• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1289-1293
• /
• 2010

A slipring or FORJ are usually adopted in order for power supply of Geo-centrifuge and input/output data acquisition. Since using slipring causes quite a lot electrical noise, an optical communication using FORJ becomes more general for data acquisition. Such data acquisition devices, however, require frequent maintenance and replacement due to deterioration by long term usage. DICT has set up a real-time wireless date acquisition system using wireless communication technology instead of FORJ. The system enables a remote measurement at any inertial acceleration field up to 100g level and provides as same performance as FORJ. The priority of this system is to use a normal modem substituting a special FORJ.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.125-128
• /
• 1999

In this paper, we propose a QoS-sensitive admission threshold method for the transmission of the non-real tine data packet such that the quality of services for both voice and data traffics are maintained to a required level. By detecting the active voice traffic during the current time slot, the non-real-time data packets are transmitted up to an admission threshold level during the next time slot. We found out that the optimum admission threshold is four voice traffic resources lower from the maximum allowable threshold to maintain the outage probability within 1% when the connected voice users are 15.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.247-251
• /
• 2001

Nowadays, base isolation systems such as lead-rubber bearing, elastomer bearing and sliding bearing have been installed to the various structures to prevent the disaster from seismic. The performance of base isolation system have been well proved by model-scale experiments and numerical analysis. However. the seismic response data measured at real large base-isolated structures is still insufficient. This paper presents a seismic monitoring system, acquiring real-time acceleration signals up to 32 channels, displaying time history and spectrum of the signals, storing the acquired data at a PC hard disk, and replaying the saved data. Moreover, the system can be operated without any limitation for monitoring period by automatic management of stored data file. The developed system has been installed at a real base-isolated building using lead-rubber bearings and we expect its seismic response data with ground motion signal can be well licquired in case of earthquake occurrence.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1039-1041
• /
• 2003

Ocean color products derived from remote sensing satellite data are useful for monitoring the sea water quality such as the concentrations of chlorophyll, sediments and dissolved organic matter. Currently, ocean color products derived from MODIS data can be requested from NASA over the internet. However, due to the bandwidth limitation of most users in this region, and the time delay in data delivery, the products cannot be use for near-real time monitoring of sea water chlorophyll. CRISP operates a MODIS data receiving station for environmental monitoring purposes. MODIS data have been routinely received and processed to level 1B. We have adapted the higher level processing algorithms from the Institutional Algorithms provided by NASA to run in a standalone environment. The implemented algorithms include the MODIS ocean color algorithms. Seasonal chlorophyll concentration composite can be compiled for the region. By comparing the near-real time chlorophyll product with the seasonal composite, anomaly in chlorophyll concentration can be detected.

• International journal of advanced smart convergence
• /
• 제7권4호
• /
• pp.27-39
• /
• 2018

Since the global positioning system (GPS) has been included in mobile devices (e.g., for car navigation, in smartphones, and in smart watches), the impact of personal GPS log data on daily life has been unprecedented. For example, such log data have been used to solve public problems, such as mass transit traffic patterns, finding optimum travelers' routes, and determining prospective business zones. However, a real-time analysis technique for GPS log data has been unattainable due to theoretical limitations. We introduced a machine learning model in order to resolve the limitation. In this paper presents a new, three-stage real-time prediction model for a person's daily route activity. In the first stage, a machine learning-based clustering algorithm is adopted for place detection. The training data set was a personal GPS tracking history. In the second stage, prediction of a new person's transient mode is studied. In the third stage, to represent the person's activity on those daily routes, inference rules are applied.

• Tuberculosis and Respiratory Diseases
• /
• 제86권1호
• /
• pp.23-32
• /
• 2023

Everyone is aware that air and environmental pollutants are harmful to health. Among them, indoor air quality directly affects physical health, such as respiratory rather than outdoor air. However, studies that have examined the correlation between environmental and health information have been conducted with public data targeting large cohorts, and studies with real-time data analysis are insufficient. Therefore, this research explores the research with an indoor air quality monitoring (AQM) system based on developing environmental detection sensors and the internet of things to collect, monitor, and analyze environmental and health data from various data sources in real-time. It explores the usage of wearable devices for health monitoring systems. In addition, the availability of big data and artificial intelligence analysis and prediction has increased, investigating algorithmic studies for accurate prediction of hazardous environments and health impacts. Regarding health effects, techniques to prevent respiratory and related diseases were reviewed.

• 지능정보연구
• /
• 제17권1호
• /
• pp.1-16
• /
• 2011

실시간 유비쿼터스 환경은 센서로부터 얻어낸 데이터를 기반으로 상황을 인지하고 사용자에게 적절한 반응을 보이기까지 제한된 시간 내에 모든 것을 처리해야 한다. 전체적인 센서 데이터 처리는 센서로부터의 자료 확보, 상황 정보의 획득, 그리고 사용자로의 반응이라고 하는 과정을 거친다. 즉, 유비쿼터스 컴퓨팅 미들웨어는 입력된 센서 자료 및 데이터베이스 또는 지식베이스로부터 일련의 자료들을 활용하여 상황을 인식하며, 그 상황에 적합한 반응을 하게 된다. 그런데 실시간 환경의 특징 상 센서데이터가 들어오면 각 가용 자원들을 검색하고 그 곳에 있는 미들웨어가 데이터를 처리 할 경우 어느 정도의 대기 시간이 필요한지를 결정해야 한다. 또한 센서 데이터 처리의 우선순위가 높을 때는 미들웨어가 현재 처리중인 데이터를 언제 처리를 중지하고 얼마나 대기시켜야 하는지도 결정해야 한다. 그러나 이러한 의사결정에 대한 연구는 아직 활발하지 않다. 따라서 본 논문에서는 유비쿼터스 미들웨어가 이미 센서 데이터를 처리하고 있고 동시에 새로운 센서 데이터를 처리해야 할 때 각 작업의 최적 대기시간을 계산하고 스케줄링하는 알고리즘을 제안한다.

• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.825-833
• /
• 2021

비행시험에서 비행체의 경우 실시간으로 빠르게 이동하므로 비행체 상태를 파악하기 위하여 사용되는 계측/측정장비들의 데이터는 비행시험통제시스템들에 필요한 형태로 처리되고 송신되는 것이 실시간으로 이루어지는 것이 중요하다. 그래서 통제컴퓨터 자료처리시스템에서 발생하는 원격측정자료 처리시간의 감소 및 처리 주기의 향상을 통하여 계측레이더/원격측정장비 연동자료 처리, 비행안전 판단시스템, 비상종료 송신시스템 등에 연동자료 및 안전판단 정보를 현재보다 빠르고 유연하게 제공하기 위해 현 운용중인 원격측정자료처리시스템의 PCM 데이터와 레이더 정보를 동시에 수신/처리할 수 있는 자료처리 소프트웨어를 탑재하여 독립 운용이 가능한 PCM 자료처리시스템 을 개발하였다. 본 논문에서는 기존 시스템을 보완하여 개발된 PCM 자료처리시스템의 전체적인 구조부터 소프트웨어 기능을 세부적으로 분류하여 중점적으로 설명하고 있다. 또한, PCM 자료처리시스템은 시스템 안정화 및 시험운영을 통하여 점차 보완해 나갈 것이다.

• International Journal of Control, Automation, and Systems
• /
• 제5권4호
• /
• pp.410-418
• /
• 2007

For the purpose of fault detection of the primary control surface, real-time estimation of the longitudinal stability and control derivatives of the DURUMI-II using the flight data is considered in this paper. The DURUM-II, a research UAV developed by KARI, is designed to have split control surfaces for the redundancy and to guarantee safety during the fault mode flight test. For fault mode analysis, the right elevator was deliberately fixed to the specified deflection condition. This study also mentions how to implement the multi-step control input efficiently, and how to switch between the normal mode and the fault mode during the flight test. As a realtime parameter estimation technique, Fourier transform regression method was used and the estimated data was compared with the results of the analytical method and the other available method. The aerodynamic derivatives estimated from the normal mode flight data and the fault mode data are compared and the possibility to detect the elevator fault by monitoring the control derivative estimated in real time by the computer onboard was discussed.

• Bulletin of the Korean Chemical Society
• /
• 제29권10호
• /
• pp.2017-2022
• /
• 2008

Of the experiments to shorten NMR measuring time by sparse sampling, non-uniform sampling (NUS) is advantageous. NUS miminizes systematic errors which arise due to the lack of samplings by randomization. In this study, I report the real-time acquisition of 3D NMR data using NUS and maximum-entropy (MaxEnt) data processing. The real-time acquisition combined with NUS can reduce NMR measuring time much more. Compared with multidimensional decomposition (MDD) method, which was originally suggested by Jaravine and Orekhov (JACS 2006, 13421-13426), MaxEnt is faster at least several times and more suitable for the realtime acquisition. The designed sampling schedule of current study makes all the spectra during acquisition have the comparable resulting resolutions by MaxEnt. Therefore, one can judge the quality of spectra easily by examining the intensities of peaks. I report two cases of 3D experiments as examples with the simulated subdataset from experimental data. In both cases, the spectra having good qualitie for data analysis could be obtained only with 3% of original data. Its corresponding NMR measuring time was 8 minutes for 3D HNCO of ubiquitin.