• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.65-73
• /
• 2005

The compressible flow of reactive fluid is investigated by using the transonic small-disturbance (TSD) model and the one-step first-order Arrhenuis chemical reaction. The fluid flow is restricted to dilute premixed reactions with small heat release. The effects of channel shape and Mach number on transonic combustion are studied by numerical analysis. The results show that the channel divergence increases the chemical reaction within the given channel length whereas the channel convergence inhibits the chemical reaction near the outlet and that increasing the inlet flow Mach number at a fixed reaction rate causes the flow acceleration in a diverging channel and the appearance of weak shock waves which do not show in the inert flow case. It also helps to increase the pressure and temperature near the diverging channel outlet and to consume the reactant within the given channel length.

• Korean Journal of Veterinary Research
• /
• v.63 no.4
• /
• pp.40.1-40.7
• /
• 2023

To optimize the most efficient method for porcine in vitro maturation (IVM), we compared the effects of supplementing extracellular vesicles (EVs) derived from porcine follicular fluid (pFF). The cumulus oocyte complexes were grouped into 4 groups with different supplementations as following: pFF (G1), pFF-depleted EVs (G2), EVs (G3) and control (G4) groups. After IVM with different supplementations, maturation rates and the developmental competences of porcine oocytes and blastocyst development were investigated. Additionally, glutathione (GSH) and reactive oxygen species (ROS) levels were measured in mature oocytes. The EVs were isolated and characterized with cryo-TEM and nanoparticle tracking analysis. The pFF significantly affected the maturation rate, whereas the presence of EVs did not show notable difference in the maturation rates. Although there were numerical increases in the measured parameters in EV and pFF-depleted EVs groups, no significant differences were observed between them. The EV group showed similar oocyte maturation rate for both positive and negative control groups. The GSH was not different among the groups, but ROS levels were significantly lower in pFF-supplemented group when compared with other groups with the highest level in the control group. G2 group wasn't significantly different G1 and G3 group. G3 group wasn't significantly different from G2 and G4 group. This suggests that EVs in IVM medium which probably effected partially to protect against oxidative stress and potentially enhance the quality of oocytes. This study indicates that the EVs in pFF play a significant role in improving the efficiency of oocyte maturation in porcine.

• Journal of Animal Reproduction and Biotechnology
• /
• v.39 no.2
• /
• pp.131-137
• /
• 2024

Background: Porcine embryonic development is widely utilized in the medical industry. However, the blastocyst development rate in vitro is lower compared to in vivo. To address this issue, various supplements are employed. Extracellular vesicles (EVs) play the role of communicators that carry many bioactive cargoes. Additionally, the contents of EVs can vary on the estrous cycle. Methods: We compared the effects of adding EVs derived from porcine uterine fluid (UF), categorized as non-EV (G1), EVs in estrus (G2) and EVs in diestrus (G3). After in vitro culture (IVC) was performed in three different groups, cleavage rate and blastocyst development rate were examined. In addition, glutathione (GSH) and reactive oxygen species (ROS) levels were measured 2 days after activation to assess oxidative stress. Results: Using NTA and cryo-TEM, we confirmed the presence of EVs with sizes ranging from 30 nm to 200 nm, that the particles were suitable for analysis for analysis. In IVC data, the highest cleavage rate was observed in G2, which was significantly different from G1 but not significantly different from the next highest, G3. Similarly, the highest blastocyst development rate was observed in G2, which was significantly different from G1 but not significantly different from the next highest, G3. Conclusions: These results indicate that estrus derived EVs contain biofactors beneficial for early blastocyst development, including GSH which protects the blastocyst from oxidative stress. Additionally, although diestrus-derived EVs are expected to have some effect on blastocyst development, it appeared to be less effective than estrus-derived EVs.

• The Korean Journal of Cytopathology
• /
• v.6 no.2
• /
• pp.106-115
• /
• 1995

Reactive humsn mesothelial cells were examined by immunocytochemical stain with intermediate filaments (cytokeratin [CK1, CK7, CK8, CK18, CD19), vimentin, desmin, actin), epithelial membrane antigen, carcinoembryonic antigen (CEA), MHC class II antigen (HLA-DR), LeuM-1 (CD15), $\alpha1-antitrypsin$(ACT), $\alpha1-antichymotrypsin$ (ACHT), CD68(KP-1) and FcyRIII(CD16). The mesothelial cells were isolated from patients with liver cirrhosis and pleural effusion, and short-term cultured in RPMI 1640 media containing 10% heat inactivated fetal calf serum and 1% identical supernatant fluid of the patients' transudates. The results obtained are as follows 1. The cultured-reactive mesothelial cells were positive for the protein of cytoskeleton such as cytokeratin and vimentin, but negative for desmin and actin. The resting mesothelial cells showed positive reactions for cylokeratin, but negative for vimentin, desmin and actin. 2. The primary antibodies to the cytokeratin were strongly reactive for CK1, CK8 and CK18 but negative for CK7 and CK19 in both reactive and resting mesothelial cells. 3. Resting mesothelial cells showed negative reactions for CEA, but strong positive reactions in cultured-reactive mesothelial cells. 4. The markers for the monocytes/histiocytes(CD11b, CD14, CD16, CD68, Iysozyme and $\alpha1-antitrypsin$ and $\alpha1-antichymotrypsin$) were nonreactive in resting mesothelial cells, but lysozyme and $\alpha1-antitrypsin$ were weakly reactive in reactive and proliferative mesothelial cells. 5. MHC Class II molecule(HLA-DR antigen) was negative in both resting and reactive mesothelial cells. These results suggest that the short-term cultured, reactive mesothelial cells show a newly aberrant expression of the vimentin and calcine-embryonic antigen. The reason of the aberrant expression of the intermediate filament and oncofetal antigen in reactive and proliferative mesothelial cells should be further evaluated.

• Journal of Aerospace System Engineering
• /
• v.1 no.2
• /
• pp.37-42
• /
• 2007

This paper proposes a numerical modeling approach to simulate the hybrid combustion phenomena. From the physical understandings of hybrid combustion, the computational domain was separated into three regions: the solid fuel, gas phase reactive flow, and the interface between solid and fluid. Moreover, for the accurate calculation, computational grids for these regions was generated at every time step considering the instantaneous moving interface which are governed by the balance equations using thermal pyrolysis. In the domain of reactive flow, by virtue of diffusion flame structure, turbulent combustion modeling was introduced using either mixture fraction approach or mean reaction rate approach.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1604-1610
• /
• 2004

A steady dilute premixed combustion at transonic speeds in a diverging channel is investigated. The model explores the nonlinear interactions between the near-sonic speed of the flow, the small changes in geometry from a straight channel, and the small heat release due to the one-step first-order Arrhenius chemical reaction. The reactive flow can be described by a nonhomogeneous transonic small-disturbance (TSD) equation coupled with an ordinary differencial equation for the calculation of the reactant mass fraction in the combustible gas. The asymptotic analysis results in the similarity parameters that govern the reacting flow problem. The model is used to study transonic combustion at various amounts of incoming, reactant mass, reaction rates, and channel geometries.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.369-369
• /
• 2006

Compatibilizers contribute to many processes in polymer industry, such as manufacturing polymer blends and composites. They are usually designed to be block or graft form which is combined in polar and non-polar parts in the first synthesis process level, for example, the general form of maleic anhydride (MA) as a compatiblizer is a grafted counterpart. However, the process of making the compatibilizer is related to the first synthesis level and it has some problems, such as high cost, poor processability, limitation on use and properties, and so on. So, in order to improve its poor processability and overcome the limitation on use, we developed compatibilizers which have various chemical forms by high intensity ultrasound and super critical fluid nitrogen in polymer melt reactive extrusion.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.13 no.2
• /
• pp.73-86
• /
• 2009

The problem of thermal stability of an exothermic reactive viscous fluid between two parallel walls in the plane Poiseuille and Couette flow configurations is investigated for different thermal boundary conditions. Neglecting reactant consumption, the closed-form solutions obtained from the momentum equation was inserted into the energy equation due to dissipative effect of viscosity. The resulting energy equation was analyzed for criticality using the variational method technique. The problem is characterized by two parameters: the Nusselt number(N) and the dynamic parameter($\Lambda$). We observed that the thermal and dynamical boundary conditions of the wall have led to a significant departure from known results. The influence of the variable pre-exponential factor, due to the numerical exponent m, also give further insight into the behavior of the system and the results expressed graphically and in tabular forms.

• Applied Science and Convergence Technology
• /
• v.23 no.4
• /
• pp.169-178
• /
• 2014

Fluid model based numerical analysis is done to simulate a low damage etch back system for 20 nm scale semiconductor fabrication. Etch back should be done conformally with very high material selectivity. One possible mechanism is three steps: reactive radical generation, adsorption and thermal desorption. In this study, plasma generation and transport steps are analyzed by a commercial plasma modeling software package, CFD-ACE+. Ar + $CF_4$ ICP was used as a model and the effect of reactive gas inlet position was investigated in 2D and 3D. At 200~300 mTorr of gas pressure, separated gas inlet scheme is analyzed to work well and generated higher density of F and $F_2$ radicals in the lower chamber region while suppressing ions reach to the wafer by a double layer conducting barrier.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1174-1179
• /
• 2000

In recent years, the structural shock response to underwater explosion has been studied as much, or more, through numerical simulations than through testing for several reasons. Very high costs and sensitive environmental concerns have kept destructive underwater explosion testing to a minimum. Increase of simulation capabilities and sophisticated simulation tools has made numerical simulations more efficient analysis methods as well as more reliable testing aids. For the simulation of underwater explosions against, surface ships or submerged structures one has to include the effects of the explosive shock wave, the motion of the gaseous reactive products, the local cavitation collapse, the different nonlinear structural properties and the complex fluid-structure interaction phenomena. In this study, as benchmark step for the validation of hydrocode LS/DYNA3D and of technology of fluid-structure interaction problems, two kinds of cavitation problems are analyzed and structural shock response of floating ship model are compared with experimental result.