• Food Science of Animal Resources
• /
• v.37 no.4
• /
• pp.552-560
• /
• 2017

This study aimed to evaluate the quality characteristics of Tteokgalbi with 1% (w/w) black rice bran only (T1), or with black rice bran and one of the following four types of organic acid: ascorbic acid (T2), citric acid (T3), tartaric acid (T4), or maleic acid (T5) as a substitute for caramel colorant. Tteokgalbi with only black rice bran showed the highest (p<0.05) values of moisture content and water holding capacity (WHC), while there were no significant differences in protein content, fat content, ash content, and thiobarbituric acid reactive substance (TBARS) values in treatments and controls (p>0.05). All the treated samples with any one of the four organic acids showed lower pH than controls (p<0.05). The lightness and redness of Tteokgalbi treated with any one of the four organic acids and black rice bran were higher than those of T1. The volatile basic nitrogen (VBN) values of T4 and T5 were higher than those of the other treatments (p<0.05). With regards to sensory characteristics, T1 and T2 showed overall acceptability similar to that of the controls (p>0.05). The results reported in this study show that Tteokgalbi with black rice bran and any one of the four organic acids listed above not only improved quality characteristics in cooking loss, WHC, lipid oxidation but also could successfully replace the synthetic caramel colorant. Overall, the most satisfactory results were obtained by adding black rice bran and ascorbic acid.

• Textile Coloration and Finishing
• /
• v.19 no.2
• /
• pp.7-13
• /
• 2007

Photopolymerization of 2-hydroxyethyl methacrylate(HEMA), in the presence of ethyleneglycol dimethacrylate(EGDMA) and 1-Hydroxycyclohexyl phenyl ketone as crosslinker and photoinitiator, respectively, produced crosslinked poly-HEMA hydrogels. The hydrogels were colored by the exhaustion of vinylsul-phone-type reactive dyes. Good colorfastness to laundering was achieved when colored with C.I. Reactive Black 5. We investigated that the effect of coloration on the hydrophilicity and swelling properties of the films. More hydrophilic gel-surfaces were generated with in increase in coloration and crosslinking. Higher surface energy was observed with higher crosslinking level. The more rapid and higher water swellability of poly-HEMA gels after coloration may be resulted from a more opened gel structure by the easier hydration of the hydrophilic sulphonic acid groups of the reacted dyes in water.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1996

In discharge printing of cotton fabrics dyed with C.I. Reactive Orange 16(O-16), C.I. Reactive Blue 19(B-19) and C.I. Reactive Black 5(Bl-5), when the dyes were discharged by some chemicals, such as $K_{2}CO_{3}$, BASB, DSR, sarcosine and GSB, the single use of those chemicals made a very poor discharge, but mixing them with $K_{2}CO_{3}$ resulted to the outstanding improvement of discharge. Especially the dischargeability of $K_{2}CO_{3}$ BASB or $K_{2}CO_{3}$+DSR was very gratifying. For O―16, $K_{2}CO_{3}$+ DSR was slightly more effective than $K_{2}$CO$_{3}$+BASB, but for B―19 and Bl―5 $K_{2}CO_{3}$+BASB and $K_{2}CO_{3}$+DSR showed similar good results. In discharging of O―16 and B―19 by $K_{2}CO_{3}$+BASB or $K_{2}CO_{3}$ +DSR, the dischargeabilities of them increased as the time of 102$^{\circ}C$ steaming increased under the condition of 102$^{\circ}C$ steaming and no baking, but not under the condition of 102$^{\circ}C$ steaming and 16$0^{\circ}C$ baking. However for Bl-5, without regard to baking, the 102$^{\circ}C$ steaming of more than 15 minutes caused the discharge to be much more remarkable than that of 8 minutes did. Generally baking elevated the dischargeability, and this was sure in discharging by $K_{2}CO_{3}$+BASB or $K_{2}CO_{3}$+DSR. And it was confirmed that the structure of vinylsulfonyl reactive dyes could effect on the dischargeability because the three dyes, though little, showed different discharge behaviors.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.114-119
• /
• 2001

Four kinds of neutral sodium salts with different anions, NaF, NaCl, NaBr, and NaI, were added to the dye bath to accurately understand the effect of anions on the reactive dyeing of silk with C. I. Reactive Black 5. The sodium cation towered the negative surface potential of the silk and increased the dye-uptake on fille fabric as reported previously. However, because of the discrepancy in the anions'inhibition power from cation's lowering: the surface negative potential the amount of the dye on the silk fiber was different from each other in the order of $F^->Cl^-> Br^-I^-$. The activation energy(E$_{a}$) lot the dyeing was in the order of $F^->Cl^-> Br^-I^-$ but the dye-uptake on the fabric and the activation free energy$(\Delta{G}^*)$, the real energy barrier fort the reaction, were in the order of $F^->Cl^-> Br^-I^-$ because the strength of the interaction of the anions with sodium cations was the salute as the order of the latter. In other words F$^{[-1000]}$ exerted the weakest electrostatic force on $Na^+$ and competed with the dyestuff anions least of all. The decrease in $\Delta{S}^*$ may be due to the looesly bonded activated complex of dyestuff anions, sodium cations and fiber molecules at transition state. It was clarified from the Brёnsted equation that sodium salts with different anions also had fille ionic strength effect and the specific salt effect on the reactive dyeing.g.

• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.372-379
• /
• 2000

Four kinds of neutral salts with different cations, LiCl, NaCl, KCl, and CsCl, were added to the dye bath to accurately understand the effect of cations on the reactive dyeing of silk with C. I. Reactive Black 5. The cations of salts added lowered the negative surface potential of the silk, improving equilibrium adsorption and the accessibility of the dyestuff to the fiber greatly and speeding up the dyeing rate in the order of $Li^+>Na^+>K^+>Cs^+$. The activation energy$(E_a)$ for the dyeing was in the order of$Li^+>Na^+>K^+>Cs^+$ but the activation free energy$(\Delta{G}^*)$, or the real energy barrier for the reaction, was in the order of $Li^+>Na^+>K^+>Cs^+$ because the degree of the contribution of E$^{a}$ to the activation entropy$(\Delta{S}^*)$ was $Li^+>Na^+>K^+>Cs^+$. It was found from this result that LiCl had the strongest lowering effect on the negative surface potential of silk. The decrease in $\Delta{S}^*$ should be attributed to the loosely bonded activated complex of dyestufffs, cations and fiber molecules at transition state. It was clarified from the Bronsted equation that salts had the ionic strength effect and the specific salt effect on the reactive dyeing.

• Current Research on Agriculture and Life Sciences
• /
• v.12
• /
• pp.83-95
• /
• 1994

Fixation rate of reactive dyes on silk fibroin showed the same tendency to absorption rate. Fixation rate of Yellow 179 and Blue 71 was quite slow and Black 5, Blue 49, Blue 4, Blue 19 and Blue 21 was relatively fast. Weight increase by MAA graft polymerization onto filk fibroin was decreased, on the whole, according to the the increase of dye fixation, but weight increase of silk fibroin dyed with Blue 71 and Blue 21 was much higher than that of silk fibroin. And weight increase of silk fibroin dyed with Yellow 179 was similar to that of silk fibroin and in case of Blue 19, weight increase was about 12%, constantly. Weight increase of silk fibroin dyed with Blue 71 and Blue 21 was higher and the others were lower than of silk fibroin. And weight increase was diminished according as the dyeing temperature rises. The color was a little changed by MAA graft polymerization.

• Journal of Sensor Science and Technology
• /
• v.20 no.3
• /
• pp.207-212
• /
• 2011

In this study, pyramid structured black silicon process was developed in order to overcome disadvantages of using wet etching to texture the surface of single crystalline silicon and using grass/needle-like black silicon structure. In order to form the pyramidal black silicon structure on the silicon surface, the RIE system was modified to equip with metal-mesh on the top of head shower. The process conditions were : $SF_6/O_2$ gas flow 15/15 sccm, RF power of 200 W, pressure at 50 mTorr ~ 200 mTorr, and temperature at $5^{\circ}C$. The pressure did not affect the pyramid structure significantly. Increasing processing time increased the size of the pyramid, however, the size remained constant at 1 ${\mu}M$ ~ 2 ${\mu}M$ between 15 minutes ~ 20 minutes of processing. Pyramid structure of 1 ${\mu}M$ in size showed to have the lowest reflectivity of 7 % ~ 10 %. Also, the pyramid structure black silicon is more appropriate than the grass/needle-like black silicon when creating solar cells.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.463-467
• /
• 2003

Fundamental experiments were carried out about color removal efficiency of dyeing wastewater using a $bioreactor-TiO_2/UV$ reactor system. Color removal efficiencies of the Reactive Black 5 in the system were found to bo more than 80% in changes of dilution rate 0.04 to $0.08hr^{-1}$. In this research, a new color removal system of dying wastewater will be proposed after more investigation of decolorization efficiencies about different dyes and condition.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.476-476
• /
• 2005

• Proceedings of the Korean Society of Life Science Conference
• /
• 2007.10a
• /
• pp.108.1-108.1
• /
• 2007

See Full Text