• Journal of Radiation Protection and Research
• /
• 제43권4호
• /
• pp.154-159
• /
• 2018

Background: To prevent small leakage accidents, a real-time and direct detection system for small leaks with a detection limit below that of existing systems, e.g. $0.5gpm{\cdot}hr^{-1}$, is required. In this study, a small-size beta detector, which can be installed inside the reactor containment (CT) building and detect small leaks directly, was suggested and its feasibility was evaluated using MCNPX simulation. Materials and Methods: A target nuclide was selected through analysis of radiation from radionuclides in the reactor coolant system (RCS) and the spectrum was obtained via a silicon detector simulated in MCNPX. A window was designed to reduce the background signal caused by other nuclides. The sensitivity of the detector was also estimated, and its shielding designed for installation inside the reactor CT. Results and Discussion: The beta and gamma spectrum of the silicon detector showed a negligible gamma signal but it also contained an undesired peak at 0.22 MeV due to other nuclides, not the $^{16}N$ target nuclide. Window to remove the peak was derived as 0.4 mm for beryllium. The sensitivity of silicon beta detector with a beryllium window of 1.7 mm thickness was derived as $5.172{\times}10^{-6}{\mu}Ci{\cdot}cc^{-1}$. In addition, the specification of the shielding was evaluated through simulations, and the results showed that the integrity of the silicon detector can be maintained with lead shielding of 3 cm (<15 kg). This is a very small amount compared to the specifications of the lead shielding (600 kg) required for installation of $^{16}N$ gamma detector in inside reactor CT, it was determined that beta detector would have a distinct advantage in terms of miniaturization. Conclusion: The feasibility of the beta detector was evaluated for installation inside the reactor CT to detect small leaks below $0.5gpm{\cdot}hr^{-1}$. In future, the design will be optimized on specific data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.807-809
• /
• 1998

Plant Protection Systems(PPS) are those systems that initiate safety actions to mitigate the consequences of design basis events by sending signals to Reactor Trip Switch Gear System(RTSS) and Engineered Safety Features-Component Control Systems(ESF-CCS). This paper illustrates distinctive features and improved design concepts of Korea Next Generation Reactor(KNGR) based on the experience obtained through prototyping of PPS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.69.3-69
• /
• 2002

The reliability of system is to become a important concern in developed industry. The controller based on the reliability is so important position. A reliable system is for system protection and human life by fault detection and control action against the transient condition of system. The aerospace system , nuclear reactor and chemical reactor are representative of a reliable system. This paper presents analysis of reliable system reliability, formal problem statement of optimal redundancy based on the reliability for a reliable system. And the problem is optimized by genetic algorithm. The genetic algorithms is useful algorithm in case of...

• Nuclear Engineering and Technology
• /
• 제41권4호
• /
• pp.447-454
• /
• 2009

This paper is a technical review of the research and development results of the Korea Nuclear Instrumentation and Control System (KNICS) project and Nu-Tech 2012 program. In these projects man-machine interface system architecture, two digital platforms, and several control and protection systems were developed. One platform is a Programmable Logic Controller (PLC) for a digital safety system and another platform is a Distributed Control System (DCS) for a non-safety control system. With the safety-grade platform PLC, a reactor protection system, an engineered safety feature-component control system, and reactor core protection system were developed. A power control system was developed based on the DCS. A logic alarm cause tracking system was developed as a man-machine interface for APR1400. Also, Integrated Performance Validation Facility (IPVF) was developed for the evaluation of the function and performance of developed I&C systems. The safety-grade platform PLC and the digital safety system obtained approval for the topical report from the Korean regulatory body in February of 2009. A utility and vendor company will determine the suitability of the KNICS and Nu- Tech 2012 products to apply them to the planned nuclear power plants.

• Nuclear Engineering and Technology
• /
• 제16권2호
• /
• pp.106-115
• /
• 1984

원자로 안전한계 설정의 근본목적은 핵연료 및 원자료 계통의 건전성을 보장할 수 있도록 원자로 운전조건을 제한하자는 데 있다. 원자로 보호계통은 원자로 운전변수들이 트립설정치에 도달하게 되면 원자로를 긴급정지시켜 운전조건이 안전한계를 초과하지 못하도록 한다. 따라서 이들 트립설정치의 생산을 위해서는 계산과 측정오차를 충분히 고려해 주어야 한다. 본 기술보고서에서는 웨스팅하우스 원자로 보호계통 트립설정치의 생산에 따른 기본원리와 노심 안전한계의 개발방법 및 트립설정치의 생산절차를 검토하였다. 웨스팅하우스 보호계통 트립설정치의 생산원리는 노심의 안전한계를 계산하고 측정 및 계산에 따른 불확실성을 충분히 고려하여 보수적인 트립설정치를 생산함으로써 핵연료의 용융과 DNB가 발생하지 않도록 하자는 데 있다.

• Journal of Radiation Protection and Research
• /
• 제41권4호
• /
• pp.350-353
• /
• 2016

Background: Various characteristics such as size distribution, chemical component and radio-activity have been analyzed for radioactive aerosols released from Fukushima Daiichi Nuclear Power Plant. Measured results for radioactive aerosols suggest that the potential transport medium for radioactive cesium was non-sea-salt sulfate. This result indicates that cesium isotopes would preferentially attach with sulfate compounds. In the present work the attachment behavior of fission products to aqueous solution aerosols of sodium salts has been studied using a generation system of solution aerosols and spontaneous fission source of $^{248}Cm$. Materials and Methods: Attachment ratios of fission products to the solution aerosols were compared among the aerosols generated by different solutions of sodium salt. Results and Discussion: A significant difference according as a solute of solution aerosols was found in the attachment behavior. Conclusion: The present results suggest the existence of chemical effects in the attachment behavior of fission products to solution aerosols.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.582-582
• /
• 2012

Characteristics of a fusion-driven transmutation reactor was investigated. A compact reactor concept is desirable from an economic viewpoint. For the optimal design of a reactor, a radial build of reactor components has to be determined by considering the plasma physics and engineering constraints which inter-relate various reactor components. In a transmutation reactor, design of blanket and shield play a key role in determining the size of a reactor; the blanket should produce enough tritium for tritium self-sufficiency, the transmutation rate of waste has to be maximized, and the shield should provide sufficient protection for the superconducting toroidal field (TF) coil. To determine the radial build of the blanket and the shield, not only a radiation transport analysis but also a burnup calculation were coupled with the system analysis and it allowed the self-consistent determination of the design parameters of a transmutation reactor.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.1311-1312
• /
• 2005

• 산업경영시스템학회지
• /
• 제19권38호
• /
• pp.69-76
• /
• 1996

The Special safety systems are incorporated into the plant design to limit radioactive releases to the public in the event of accident. Wolsung 2 is better builted than Wolsung 1 by 84 design changes for new approval requirements, codes & standards changes and manufacturing changes etc. This paper analysed and discussed the design change items for nuclear reactor safety system and needs development of design engineering for digital protection system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권9호
• /
• pp.504-511
• /
• 2000

The reliability of system is to become a important concern in developed industry. The controller based on the reliability is so important position. PPC(Plant Protection Controller) is for plant protection and human life by fault detection and control action against the transient condition of plant. The protection system of the nuclear reactor and chemical reactor are representative of PPC. This paper presents analysis of PPC relaibility formal problem statement of optimal redundancy based on the reliability for PPC. And the problem is optimized by genetic algorithm, The genetic algorithms is useful algorithm in case of large searching complex gradient existence local minimum. The genetic algorithms is useful algorithm is case of large searching complex gradient existence local minimum. The ability and effectiveness of the proposed optimization is demonstrated by the target reliability of one channel. PPC. using the failure rate based on the MIL-HDBK-217