• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.105-113
• /
• 2015

The incidents related to transporting hazardous materials may cause serious impacts on neighborhood and surrounding areas. It is essential to have a real-time safe management system for incidents prevention of transporting hazardous materials. Currently, the system is not integrated into one channel, which makes it difficult to control an incidents response. Another problem is that event status is not appropriately shared among authorities having responsibilities taking down the incidents. This paper investigates previous studies covering the real-time safety management system for hazard material transports and suggests an integrated management system that helps communicate effectively and promptly.

• 대한안전경영과학회지
• /
• 제10권1호
• /
• pp.155-166
• /
• 2008

During last two decades the transportation system has developed into very intelligent system with GIS, GPS and ITS. The practical transportation management system provides real time response module to manage the customer's order. We have surveyed research papers on the real time vehicle routing problem in last two decades to figure out the dynamic vehicle routing problem. The papers are classified by basic routing algorithms and by managing the dynamic events which are the order management, the routing re-optimization, the routing post-optimization and the waiting strategy.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.10-14
• /
• 2015

Unsafe behavior is one of the major causes of construction accidents. Managing the behavior of workers in real-time is difficult and requires huge manpower. In this paper, a new real-time locating framework is proposed to improve safety management by collecting and analyzing data describing the behavior of workers to identify habits that may lead to accidents. The aim of the study is to identify working habits of workers based on their location history. Location data is used to compare with that of other workers and equipment. The results indicate that the reuse of real-time location data can provide extra safety information for safety management and that the proposed system has the potential to prevent struck-by accidents and caught-in between accidents by predicting unwanted interaction between workers and equipment. This adds to current research aimed at automating construction safety to the point where the continuous monitoring, managing and protection of site workers on site is possible.

• 대한안전경영과학회지
• /
• 제8권4호
• /
• pp.119-127
• /
• 2006

This paper deals with the middleware and S/W development of real time automatic attendance check management system using ubiquitous 900Mhz RFID(Radio Frequency Identification). This system supports the real time automatic attendance check and necessary data processing in class management. We expect to decrease the effort for class management and to upgrade the status of real time management of class.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.171-178
• /
• 2013

Workers are avoiding production/manufacturing sites due to the poor working environment and concern over safety. Small and medium-sized businesses introduce new equipment to secure safety in the production site or ensure effective process management by introducing the real-time monitoring technique for existing equipment. The importance of real-time monitoring of equipment and process in the production site can also be found in the ANSI/ISA-195 model. Note, however, that most production sites still use paper-based work slip as a process management technique. Data reliability may deteriorate because information on the present condition of the production site cannot be collected/analyzed properly due to manual data writing by the worker. This paper introduces the monitoring and process management technique based on a direct facility interface to secure safety in the field by improving the poor working environment and enhance there liability and real-time characteristics of the production data. Since the data is collected from equipment in real-time directly through the SIB-based interface and PLC-based interface, problems associated with workers' manual data input are expected to be solved; safety can also be improved by enhancing workers' attention to work by minimizing workers' injuries and disruption.

• 방사선산업학회지
• /
• 제18권3호
• /
• pp.209-215
• /
• 2024

Radiation work always carries the risk of radiation exposure, so regulatory agencies manage it through licensing when high exposure is expected. However, due to passive management methods using TLD, etc., there are cases where risk management is done after an incident occurs or the incident is covered up. In this study, we developed a system to manage the location of radiation work and the risk of workers in real time through a safety management platform and a location-based personal dosimeter. The safety platform server receives data from the developed personal dosimeter in real time and manages risks in three steps for each worker using location and dose rate, and can predict risks and generate alarms in real time. The personal dosimeter transmits the location and dose rate of the worker in real time using GPS and LTE communication. The developed safety management platform and personal dosimeter were verified through a field test to receive real-time data of the location and dose rate data of the worker, and the risk management function according to the individual dose rate was verified.

• 대한안전경영과학회지
• /
• 제3권3호
• /
• pp.1-9
• /
• 2001

To keep an enterprise's competitiveness on the condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously In not only in production and maintenance but also in related industrial safety. As we analyze in the surveys the maintenance management of domestic enterprises and the causes of Industrial accident, there will be necessity of drawing up countermeasures for preventing industrial accidents and for ensuring expertise maintenance technologies. Based on these analyses, the safety information system, maintenance management information system, and the machinery condition diagnosis technique are studied by using of the knowledge-based system under the real-time computer-operating environment and using fuzzy linguistic variable. This computer system based knowledge-based diagnosis can easily provide not only the knowledge of expert system about deterioration phenomenon of industrial robots, but also the knowledge of relating safety and facility all the time. Therefore, it is expected to improve the efficiency of business processes in the production and safety when we use this system.

• 한국건설관리학회논문집
• /
• 제10권6호
• /
• pp.135-145
• /
• 2009

과거 건설공사의 목표는 원가절감과 공기단축을 통한 효율성 증진이었다. 이에 비하여 안전관리는 오랜 기간 동안 소홀히 되어온 것이 사실이다. 하지만 최근 건설 산업 내에서 안전관리로 패러다임 전환이 일어나고 있으며, 이에 따라 안전관리의 중요성이 부각되고 있다. 또한 건설공사가 보다 대형화, 복잡화됨에 따라 사고의 규모가 더욱 더 커지고 있어, 건설현장에서는 보다 확실한 안전관리가 요구되고 있다. 이러한 배경 하에 본 연구는 작업자 중심의 현장 안전관리 시스템을 제안하고자 한다. 시스템 요소기술로는 위치 추적 기술(RTLS-Real Time Locating System), BIM(Building Information Modeling)기반의 모니터링 시스템(BIM Based Monitoring System), 데이터 마트(Data Mart), 알람 기술(Alarm System)이 복합적으로 적용된다. 본 시스템을 통하여 현장에서는 가변적인 상황 및 작업자에 대한 관리가 가능하게 됨으로써 기존의 정적인 관리 형태에서 벗어나 보다 폭 넓은 안전관리가 가능해 질 것이다. 또한 작업자 중심의 안전관리를 통하여 보다 체계적이고, 발전된 형태의 실시간 안전관리를 하고자 한다.

• 대한안전경영과학회지
• /
• 제8권4호
• /
• pp.109-117
• /
• 2006

This paper deals with the middleware development for real time data processing using ubiquitous RFID(Radio Frequency Identification). This middleware system supports the real time data gathering, filtering, and collaborative operations within SCM. We expect to decrease the data processing cost and to upgrade the status of RTE(Real Time Enterprise) and competitive power of company.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 춘계학술대회
• /
• pp.561-571
• /
• 2012

In this study, which is the basis for industrial presses to target small and medium enterprises with production information system is designed. Production information in real time on-site digitizing and transmitting data to a standard PC is to base operations. Personnel management, safety management, production management is to increase the efficiency. Therefore, at low cost is to encourage computerization within the company. These embedded systems and wireless communication module has a database management program installed in order to raise productivity and competitiveness will improve.