• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1885-1894
• /
• 2014

There are various high-performance algorithms in the area of the existing VDSs (vehicle detection systems). However, they requires a large amount of computational time-complexity and their systems generally are very expensive and consumes high-power. This paper proposes real-time traffic information detection algorithm that can be applied to low-cost, low-power, and open development platform such as Android. This algorithm uses a vehicle's sub-shadow to set ROI(region of interest) and to count vehicles using a location of the sub-shadow and the vehicle. The proposed algorithm is able to count the vehicles per each roads and each directions separately. The experiment result show that the detection rate for going-up vehicles is 94.1% and that for going-down vehicles is 97.1%. These results are close to or surpasses 95%, the detection rate of commercial loop detectors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.108-117
• /
• 2011

Seoul metropolitan government has been operating traffic signal control system with the name of COSMOS since 2001. COSMOS uses the degrees of saturation and congestion which are calculated by installing loop detectors. At present, inductive loop detector is generally used for detecting vehicles but it is inconvenient and costly for maintenance since it is buried on the road. In addition, the estimated queue length might be influenced in case of error occurred in measuring speed, because it only uses the speed of vehicles passing by the detector. A traffic signal control algorithm which enables smooth traffic flow at intersection is proposed. The proposed algorithm assigns vehicles to the group of each lane and calculates traffic volume and congestion degree using traffic information of each group using VANETs(Vehicular Ad-hoc Networks) inter-vehicle communication. It does not demand additional devices installation such as cameras, sensors or image processing units. In this paper, the algorithm we suggest is verified for AJWT(Average Junction Waiting Time) and TQL(Total Queue Length) under single intersection model based on GLD(Green Light District) Simulator. And the result is better than Random control method and Best first control method. In case real-time control method with VANETs is generalized, this research that suggests the technology of traffic control in signalized intersections using wireless communication will be highly useful.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.526-534
• /
• 2022

In August 2014, the Ministry of Land, Infrastructure, and Transport (MOLIT) devised an innovative ITS measure in which private and public sectors share roles to maximize investment efficiency and effectiveness in collecting and offering traffic information that had been separately implemented by the state and private sector. The main details of the innovative measure include the following: For communication information, the information collected by the private sector is used, and the state concentrates on safety-related information collection, such as unexpected situations, including construction, accidents, and deteriorating weather conditions. Consequently, safety-related information is offered in real-time through smartphones and navigation, in addition to electric road signs that have limitations in providing unexpected real-time situations due to installation at specific spots. This study presented a connected traffic information priority coordination plan to improve the accuracy of traffic information offering by analyzing problems of related traffic information, including a general national highway case study to enhance the efficiency of national highway ITS implementation, according to actual public-private traffic information sharing. In addition, this study reviewed whether to operate or demolish the information collection equipment by analyzing traffic volume level and availability of related traffic information in the existing ITS operation sections and presented ITS collection equipment installation judgment standards based on the cases concerned.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.45-52
• /
• 2004

There are many cities installing ITS(Intelligent Transportation Systems) and running TMC(Trafnc Management Center) to improve mobility and safety of roadway transportation by providing roadway information to drivers. There are many devices in ITS which collect real-time traffic data. We can obtain many valuable traffic data from the devices. But it's impossible to avoid missing traffic data for many reasons such as roadway condition, adversary weather, communication shutdown and problems of the devices itself. We couldn't do any secondary process such as travel time forecasting and other transportation related research due to the missing data. If we use the traffic data to produce AADT and DHV, essential data in roadway planning and design, We might get skewed data that could make big loss. Therefore, He study have explored some imputation techniques such as heuristic methods, regression model, EM algorithm and time-series analysis for the missing traffic volume data using some evaluating indices such as MAPE, RMSE, and Inequality coefficient. We could get the best result from time-series model generating 5.0$\%$, 0.03 and 110 as MAPE, Inequality coefficient and RMSE, respectively. Other techniques produce a little different results, but the results were very encouraging.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.582-585
• /
• 2018

As traffic volume increases and road networks become more complicated, identifying for accurate traffic flow and driving smooth traffic flow are a concern of many countries. There are various analytical techniques and studies which desire to study about effective traffic flow. However, the necessary activity is finding the traffic flow pattern through data visualization including location information. In this paper aim to study a real-world urban traffic trajectory and visualize a pattern of traffic flow with a simulation tool. Our experiment is installing the sensor module in 40 taxis and our dataset is generated along 24 hours and unscheduled routes. After pre-processing data, we improved an open source traffic visualize tools to suitable for our experiment. Then we simulate our vehicle trajectory data with a dots animation over a period of time, which allows clearly view a traffic flow simulation and a understand the direction of movement of the vehicle or route pattern. In addition we further propose some novel timelines to show spatial-temporal features to improve an urban environment due to the traffic flow.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.137-148
• /
• 2005

The position information of individual vehicles on a road at every time instant can be used to analyze the microscopic behaviors of driving of each vehicle. The limited information obtained from previous imaging technology such as traffic volume and interval velocity cannot be used to explore such microscopic traffic conditions. Also, information gathering for the microscopic behaviors by manual analysis of captured video takes large amount of time and man-power. In the paper we develop the rule-based vehicle tracking technology from which the position information of individual vehicles on a road at every time instant can be automatically obtained. Also, we extract the position data of driving vehicles on a road, length of 130m for every 0.05 second, and calculate the velocity of each traced vehicles to compare with the real velocity for the verification of accuracy. In the future, this type of tracking techniques based on video analysis can be widely used to provide the practically important information of road traffic conditions and to analyze the academically important microscopic behaviors of driving patterns.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.35-47
• /
• 2001

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence. numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristic of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a methodology of motor vehicle emission calculation by using real-time traffic data was studied. A methodology for estimating emissions of CO at a test area in Seoul. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It was calculated speed-related mass of CO emission from traffic tail pipe of data from traffic system, and parameters are considered, volume, composition, average velocity, link length. And, the result was compared with that of a method of emission calculation by VKT(Vehicle Kilometer Travelled) of vehicles of category.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.121-131
• /
• 2014

PURPOSES : The goal of this study is to analyze the travel cost according to transferring from rotary to roundabout in Korea. METHODS : This study gives particular attentions to investigating the existing 48 rotaries in Korea and building the networks of before and after improvements using VISSIM, and analyzing their travel costs. RESULTS : The main results are as follows. First, from the field survey, the domestic rotaries were analyzed to need many improvements of geometric structure for the effective operation. Second, the difference of travel cost at 3-legged rotaries were evaluated to be less than other types of rotaries due to low traffic volume. Finally, the travel cost of 4-legged and multi-legged rotaries were analyzed to rapidly increase by increasing volume. CONCLUSIONS : This study analyzes the effects using both real and simulation data unlike the existing studies. Also, this study suggests the future research topics which compare and evaluate the relations between real data and simulation outputs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3946-3965
• /
• 2018

Network anomaly detection in Software Defined Networking, especially the detection of DDoS attack, has been given great attention in recent years. It is convenient to build the Traffic Matrix from a global view in SDN. However, the monitoring and management of high-volume feature-rich traffic in large networks brings significant challenges. In this paper, we propose a moving window Principal Components Analysis based anomaly detection and mitigation approach to map data onto a low-dimensional subspace and keep monitoring the network state in real-time. Once the anomaly is detected, the controller will install the defense flow table rules onto the corresponding data plane switches to mitigate the attack. Furthermore, we evaluate our approach with experiments. The Receiver Operating Characteristic curves show that our approach performs well in both detection probability and false alarm probability compared with the entropy-based approach. In addition, the mitigation effect is impressive that our approach can prevent most of the attacking traffic. At last, we evaluate the overhead of the system, including the detection delay and utilization of CPU, which is not excessive. Our anomaly detection approach is lightweight and effective.

• Convergence Security Journal
• /
• v.6 no.4
• /
• pp.67-73
• /
• 2006

The method which research a standardization from real time cyber threat is finding the suspicious indication above the attack against cyber space include internet worm, virus and hacking using analysis the event of each security system through correlation with the critical point, and draft a general standardization plan through statistical analysis of this evaluation result. It means that becomes the basis which constructs the effective cyber attack response system. Especially at the time of security accident occurrence, It overcomes the problem of existing security system through a definition of the event of security system and traffic volume and a concretize of database input method, and propose the standardization plan which is the cornerstone real time response and early warning system. a general standardization plan of this paper summarizes that put out of threat index, threat rating through adding this index and the package of early warning process, output a basis of cyber threat index calculation.