• Korean Journal of Microbiology
• /
• v.38 no.4
• /
• pp.235-240
• /
• 2002

Protease producing bacterium, PB16 was isolated from food processing wastewater sludge and paddy field soil samples and selected by the clear zone and enzyme activity test. The isolate was gram negative, rod type and its protease productivity was 6.49 U/ml. As a result of API20NE kit test and 16S rDNA sequencying, the isolated PB16 was identified as Aeromonas hydrophila (99%). The growth rate ($h^{-1}$) was 0.21 in synthetic waste water only and 0.26 in synthetic waste water containing vitamin and mineral using a bioscreen C. Synthetic wastewater removal rate was 59 and 87%, respectively after 1 and 3 day reaction (intial CODcr was 2,472 mg/l).

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.75-81
• /
• 2003

In this paper, the study of effects of flow variables on flame structure and NOx emission concentration was performed in co-axial laminar partially premixed methane/air flames. the objectives are to reveal its effect as parameters were varied and to understand the correlation between flame structure and NOx emission characteristics in the reaction zone. equivalence ratio(${\Phi}$), fuel split degree(${\sigma}$), and mixing distance(x/D) were defined as a premixing degree and varied within $1.36{\sim}3.17$(equivalence ratio), $50{\sim}100$(fuel split degree), and $5{\sim}20$(mixing distance). the image of $OH{\ast}$ and $CH{\ast}$, and NOx concentration were obtained with an ICCD camera and a NOx analyzer. additionally the maximum intensity location of $OH{\ast}$ chemiluminescence and $CH{\ast}$ chemiluminescence were measured to compare each flame structures. In conclusion flame structure and NOx emission characteristics were changed from diffused to premixed flame when mixing degree was on the increase. the main effect on flame structure and NOx production was at first equivalence ratio(${\Phi}$), and next fuel split degree(${\sigma}$), and finally mixing distance(x/D).

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.83-88
• /
• 2003

The concept of lean-premixed combustion in gas turbine combustor operation has become a standard in recent years as an effective means to meet stringent environmental standards on NOx emissions. Various types of air-fuel premixer, which affect greatly NOx emission and stability of lean-premixed low NOx combustor, were investigated experimentally to reduce the NOx emission. One type of the premixers is selected by experiments and applied it to 70kW class lean-premixed gas turbine combustor. The exit temperature and emissions of CO and NOx were measured with equivalence ratios at ambient pressure. From the results, the emissions of CO and NOx were influenced by the type of air-fuel premixer. As the mixing length of air and fuel is longer, the NOx and CO emission were decreased in the primary reaction zone. Compared with of conventional combustor, the lean-premixed low NOx combustor has low NOx emission characteristics.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.89-94
• /
• 2003

For the development of high efficiency and low emission combustion systems, high temperature air combustion technology has been tested by utilizing preheated air over 1100 K and exhaust gas recirculation. In this system, combustion air is diluted with large amount of exhaust gases ($N_2$, $CO_2$), such that the oxygen concentration is relatively low in the reaction zone, leading to low flame temperature. Since, the temperature fluctuations and sound emissions form the flame are small and flame luminosity is low, the combustion mode is expected to be flameless or mild combustion. Experiment was performed to investigate the turbulent flame structure and $NO_X$ emission characteristics in the high temperature air combustion focused on coflowing jet diffusion flames which has a fundamental structure of many practical combustion systems. The effect of turbulence has also been evaluated by installing perforated plate in the oxidizer inlet nozzle. LPG was used as a fuel. Results showed that even though $NO_X$ emission is sensitive to the combustion air temperature, the present high temperature air combustion system produce low $NO_X$ emission because it is operated in low oxygen concentration condition in excess of dilution.

• Korean Journal of Animal Reproduction
• /
• v.14 no.2
• /
• pp.125-131
• /
• 1990

These experiments were carried out to investigate of the molecular characteristics of porcine zona pellucidae and to examine the reactivity of anti-zona antibody by SDS-PAGE, Immunoblotting and Immunoprecipitation. The results obtained in these experiments were summarized as follows : 1. The result obtained by SDS-PAGE of porcine zona pellucidae indicated that it composed of several units with molecular weight ranging 55,000-110,000. 2. In order to see the reactivity of antibodies to zona pellucidas, immunoblotting was applied. The results indicated that polyclonal antibodies to porcine and mouse zona reacted with porcine zona. While monoclonal antibody to porcine did not react with the procine zona enough to show a clear band on a gel. 3. Labelling of porcine zonae with 125I was performed using the Iodogen method, the radioactivity and the percent incorporation of 125I into porcine zonae were approximately 26,000 cpm/10${mu}ell$ and 16, respectively. 4. Measurements of radioactivity and O.D value for Immunoprecipitates produced by reaction of 125I-porcine zona with anti-zona antisera were confirmed that existence of reactivity of monoclonal antibody to porcine zona although its reactivity was lower than that of polyclonal antibodies, and reconfirmed that cross-reactivity of polyclonal antibody of mouse zona with porcine zona.

• Journal of the Korean Society of Combustion
• /
• v.3 no.2
• /
• pp.1-11
• /
• 1998

Experimental investigation on flame spread of blended fuel droplet arrays has been conducted for droplet diameters of 1.0mm and 0.75mm using high-speed chemiluminescence images of OH radical. The flame spread rate is measured with blended fuel composition, droplet diameter, and droplet spacing. Flame spread is categorized into two: a continuous mode and an intermittent one. There exist a limit droplet spacing, above which flame does not spread, and a droplet spacing of maximum flame spread, which is closely related to flame diameter. It is seen that flame spread rate is mainly dependent upon the relative position of flame zone within a droplet spacing. In case of large droplet, the increase of % volume of Heptane induces the shift of limit droplet spacing to a larger spacing since volatile Heptane plays a role of an enhancer of flame spread rate. In case of small droplet, the increase of % volume of Heptane leads to the shift of limit droplet spacing to a smaller droplet spacing. This is so because of the delayed chemical reaction time by the rapid increase of mass flux of fuel vapor for small droplet.

• Journal of the Korean Society of Combustion
• /
• v.8 no.3
• /
• pp.38-48
• /
• 2003

OH, CH and NO radical distributions have been measured and compared with the numerical analysis results in methane/air partially premixed laminar flames using 2-D LIF technique. The pick intensity of OH LIF signal is insensitive to fuel equivalence ratio: however, CH LIF intensity decreases as equivalence ratio increases and the NO concentration increases with equivalence ratio. The contribution of the prompt NO, formed near premixed reaction zone, to the total NO formation is evident from the OH, CH, and NO PLIF images in which the dilution effect of nitrogen is minimal for the highest equivalence ratio. Measured OH and NO LIF signals in counterflow flames agree with the computed concentration distributions. Both numerical and experimental results indicate that the structural change in a flame alters the NO formation characteristics of a partially premixed counterflow flame. The nitrogen dilution also changes flame structure, temperature and OH radical distributions and results in the decreased NO concentrations in a flame. The levels of decrease in NO concentrations, however, depends on the premixedness(${\alpha}$) of a flame. The larger change in the flame structure and NO concentrations have been observed in a premixed flame(${\alpha}=1.0$), which implies that the premixedness is likely to be a factor in the dilution effect on NO formation of a flame.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.19-25
• /
• 2006

Energy efficient and low pollution combustion systems the use gaseous fuels have been in great demand in recent year. Radiant burner in many different forms are emerging as very desirable combustion systems for same reason. Porous radiant burners are used in drying, preheating and curing, and in other type of materials processing and manufacturing processes. However, little knowledge is available about the operating characteristics and the structure of flames in porous ceramic fiber radiant burners. The objective of the present work is to investigate the global performance characteristics of the ceramic fiber burner. A detailed study which includes the spectral intensity, gas temperature, radiation efficiency and global pollutant emissions. Another objective is to study the flame structure of the ceramic fiber burner by measuring the local gas temperature. The results indicate that ceramic fiber burner do offer a 19-44% gain in radiant efficiency. The ceramic fiber burner exhibit significant spectral intensity peaks in the band at $2.0-2.5{\mu}m$. The local temperature distribution inside the mat and near the mat surface as a function of the equivalence ratio can be reasonably interpreted by the relation of the heat balance in the mat and movement of the reaction zone. Nox emission from ceramic fiber burner is less than 25ppm throughout the operating range.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.265-270
• /
• 1989

The present study considers the thermal structure variation in a porous medium caused by changing the most important radiative property of porous medium, absorption coefficient, as well as altering the physical dimension of porous medium and the equivalence ratio of premixed gas mixture. The radiation model was introduced as an unsteady differential form using the two-flux gray radiation model. The role of the conductive heat transfer through both gas phase and porous medium was found to be almost insignificant compared with that of the radiative heat transfer. The reaction zone shifted upstream and the flame thickness decreased as either the geometrical length of porous medium increased or the absorption coefficient decreased.

• Korean Journal of Clinical Laboratory Science
• /
• v.43 no.3
• /
• pp.124-132
• /
• 2011

The aim of this study was to evaluate the effects of the photosensitizer photogem with light-emitting diode (LED) on vancomycin-resistant enterococci (VRE). Two VRE strains isolated from the feces of patients. that was identificated Enterococcus faecium (vanA) and Enterococcus gallinarum (vanC1) using traditional biochemical tests and confirmed VRE genotyping from using polymerase chain reaction. In addition, three strains were used Enterococcus. faecalis CDC-286 (vanA), E. faecalis CDC-583 (vanB) and E. gallinarum CDC-42 (vanC1). To examine the antimicrobial effect of photogem mediated photodynamic therapy (PDT) against, CFU quantification and Disk diffusion antimicrobial susceptibility test were evaluated. The effects of Photodynamic therapy was not associated with genotype. Photogem mediated PDT perfectly inhibited the colony formation of E. faecalis CDC-286. The number of viable bacteria decreased greatly after PDT application with photogem $50{\mu}g/mL$ and energy density of $15J/cm^2$. The diameter of inhibition zone was increased to after PDT more than before PDT. The case of vancomycin disc on E. faecalis CDC-583 and E. galinanum-Patient were changed from resistant to intermediate resistant, from intermediate resistant to susceptable. These results demonstrate that lethal photosensitization of VRE can be achieved using photogem plus 630 nm LED irradiation.