• Applied Science and Convergence Technology
• /
• v.24 no.4
• /
• pp.96-101
• /
• 2015

Quantitative evaluation of photocatalytic activity of oxide nanoparticles in aqueous solution is quite challenging in that the kinetic reaction rate is determined by a complicated interplay among various limiting factors such as light scattering and absorption, diffusion and adsorption of reactants in condensed liquid phase, photoexcited charge separation and recombination rate, and the exact nature of active sites determined by detailed morphology and crystallinity of nanocrystals. Here, we present our simple experimental results showing that the kinetic regime of a typical photocatalytic degradation experiment over UV-irradiated $TiO_2$ nanoparticles in aqueous solution is in that dominated by the photoactivity of $TiO_2$ and its concentration. This result lays a firm ground of using the measured kinetic reaction rate in evaluating photocatalytic efficiency of oxide nanocrystals under evaluation.

• YAKHAK HOEJI
• /
• v.7 no.2_3
• /
• pp.67-71
• /
• 1963

Studies the reaction mechanism and optimal reaction condition of the process of preparing sodium isocyanate, by means of heating of sodium carbonate and urea. Proposing, at the sametime, the quantitative analyzing method of sodium isocyanate in the presence of impurities of $Na_{2}CO_{3}$, urea and biuret. 1. Sodium isocyanate could be prepared by means of heating reaction of sodium carbonate and urea. 2. Adding urea into the heated sodium carbonate is reasonable. 3. Quantitative analysis of sodium isocyanate in the presence of impurities, $Na_{2}CO_{3}$, urea and biuret could be done by the following method:-adding nitrobarite solution into sample solution in order to remove $CO_{3}"$ and neutralize the solution, filtering off $BaCO_{3}$, and then precipitating isocyanate as a silver salt, filtering off AgNCO, and then, titrating remaining $AgNO_{3}$ with $NH_{4}SCN$, (indicator $FeNH_{4}(SO_{4})_{2})$/TEX>

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.49-49
• /
• 2003

Nanometer sized zinc oxide (ZnO) powder was synthesized by a novel "solution-combustion method" and its photocatalytic activity was evaluated with the recovery of Ag from a used photofilm developing solution. Different parameters affecting the reaction rates like wavelength of the W light used, reaction temperature, mass of the used photocatalyst, and effect of scavenger were tested. The optimum parameters were found as follows. UV wavelength of less than 385nm, reaction temperature between 40- 60 $^{\circ}C$, photocatalyst concentration of 3-6 g/1, and scavenger concentration of 0.3-0.4 g/1.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.3
• /
• pp.677-690
• /
• 2020

In this article, we study a reaction-diffusion system with homogeneous Dirichlet boundary conditions, which describing a three-species food chain model. Under some conditions, the predator-prey subsystem (u₁ ≡ 0) has a unique positive solution (${\bar{u_2}}$, ${\bar{u_3}}$). By using the birth rate of the prey r1 as a bifurcation parameter, a connected set of positive solutions of our system bifurcating from semi-trivial solution set (r₁, (0, ${\bar{u_2}}$, ${\bar{u_3}}$)) is obtained. Results are obtained by the use of degree theory in cones and sub and super solution techniques.

• Korea-Australia Rheology Journal
• /
• v.17 no.4
• /
• pp.199-205
• /
• 2005

Carbon dioxide was absorbed into aqueous polyethylene oxide (PEO) solution containing AMP in a flat-stirred vessel to investigate the effect of non-Newtonian rheological behavior of PEO on the rate of chemical absorption of $CO_2$, where the reaction between $CO_2$ and AMP was assumed to be a first-order reaction with respect to the molar concentration of $CO_2$ and AMP respectively. The liquid-side mass transfer coefficient, which was obtained from the dimensionless empirical equation containing the properties of viscoelasticity of the non-Newtonian liquid, was used to estimate the enhancement factor due to chemical reaction. PEO with elastic property of non-Newtonian liquid made the rate of chemical absorption of $CO_2$ accelerate compared with Newtonian liquid based on the same viscosity of the solution.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.3
• /
• pp.7-20
• /
• 2007

We examined the steady state solution for a strongly exothermic mixtures in some class A geometries subjected to different boundary conditions under Arrhenius, Bimolecular and Sensitised reactions. The solution of the governing nonlinear reaction diffusion equation was obtained using the variational method formulation executed in Mathematica package. The paper elucidates the influence of geometry, boundary conditions and types of reaction on the thermal ignition of the reactive mixture. Apart from validating known results in literature, the solution gave further insight into the influence of material properties and conditions on the occurrence of thermal ignition.

• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.273-279
• /
• 2015

Effects of passive film quality by chemical passivation and solution flow on the corrosion behavior of 304 stainless steel in HCl solution were investigated using a coloration indicator, and by corrosion weight loss, electrochemical polarization and element dissolution measurements. A high redness degree suggests a low passive-film integrity for 304 stainless steel following air exposure, while the minimum redness degree for the samples after chemical passivation suggests a high passive-film integrity. In the static condition, samples subjected to air exposure exhibited a high corrosion rate and preferential dissolution of Fe. Chemical passivation inhibited the corrosion rate due to the intrinsically high structural integrity of the passive film and high concentrations of Cr-rich oxides and hydroxide. Solution flow accelerated corrosion by promoting both the anodic dissolution reaction and the cathodic reaction. Solution flow also altered the preferential dissolution to fast uniform dissolution of metal elements.

• Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.174-180
• /
• 2005

Nano-sized iron was synthesized using borohydride reduction of $Fe^{3+}$ in aqueous solution. A wide range of synthesis conditions including varying concentrations of reagents, reagent feeding rate, and solution pH was applied in an aqueous system under anaerobic condition. The reactivity of nano-sized iron from each synthesis was evaluated by reacting the iron with TCE in batch systems. Evidence obtained from this study suggest the reactivity of iron is strongly dependent on the synthesis solution pH. The iron reactivity increased as solution pH decreased. More rapid TCE reduction was observed for iron samples synthesized from higher initial $Fe^{3+}$ concentration, which resulted in lower solution pH during the synthesis reaction. Faster feeding of $BH_4^-$ solution to the $Fe^{3+}$ solution resulted in lower synthesis solution pH and the resultant iron samples gave higher TCE reduction rate. Lowering the pH of the solution after completion of the synthesis reaction significantly increased reactivity of iron. It is presumed that the increase in the reactivity of iron synthesized at lower pH is due to less precipitation of iron (hydr)oxides or less surface passivation of iron.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.54-61
• /
• 1999

The industrial techniques of ultrasound have been used in the various fields, such as cleaning, medical surgery, emulsification, cell disruption etc. Especially the application of cell disruption was interested in the field of disinfection process in water by ultrasonic irradiation. It has been recognized that the ultrasounds are irradiated in aqueous solution, cavitation bubbles are generated and shock waves of high temperature and pressure are emitted as the bubbles are developed and finally broken, which function as a energy source to promote reaction efficiencies of various kinds of chemical reactions such as disinfection reaction in water. Therefore, this study was performed to apply the ultrasound for the disinfection method of infected drinking raw water and to discuss the limiting factors such as pH, sample volume and reaction temperature influenced on the removal efficiency of E. coli from experimental analysis of the results obtained in bench-scale plant. For the experiments to measure the influence of reaction parameters in the ultrasonic disinfection process, escalated reactivity of aqueous solutions was excellent when pH in aqueous solution was low, and sample volume was small. On the contrary, the reactivity of disinfection became elevated when reaction temperature was high. It was found that the rate constant of disinfection reaction was applied by Chick's law, reaction kinetics of Chick's law was irreversible and pseudo-first order at all the tested conditions.As a conclusion it appeared that the technology using ultrasonic irradiation can be applied to the treatment of disinfection in infected water which are difficult to be treated by conventional methods.

• Journal of Environmental Science International
• /
• v.17 no.3
• /
• pp.351-357
• /
• 2008

In order to develope an efficient way for the synthesis of highly pure 1,4-sorbitan solution from sorbitol, some experimental studies were performed. The reaction showed first order reaction with activation energy of 118.3 KJ/mol. Color of the product solutions changed to brown with reaction temperature and reaction time. The equilibrium contents of 1,4-sorbitan increased with decrease in reaction pressure, but the content of major impurity, sorbide, showed maximum about 550 torr vacuum with $H_3PO_4$ catalyst. The reasonable catalyst configuration was 0.26 wt% PTSA and 1 wt% $H_3PO_2$ and optimum reaction temperature and pressure range was $110\sim120^{\circ}C$ and $700\sim720$ torr vacuum, respectively. At optimum reaction conditions, we could obtain white product solutions of highly pure 1,4-sorbitan with sorbide less than 10 wt%. This white product solution is advantageous for preparation of high quality span, anti-fogging agent.