• Journal of the Korean Society of Safety
• /
• v.6 no.4
• /
• pp.53-57
• /
• 1991

Engineers of building construction have made efforts to produce more convinient building of good quality through the development of technology and raw materials nowadaye. This study is conducted to recognize problems of exterior tiles through experiments on quality of tiles according to sizes, and to find out and Iecommend most suitaff sizes of tiles. The sizes which are used widely in Construction field are selected as,45$\times$45mm, 57$\times$87mm, 60$\times$108mm, 60$\times$187mm, 96$\times$200mm. Ready mixed compound are used as mortar and Compressed attachment method are used.

• Journal of Environmental Health Sciences
• /
• v.47 no.3
• /
• pp.267-278
• /
• 2021

Objectives: Using atmospheric dispersion representative models (AERMOD and CALPUFF), the emissions characteristics of each model were compared and analyzed in ready-mixed concrete manufacturing facilities that generate a large amount of particulate matter (PM-10, PM-2.5). Methods: The target facilities were the ready-mixed concrete manufacturing facilities (Siheung RMC, Goyang RMC, Ganggin RMC) and modeling for each facility was performed by dividing it into construction and operation times. The predicted points for each target facility were selected as 8-12ea (Siheung RMC 10, Goyang RMC 8, and Gangjin RMC 12ea) based on an area within a two-kilometer radius of each project district. The terrain input data was SRTM-3 (January-December 2019). The meteorological input data was divided into surface weather and upper layer weather data, and weather data near the same facility as the target facility was used. The predicted results were presented as a 24-hour average concentration and an annual average concentration. Results: First, overall, CALPUFF showed a tendency to predict higher concentrations than AERMOD. Second, there was almost no difference in the concentration between the two models in non-complex terrain such as in mountainous areas, but in complex terrain, CALPUFF predicted higher concentrations than AERMOD. This is believed to be because CALPUFF better reflected topographic characteristics. Third, both CALPUFF and AERMOD predicted lower concentrations during operation (85.2-99.7%) than during construction, and annual average concentrations (76.4-99.9%) lower than those at 24 hours. Fourth, in the ready-mixed concrete manufacturing facility, PM-10 concentration (about 40 ㎍/m³) was predicted to be higher than PM-2.5 (about 24 ㎍/m³). Conclusions: In complex terrain such as mountainous areas, CALPUFF predicted higher concentrations than AERMOD, which is thought to be because CALPUFF better reflected topographic characteristics. In the future, it is recommended that CALPUFF be used in complex terrain and AERMOD be used in other areas to save modeling time. In a ready-mixed concrete facility, PM-10, which has a relatively large particle size, is generated more than PM-2.5 due to the raw materials used and manufacturing characteristics.

• Journal of Food Hygiene and Safety
• /
• v.24 no.1
• /
• pp.50-55
• /
• 2009

Ready-to-eats fresh cut-vegetables that may be consumed without further cooking or reheating can be grouped as potentially high risk foods. The foodborne disease outbreaks associated with consumption of the fresh cut-vegetables have been related with the contamination of Listeria monocytogenes. The food survey and consumption data sets for fresh cut-vegetables and also the published dose-response models for L. monocytogenes, was used to estimate the risk of L. monocytogenes for fresh cut-vegetables in Korea. Also, the simulation model and formulas with Microsoft@ Excel spreadsheet program using these data sets and chose dose-response model was developed. The mean case of listeriosis by consumption of the fresh cut-vegetables per 10 million per year was estimated as $3.23{\times}10^{-6}$. Results suggest that additional studies were needed to allow for a more realistic and accurate microbial risk assessment (MRA) in the future.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.5
• /
• pp.466-472
• /
• 2016

The objectives of the study were to analyze the various nutrient contents of ready-to-use-supplemental-food (RUSF) developed with Eastern African ethnic plants and compare them with commercially available supplemental food (CASF) for infants. RUSF was made with three African plants, including Ficus sur, Amaranthus caudatus, and Prosopis juliflorafa and locally available food ingredients in DR Congo and Ethiopia and was cooked at $180^{\circ}C$ for 20 min in a conventional oven. Macronutrients were analyzed by the AOAC method. Contents of 17 amino acids were analysed with amino acid analyzer, and vitamin $B_1%$ niacin, vitamin $B_6$, and vitamin C were analyzed with HPLC. Isomers of vitamin E were analyzed by GC-FID. The price of RUSF was 0.133 USD per 100g. Contents of macronutrients were not significantly different between developed RUSF and CASF. Results of amino acid analysis showed that most amino acid contents were similar or higher in RUSF compared with CASF. However, glutamic acid and lysine contents were less in RUSF than in CASF. Vitamin E and vitamin $B_1$ contents were more than five times higher in RUSF (22.40, 6.26 mg/100 g, respectively) than in CASF (4.00, 0.80 mg/100 g, respectively). Niacin was about three times higher while vitamin $B_6$ was almost 20 times higher in RUSF than in CASF. However, ascorbic acid was significantly lower in RUSF (3.43 mg/100 g) than in CASF (42.08 mg/100 g). Our study found that the developed localized RUSF showed higher nutrient contents in most micronutrients analyzed except for ascorbic acid. Out of 17 amino acids, glutamic acid and lysine contents in RUSF were less than in CASF. Therefore, further study is needed in order to improve these nutrients contents.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.2
• /
• pp.47-57
• /
• 2000

In this paper we consider an n-job non-preemptive and identical parallel machine scheduling problem of minimizing the sum of earliness and tardiness with different release times and due dates. In the real world this problem is more realistic than the problems that release times equal to zero or due dates are common. The problem is proved to be NP-complete. Thus a heuristic is developed to solve this problem To illustrate its suitability a proposed heuristic is compared with a genetic algorithm for a large number of randomly generated test problems. Computational results show the effectiveness and efficiency of proposed heuristic. In summary the proposed heuristic provides good solutions than genetic algorithm when the problem size is large.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1001-1004
• /
• 2008

An advanced backplane circuit technology for AMOLED using amorphous silicon TFTs with commercial level reliability, uniformity and lifetime was recently integrated into a prototype device. Differential aging of T98>100 hrs at 200 cd/m2 brightness and >10,000hrs lifetime is demonstrated. A 2.2" QVGA ($240{\times}320$) prototype has been developed and shown having the above-mentioned high performance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1102-1113
• /
• 2005

The propose of this study is to develop the optimal sizing system of ready-to-wear f3r elementary school girls using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school girls between 6 to 12 years old. The statistical method were 1) The total of 11 height groups, which size interval from one another is 6 cm that is an average height gap between each age. 2) In order to determine an approximate figure (m ${\times}$ n) to establish the appropriate sizes far each height group that fit to the combinations of bust and hip girth, which based on their means and standard deviations on the probability density curve to produce the standard normal distribution. 3) m and n were aligned by 4cm -the grading increments used for patterns making- and determined the size ranges by confirming the approximate figures of m and n. 4) The representative values were determined by an area ratio calculated by dividing the area determined from the range of bust and hip girth with the representative value. Considering the characteristics of subjects' distribution, the area ratios was used. 5) Weight was calculated by seeking a growth exponent for each age and multiplying it by the number of girls that fit to each size range. As sections that show the highest weight are more likely sought by the consumers, these sections were determined as the optimal size standards. 6) This optimal sizing system consists of sizes determined by the optimal size standards and its sizes are marked with height, bust and hip girth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.59-66
• /
• 2012

The use of MPSoC has been increasing because of a rise of use of mobile devices and complex applications. For improving the performance of MPSoC, number of processor has been increasing. Standard MPI is used for efficiently sending data in distributed memory architecture that has advantage in multi processor. Standard In this paper, we propose a scalable distributed memory system with a low cost hardware message passing interface(MPI). The proposed architecture improves transfer rate with buffered send for small size packet. Three queues, Ready Queue, Request Queue, and Reservation Queue, work as previous architecture, and two queues, Small Ready Queue and Small Request Queue, are added to send small size packet. When the critical point is set 8 bytes, the proposed architecture takes more than 2 times the performance improvement in the data that below the critical point.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.1
• /
• pp.43-57
• /
• 2007

This study was designed to identify the actual state of ready-to-eat street-foods usage in a college-town in northern part of seoul. For the empirical study, data was collected from customers who had eaten street-foods and a survey was conducted from 16 to 30, May 2006. The results showed that many respondents had irregular eating habits. More than 60% of them responded they usually skipped breakfast and the reason was no time. It was shown that they have had Frequent snacks and unbalanced diet. The results of survey are as follows ; 1. The major time for street-foods usage: p.m 3-5 (28.77%). 2. The frequency of street-foods usage: 1-2 times/week (43.85%). 3. The street-foods usage days of the week: weekday (52.79%). 4. The mean cost for the onetime purchase of street-foods usage: 1000-3000won (71.79%). 5. The monthly cost for the purchase of street-foods usage: below 50000won (81.84%). 6. The reason for street-foods usage: mainly convenience (60.61%). 7. The reason for minding street-foods : mainly insanitary (40.50)%. 8. Factors considered when choosing street-foods: tastes of the foods (65.08%). Also, it was shown that over 50% of respondents have considered the street-foods as the worth of meal replacement, and taken effective factor on eating habits for influx of new culture. It was indicated that problems of street-foods usage was the unbalanced nutrition for 81.8% of respondents and suggestions for improving the street-foods were sanitary controls for products for 63.4% of respondents.

• Korean journal of applied entomology
• /
• v.47 no.1
• /
• pp.87-93
• /
• 2008

Bacillus thuringiensis with selected high toxicities against tobacco cutworm, Spodoptera litura were isolated from domestic soils. When being observed under a phase-contrast microscope, the insecticidal crystal proteins were showed a bipyramidal crystal types. New CAB 109 isolate was identified to B. thuringiensis subsp. aizawai in the H serotype. As a results of insecticidal activities between CAB 109 isolate and 3 existing ready-made products against 3rd larva of S. litura, CAB 109 isolate showed 100% mortality with spore concentration $(1.3{\times}10^7cfu/ml)$. It was a very high insecticidal activity compared with a existing ready-made B. t. products. $LD_{50}$ values of CAB 109 isolate was $9.78{\times}10^5,\;6.87{\times}10^6\;and\;1.83{\times}10^7cfu/ml$ spore concentration against 2nd, 3rd and 4th larva of S. litura, respectively. Unlike Plutella xylostella, S. litura was slowly died after application up to 7 days. The weight of S. litura larva applied with CAB 109 isolate were 6-7 times less than controlled group. Even though it didn't die, it did not grow into next larva. The result observed with scanning electron microscope was that CAB 109 isolate of B. t. aizawai formed a typical bipyramidal crystal protein type. Otherwise, when CAB 109 isolate was examined with SDS-PAGE and with trypsin, there was no difference between CAB 109 strain and ready-made products of B. thuringiensis.