used to return the token to the token controller and to transmit data within the specified time interval. The proposed Real-Time Ethernet Protocol is based on Java and Java RMI(Remote Method Invocation). The presented protocol is believed to work enough in real-time applications considering latency occurred due to the Java RMI, which is less small than data transmission time.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.37-44
• /
• 2009

In this paper, we propose an efficient method which improves the performance of transmission of PGA which is essential data for real-time earthquake monitoring system. Currently, above 120 earthquake stations were installed nationwide and additional installation is expected because the social interesting of earthquake hazard is rising. Real-time earthquake monitoring system checks earthquake occurrence by using PGA were calculated from acceleration data of each seismic station. An efficient method of PGA data transmission is key factor of real-time monitoring. The key idea of proposed method is to deal with each seismic station using an unique ID, to assign one bit to indicate whether a packet include a station's data or not. Proposed method can contain more station data and decrease the data loss compared to current method. To verify proposed method, we investigate the turnaround time and ratio of data loss using above 91000 packets. As results of experiment. the proposed method is proven that the method need more time about 50% but reduce the data loss about 87% as compared to previous method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1249-1252
• /
• 1996

With the expansion of research and development for the CIM and the IMS, the importance of introducing the communication network is being increased. This paper presents an implementation of robot workcell by using Fieldbus and investigates data operation of the robot workcell. Through experiments, the operations of periodic and real-time data, and non-periodic real-time data are studied. Also, the relationship between the network transmission rate and the monitoring results from the sensor is analyzed.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.4
• /
• pp.262-268
• /
• 2002

Octree representation has the advantage of being able to represent complex shapes approximately through the repetition of simple primitive shapes. Due to this reason, octree representation together with VRML(Virtual Reality Modelling Language) is usually used for approximating 3D shapes. Since the data size of octree representation increases rapidly as 3D shape to be represented is more and more complicated, its transmission time also increase. In this paper, provided is the new octree representation and encoding/decoding scheme for real-time transmission through the internet in order to visualize 3D geometric data of large size approximately.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.11
• /
• pp.644-649
• /
• 2003

This study develops an analytical model for the delay analysis of real-time data in the token-passing service of Foundation Fieldbus(FF). Using the analytical model, this study proposes a network design scheme of FF Two design criteria are introduced in this study; one is the average delay of real-time data, and the other is the maximum allowable delay of real-time data. The network design scheme determines the network parameters that satisfies the performance requirements given by these design criteria.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2213-2231
• /
• 2013

Compressed sensing is a novel technology used in the field of wireless communication and sensor networks for channel estimation, signal detection, data gathering, network monitoring, and other applications. It plays a significant role in highly secure, real-time, well organized, and cost-effective data communication in smart-grid (SG) systems, which consist of multi-tier network standards that make it challenging to synchronize in power management communication. In this paper, we present a multi-layer communication model for SG systems and propose compressed-sensing based data transmission at every layer of the SG system to improve data transmission performance. Our approach is to utilize the compressed-sensing procedure at every layer in a controlled manner. Simulation results demonstrate that the proposed monitoring devices need less transmission power than conventional systems. Additionally, secure, reliable, and real-time data transmission is possible with the compressed-sensing technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.937-941
• /
• 2016

This paper proposed an efficient multiple TCP mechanism using Android smartphones for remote control video Wi-Fi stream transmission via network communications in real time. The wireless video stream transmission mechanism can be applied in various area such as real time server stream transmissions, movable drones, disaster robotics and real time security monitoring systems. Moreover, we urgently need to transmit data in timely fashion such as medical emergency, security surveillance and disaster prevention. Our parallel TCP transmission system can play an important role in several area such as real time server stream transmissions, movable drones, disaster robotics and real time security monitoring systems as mentioned in the previous sentence. Therefore, we designed and implemented a parallel TCP transmission (parallel stream) for an efficient real time video streaming services. In conclusion, we evaluated proposed mechanism using parallel TCP transmission under various environments with performance analysis.