• 한국표면공학회지
• /
• 제29권5호
• /
• pp.330-337
• /
• 1996

A rf reactive sputter deposition technique was adopted to deposit ferroelectric lead zirconate titanate (PZT) thin films with high rate from a ZrTi alloy target combined with PbO pellets. Deposition characterisitics including the effects of PbO are ratio were discussed. A new deposition mode called the quasi-metallic mode was observed. Perovskite PZT films were prepared at a growth temperature as low as$ 450^{\circ}C$. However, because the target structure is unstable, weproposed a mixture target consisted of Zr, Ti and PbO. Fundamental experiments were investigated using the powder target. Perovskite PZT film could be obtained at $450^{\circ}C$ with better electrical properties also.

• 한국표면공학회지
• /
• 제27권5호
• /
• pp.303-311
• /
• 1994

In this study, the factors, such as coating temperature T(K), reaction time t(sec) and mobile carbon content $C^*$ (wt%) of steels affecting, the growth rate of carbide layer were investigated in the reactive deposition and diffusion coating using the fluidized bed. From the results, the coating thickness d(cm) can be expressed by an equation. d=$C^*$$(KT)^{1/2}$, where K=K$\circ$exp(~Q/RT), KTEX>$\circ$ = 1.4$\times$$10^{-2}cm^{-2}$/sec, and Q=46Kcal/ mol. It was in a good aggrement with the experimental results, reguardless of the diffusion coating method and the carbide layer. Therefore, if the mobile carbon content of carbon steels and alloyed steels is known, the thickness under coating conditions can be predicted from the previous equation.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권1호
• /
• pp.30-35
• /
• 2002

We show that a combined technique of Cs$^{+}$ reactive ion scattering (Cs$^{+}$ RIS) and low-energy secondary ion mass spectrometry (LESIMS) provides a powerful means for probing molecular films and their surface reactions. Simple molecules, including HCI, NH$_3$, D$_2$O, and their mixtures, were deposited into a thin film of several monolayer thickness on Ru(001) at low temperature in vacuum, and the surface was characterized by Cs$^{+}$ RIS and LESIMS. On pure films, D$_2$O, HCI, and NH$_3$ existed in the corresponding molecular states. When HCI and NH$_3$ were co-deposited, ammonium ion(NH$_4$$^{+}$) was readily formed by proton transfer from HCI to NH$_3$. In the presence of water molecules, HCI ionized first to hydronium ion(H$_3$O$^{+}$), which subsequently transferred proton to NH$_3$ to form NH$_4$$^{+}$. The proton transfer, however, did not occur to a completion on ice, in contrast to the complete reaction in aqueous solutions.s solutions.

• 한국광물학회지
• /
• 제31권4호
• /
• pp.227-234
• /
• 2018

본 연구는 세라믹 압출법을 이용하여 납석기반 세라믹 반응매질을 제조하였다. 납석의 광물학적 특성은 XRD, XRF, DSC-TGA 및 제타전위분석을 실시하였으며, 납석기반의 세라믹 반응매질은 다양한 소성온도범위($500{\sim}1,300^{\circ}C$)에서 수행하였다. 소성온도가 증가할수록 반응매질의 강도는 증가하였으나, 비표면적은 감소된다. 온도변화에 따른 납석의 무게손실과 구조변화를 XRD, DSC-TGA 및 SEM 분석을 통해 확인하였으며, 엽납석은 소성온도 $1,000^{\circ}C$에서 pyrophyllite dehydroxylate로 전이되며, $1,300^{\circ}C$에서 뮬라이트와 크리스토발라이트로 상변화가 발생된다. 본 연구를 통해 납석은 투수성반응벽체 적용을 위한 반응매질로서 세라믹 지지체 역할을 수행할 수 있을 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2004년도 제27회 학술발표회 초록집
• /
• pp.203-203
• /
• 2004

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.85.3-85
• /
• 1998

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.28-28
• /
• 2001

Four kinds of neutral sodium salts with different anions, NaF, NaCl, NaBr, and NaI, were added to the dye bath to accurately understand the effect of anions on the reactive dyeing of silk with C. I. Reactive Black 5. The sodium cation lowered the negative surface potential of the silk and increased the dye-uptake on fille fabric as reported previously. However, because of the discrepancy in the anions′inhibition power from cation′s lowering the surface negative potential the amount of the dye on the silk fiber was different from each other in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$. The activation energy($E_a$) for the dyeing was in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$ but the dye-uptake on the fabric and the activation free energy(Δ$G^*$), the real energy barrier for the reaction, were in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$ because the strength of the interaction of the anions with sodium cations was the same as the order of the latter. In other words $F^-$ exerted the weakest electrostatic force on $Na^+$and competed with the dyestuff anions least of all. The decrease in Δ$S^*$may be due to the looesly bonded activated complex of dyestuff anions, sodium cations and fiber molecules at transition state. It was clarified from the Bronsted equation that sodium salts with different anions also had fille ionic strength effect and the specific salt effect on the reactive dyeing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.52-53
• /
• 2005

$Y_2O_3$ film was directly deposited on Ni-3at%W substrate using DC reactive sputtering technique. Metallic yttrium was used for DC sputtering target and water vapor was used for oxidizing the deposited metallic Yttrium atoms on the substrate. The window of the water vapor turned out to be broad. The minimum partial pressure of water vapor was determined by sufficient oxidation of the $Y_2O_3$ film, and the maximum partial pressure of water vapor was determined by the non-oxidation of the target surface. As the sputtering power was increased, The deposition rate increased without narrowing the window. The fabricated $Y_2O_3$ films showed good texture qualities and surface morphologies. The YBCO film deposited directly on the $Y_2O_3$ buffered Ni-3at%W substrate showed $T_c$, $I_c$ (77 K, self field), and $J_c$ (77 K, self field) of 89 K, 64 A/cm and 1.l $MA/cm^2$, respectively.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.287-294
• /
• 2012

Ceramic Matrix Composites (CMCs) represent a class of non-brittle refractory materials for harsh and extreme environments in aerospace and other applications. The quasi-ductility of these structural materials depends on the quality of the interface between the matrix and the fiber surface. In this study, a manufacture route is described where in contrast to most other processes no additional fiber coating is used to adjust the fiber/matrix interfaces in order to obtain damage tolerance and fracture toughness. Adapted microstructures of uncoated carbon fiber preforms were developed to permit the rapid infiltration of molten alloys and the subsequent reaction with the carbon matrix. Furthermore, any direct reaction between the melt and fibers was minimized. Using pure silicon as the reactive melt, C/SiC composites were manufactured with an aim of employing the resulting composite for friction applications. This paper describes the formation of the microstructure inside the C/C preform and resulting C/C-SiC composite, in addition to the MAX phases.

• Journal of Microbiology and Biotechnology
• /
• 제25권7호
• /
• pp.1177-1179
• /
• 2015

A new approach to obtain broadly cross-reactive antisera against important yeast pathogens by intensive hyperimmunization with polysaccharide-protein conjugates is described here. Surface mannan of Candida albicans and capsular galactoglucoxylomannan of Cryptococcus laurentii were isolated and chemically linked to human serum albumin. Antisera elicited by a 7-week vigorous immunization of rabbits with the conjugates showed effective cross-reactive growth inhibition of different representatives of Candida spp. as well as Cryptococcus spp. IgG antibodies are evidenced as the effective component of the antisera.