• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.564-567
• /
• 2005

In this paper, we develop RFID reader with integrated GPS functionality. Most RFID readers only read the Tag data attached on the products then send them to the local servers. However the new reader can get the location data of the products because of the integrated GPS module. One more feature is the TCP/IP port as well as commonly used serial port. We can transfer the Tag data very fast and can access direlectly by internet using web browsers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.578-581
• /
• 2007

For tracing tag locations, a trajectories should be modeled and indexed in radio frequency identification (RFID) systems. The trajectory of a tag can be represented as a line that connects two spatiotemporal locations captured when the tag enters and leaves the vicinity of a reader. If a tag enters but does not leave a reader, its trajectory is represented only as a point captured at entry. Because the information that the tag stays in the reader is missing from the trajectory represented only as a point, we should extend the region of a query to find the tag that remains in a reader. In this paper, we propose an interval data model of tag's trajectory in order to solve the problem. Trajectories of tags are represented as two kinds of intervals; dynamic intervals which are time-dependent lines and static intervals which are fixed lines. We also show that the interval data model has better performance than others with a cost model

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1278-1282
• /
• 2009

In apartment type of housing, if resident's vehicle is registered in central control office and RFID TAG is issued, identification can be recognized from the time of entrance into parking lot and intelligent parking guide system can be activated based on the residents' profile. Parking Guide System leads a vehicle to the available parking space which is closest to the entrance gate of the vehicle's owner. And when residents forget where they parked their cars, they can query to the Parking Guide and Management System and get responses about the location. For the correct operation of this system, it is necessary to find out where the residents' cars have parked in real time and which lot is available for parking of other cars. RFID is very fancy solution for this system. RFID reader gathers the ID information in RFID TAGs in parked cars and updates the DB up to date. But, when non-residents' cars are parked inside apartment, RFID reader cannot identify them nor know the exact empty/occupied status of parking spaces because they don't react to RFID reader's query. So for the exact detection of empty/occupied status, we suggest the combined use of ultrasonic sensors and RFID. We designed a tree topology with intermediate data aggregators. The depth of tree is normally more than 3 from root (central office) to leaves (individual parking lots). The depth of 2 in tree topology brings about the bottleneck in communication and maintenance. We also designed the information fields used in RFID networks and Sensor Networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.616-619
• /
• 2012

When multiple Tags transmit their IDs to the Reader, tag identification time is delayed due to collisions. Therefore, to reduce the reader's identification time, an efficient anti-collision technology is needed. In this paper, a new anti-collision method is proposed. The method estimates the number of tags and allocates proper number of slots based on the DFSA. The performance of proposed method is compared with existing methods through extensive simulations.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2006.05a
• /
• pp.43-52
• /
• 2006

정보통신 및 IT 기술의 획기적 발전으로 인해 오늘 날 우리가 접할 수 있는 정보는 그 양적 질적 측면 비약적인 성장을 거듭하고 있다. 또한 인터넷 보급의 활성화로 대부분의 사람들은 다양한 종류 및 형식으로 구성된 정보 속에서 지내고 있다. 특히 현재 웹 기반의 정보는 날이 갈수록 대량화 고수준화를 향해 내닫고 있다. 이에 반해 정보 소외계층의 한 부류로 인식되고 있는 시각장애 사용자들은 그들의 신체적 환경적 요인으로 인해 원하는 정보를 쉽게 획득하지 못하고 있다. 본 연구는 시각장애를 가진 사용자를 위한 효율적 웹 기반 교육 서비스 인터페이스 구현의 방법을 제시하는 것이 그 목적이다. 이에 현재 가장 많이 사용되고 있는 Screen Reader S/W의 기능적 고찰을 통해 시각장애를 가지고 있는 웹 사용자들에게 사용상의 편의 및 양적 및 질적 측면에서의 보다 나은 정보를 제공할 수 있는 웹 기반 교육 서비스의 인터페이스 구현 방법에 대한 연구를 실제 구현을 통한 그 만족도의 측정을 통해 알아보려 한다.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.191-192
• /
• 2007

This paper presents a 900MHz fractional-N frequency synthesizer for radio frequency identification (RFID) reader using $0.18{\mu}m$ standard CMOS process. The IC meets the EPC Class-1 Generation-2 and ISO-18000 Type-C standards. To minimize VCO pulling, the 900MHz VCO is generated by a 1.8GHz VCO followed by a frequency divider. The settling time of the synthesizer is less than $20{\mu}m$. The frequency synthesizer achieves the phase noise of -105.6dBc/Hz at 200kHz offset. The frequency synthesizer occupies an area of $1.8{\times}0.99mm^2$, and dissipates 8mA from a low supply voltage of 1.8V.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.199-202
• /
• 2002

This paper is about the implementation of Passive RFID(Radio Frequency Identification) tag system using a capacitive method, and explains the design and circuit's structure of this system. Fundamentally the capacitive RFID tag system consists of a tag reader, a passive tag and a host computer. And then this paper shows the system's prototype which analyzes a specification, and suggests the passive RFID system as a new method which manufactures a low cost tag system easily

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.439-442
• /
• 2003

In this paper, a system that implementation of Access Control System Using Biometric System. Biometrics is science which deals with verifying or recognizing using physiological or behavioral characteristic Access Control System uses Biometric system to make an access control system. Biometrics goes under the study of bio-recognition or bio-measurement. It is a technology or study that identifies individuals using one's Biometric character. Access control system is a system used to identify one's entrance and exit, personal management, and security. Access control system can be joined with Biometric system to produce easier use and more sufficient effects. Access control system using Wiegand (Data Format) signal output, can replace earlier RF Card systems and make an access control (security) system. It uses RS-232, Rs-422 or TCP/IP type communication with the computer so an embedded system can be controlled using the software.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.143-146
• /
• 2008

For tracing tag locations, a trajectories should be modeled and indexed in radio frequency identification (RFID) systems. The trajectory of a tag can be represented as a line that connects two spatiotemporal locations captured when the tag enters and leaves the vicinity of a reader. If a tag enters but does not leave a reader, its trajectory is represented only as a point captured at entry and we should extend the region of a query to find the tag that remains in a reader. In this paper, we propose an interval data model of tag's trajectory in order to solve the problem. For the interval data model. we propose a new index scheme called the IR-tree(Interval R-tree) and algorithms of insert and split for processing query efficiently. We also evaluate the performance of the proposed index scheme and compare it with the previous indexes.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.257-257
• /
• 2006