금광동지역(金光洞地域)의 제(第) 3 기(紀) 하부(下部) 마이오세司(世)의 장기층군중에서 산출되는 벤토나이트의 광물학적(鑛物學的) 및 성인적(成因的) 특성(特性)에 관(關)하여 연구(硏究)되었다. 벤토나이트는 장기암을 제외(除外)한 모든 장기층군의 구성(構成)멤버층(層)에서 산출된다. 그러나 중요(重要)한 벤토나이트 찬상(鑽床)은 주(主)로 눌대리응회암층(臺里凝灰岩層), 하부합탄층(下部合炭層) 및 현무암질응회암(玄武岩質凝灰岩)에 부존(賦存)되어 있다. 벤토나이트는 주(主)로 스멕타이트(주(主)로 몬모릴로나이트)와 그리고 소량(少量)의 석영(石英), 크리스토발라이트, 단백석(蛋白石), 장석(長石) 등(等)으로 구성(構成)되어 있고 곳에 따라 클리놀틸로라이트, 할로이사이트, 석제(石齊)가 수반(隨伴)된다. 벤토나이트에 대(對)하여 현미경관찰(顯微鏡觀察), X선교절분석(X線翹折分析), 열분석(熱分析), 외선분광분석(外線分光分析), 주사전자 현미경관찰(顯微鏡觀察), 층간화합반응(層間化合反應), 및 화학분석(化學分析) 등(等)의 방법(方法)으로 연구(硏究)되었다. 스멕타이트는 보통 특징적(特徵的)인 꾸부러진 연변부(緣邊部)를 갖는 불규칙(不規則)한 스폰지 모양으로 산출되지만 경우(境遇)에 따라서는 완만하게 만곡(彎曲)되거나 또는 평탄(平坦)한 얇은 엽상(葉狀)으로 산출되기도 한다. 대부분의 스멕타이트는 격자층문전(格子層聞電)가 0.25~0.42로서 전형적(典型的)인 몬모릴로나이트임을 지시(指示)해준다. 그러나 간혹 바이델라이트에 해당(該當)하는 격자열전하(格子閱電荷)를 보여 주는 시료(試料)도 있다. 결정화학적(結晶化學的) 자료(資料)로 볼 때 8면체구조층(面體構造層)에서는 $Fe^{3+}$가 $Al^{3+}$을 치환(置換)하고 있으며 4면체구조층(面體構造層)에서는 $Si^{4+}$가 다른 이온에 의(依)하여 별(別)로 치환(置換)되어 있지 않다. 층상격자문(層狀格子問)에는 주(主)로 $Ca^{2+}$가 존재(存在)한다. 따라서 이 지역(地域)의 스멕타이트는 dioctahedral 칼슘몬모릴로나이트이다. 벤토나이트의 산출상태와 조직(組織)은 스멕타이트, 크리스토발라이트 단백석(蛋白石) 및 비석(沸石)이 응회질(凝灰質) 물질(物質)로부터 속성작용(續成作用)에 의(依)하여 생성(生成)되었음을 지시(指示)하여 준다. 스멕타이트의 원암(原岩)은 조면암질(組面岩質) 또는 현무암질(玄武岩質) 응회암(凝灰岩)이며 조면암질보뢰회암(粗面岩質普雷灰岩)으로 으로부터 유래(由來)된 스멕타이트는 현무암질(玄武岩質) 응회암(凝灰岩)으로 유래(由來)된 것 보다 $Al_2O_3$를 높게 그리고 $Fe_2O_3$를 낮게 함유(含有)하고 있다.
This study was undertaken to investigate the effect of indomethacin on the distribution of Langerhans cells and T-lymphocytes related with immune response of 4-Nitroquinoline-1-oxide induced carcinogenesis at the palate and tongue of albino rat. 54 Sprague-Dawley strain 10 weeks old albino rats, about 150gm weighted, divided into a normal group of 6 rats without treatment, a control group of 12 rats given indomethacin, a carcinogenesis group of 18 whose palatal mucosa were appiled with 4-Nitroquinoline-1-oxide three times a week, and experimental group of 18 rats were treated with indomethacin and whose palatal mucosa were applied 4-Nitroquinoline-1-oxide. All these 54 rats were subjected to be observed as being ATPase stained specimens, specimens for the observation of light and electron microscope, and T-lymphocyte stained specimens. The obtained results were summarized as follows; 1. In carcinogenesis group, proliferation of epithelial layer and rete peg were observed early period of the experiment and showed parakeratosis, individual cell keratinization, acanthosis, and lymphocyte infiltration from 13th week of the experiment on lightmicroscopically, while experimental group showed less reaction than that of carcinagenesis group. 2. The number of Langerhans cells in normal group rarely changed until 21st week of the experiment, while the Langerhans cells increased markedly from 3rd week of the experiment in control group. 3. The number of Langerhans cells were decreased markedly and persistantly until 21st week of the experiment both in carcinogenesis and experimental groups. 4. Appearance of the T-helper cells and T-suppressor cells were minimal and irregullar in number both in normal and control groups. Thus it is assumed that administration of indomethacin and distribution of Langerhans cells showed close relation. 5. In carcinogenesis and experimental groups, the number of the T-helper cells was apparently inereased than that of the T-suppressor cells, but increasing pattern in experimental group was less than in carcinogenesis group. These cells increased most in the 21st week, decreased from the 23rd week and the appearance of these cells were irregular in general throughout the experiment.
최근 콘크리트 구조물은 염해, 중성화 및 동결융해 등에 의한 내구성능 저하의 사례가 증가하고 있다. 이렇게 내구성능이 저하된 콘크리트에 대한 다양한 대책이 강구되고 있으며, 그 중에서도 콘크리트의 표면을 보호하여 내구성능 저하의 요인을 차단하는 표면처리공법이 많이 사용되고 있다. 그러나 에폭시 등 유기계 및 시멘트계 보수재는 콘크리트의 물성의 차이로 인하여 시간이 경과함에 따라 보수층의 파단 및 들뜸 등 문제가 발생하는 사례가 보고되고 있다. 저자들은 콘크리트의 물성과 동일한 무기계를 주성분으로 한 표면 성능 개선제를 콘크리트에 도포하면, 칼슘이온 등과 반응하여 콘크리트의 조직이 치밀해짐으로써 $CO_2$ 가스, 염소이온 및 물 등 내구성능 저하요인을 차단하는 보수재를 개발하고 있다. 본 연구에서는 개발된 표면성능 개선제의 침투성능, 수밀성능, 통기성능, 화학저항성능, 용출저항 성능 및 열화된 콘크리트에 대한 적용성에 대하여 평가하였다. 그 결과, 표면성능 개선제는 콘크리트의 내부로 10mm 이상 침투되며 콘크리트의 수밀성능 및 통기성능 등을 향상시키는 것으로 나타났다. 따라서, 본 연구에서 개발된 표면성능 개선제를 콘크리트 구조물에 도포하면 콘크리트의 내구성능 저하를 방지할 수 있을 것으로 판단된다.
활성탄에 의한 Acid black(AB)과 Quinoline yellow(QY)의 등온흡착과 속도실험을 염료의 초기농도, 접촉 시간, 온도 및 pH를 흡착변수로 수행하여 등온흡착과 동력학적, 열역학적 파라미터에 대해 조사하였다. 흡착평형자료는 Freundlich 등온흡착식에 잘 맞았으며, 계산된 Freundlich 분리계수 값으로부터 활성탄이 AB와 QY를 효과적으로 제거할 수 있다는 것을 알았다. 속도실험 데이터는 흡착공정은 유사 이차 반응속도식이 오차율 10% 이내로 잘 맞았다. 입자 내 확산식에 대한 결과는 두단계의 직선으로 구분되었다. 입자내 확산을 나타내는 두 번째 직선의 기울기가 경계층 확산의 기울기보다 작아서 입자 내 확산이 속도지배단계인 것을 확인하였다. 열역학 실험으로부터 AB와 QY의 활성화 에너지는 각각 19.87 kJ mol-1, 14.17 kJ mol-1였고 물리흡착공정(5 ~ 40 kJ mol-1)에 해당하였다. 활성탄에 의한 AB와 QY의 흡착반응의 자유에너지 변화는 298 ~ 318 K 범위에서 모두 음의 수치를 나타냈기 때문에 흡착반응이 자발적이었으며 온도가 증가할수록 자유에너지 값이 감소하였기 때문에 자발성이 더 높아졌다. pH 변화실험 결과, 활성탄에 의한 AB와 QY는 해리하여 발생한 음이온의 영향으로 pH 3에서 가장 높은 흡착제거율을 나타냈으며, 흡착메카니즘은 정전기적 인력이었다.
슬라이딩 궤도는 콘크리트 궤도와 교량 바닥판 사이에 저마찰 슬라이드층을 두어 레일신축이음장치와 같은 특수 장치를 적용하지 않고도 궤도-교량 상호작용 효과를 효과적으로 저감시킬 수 있는 새로운 궤도 시스템으로 개발되고 있다. 이 논문에서는 장경간 교량에 슬라이딩 궤도와 레일신축이음장치를 각각 적용한 경우에 대하여 궤도-교량 상호작용해석을 수행하고 그 결과를 비교 검토하였다. 대상교량은 상호작용 효과를 극대화하기 위하여 9경간 연속 PSC교와 2경간 연속 강합성교를 포함하며, 총 연장 1,205m, 최대 고정지점간 거리 825m인 장경간 교량을 선정하였다. 해석결과 슬라이딩 궤도는 레일신축이음장치를 적용한 경우보다 레일 부가 축력이 더 작은 것은 물론, 지점부에 재하되는 수평 반력 또한 작게 나타나 궤도-교량 상호작용 저감 효과가 뛰어난 것으로 확인되었다. 반면 슬라이딩 궤도는 온도하중에 의해 높은 슬래브 축력이 발생되므로, 궤도 설계 시 슬래브 축력에 대한 단면 설계에 주의를 기울일 필요가 있다.
Background: Minor ginsenosides, those having low content in ginseng, have higher pharmacological activities. To obtain minor ginsenosides, the biotransformation of American ginseng protopanaxadiol (PPD)-ginsenoside was studied using special ginsenosidase type-I from Aspergillus niger g.848. Methods: DEAE (diethylaminoethyl)-cellulose and polyacrylamide gel electrophoresis were used in enzyme purification, thin-layer chromatography and high performance liquid chromatography (HPLC) were used in enzyme hydrolysis and kinetics; crude enzyme was used in minor ginsenoside preparation from PPD-ginsenoside; the products were separated with silica-gel-column, and recognized by HPLC and NMR (Nuclear Magnetic Resonance). Results: The enzyme molecular weight was 75 kDa; the enzyme firstly hydrolyzed the C-20 position 20-O-${\beta}$-D-Glc of ginsenoside Rb1, then the C-3 position 3-O-${\beta}$-D-Glc with the pathway $Rb1{\rightarrow}Rd{\rightarrow}F2{\rightarrow}C-K$. However, the enzyme firstly hydrolyzed C-3 position 3-O-${\beta}$-D-Glc of ginsenoside Rb2 and Rc, finally hydrolyzed 20-O-L-Ara with the pathway $Rb2{\rightarrow}C-O{\rightarrow}C-Y{\rightarrow}C-K$, and $Rc{\rightarrow}C-Mc1{\rightarrow}C-Mc{\rightarrow}C-K$. According to enzyme kinetics, $K_m$ and $V_{max}$ of Michaelis-Menten equation, the enzyme reaction velocities on ginsenosides were Rb1 > Rb2 > Rc > Rd. However, the pure enzyme yield was only 3.1%, so crude enzyme was used for minor ginsenoside preparation. When the crude enzyme was reacted in 3% American ginseng PPD-ginsenoside (containing Rb1, Rb2, Rc, and Rd) at $45^{\circ}C$ and pH 5.0 for 18 h, the main products were minor ginsenosides C-Mc, C-Y, F2, and C-K; average molar yields were 43.7% for C-Mc from Rc, 42.4% for C-Y from Rb2, and 69.5% for F2 and C-K from Rb1 and Rd. Conclusion: Four monomer minor ginsenosides were successfully produced (at low-cost) from the PPD-ginsenosides using crude enzyme.
본 논문에서는 탄화규소 섬유강화 탄화규소 복합재료에 내환경 코팅을 수행한 후, 열 기계적 특성평가에 대한 연구를 수행하였다. 초기분말은 성형공정도중 흐름성을 좋게 하기 위해 분무건조법으로 구형의 분말을 제조하였다. 내환경 코팅재는 복합재료가 산화되거나 고온 수증기와 반응하는 것을 방지하기 위해 행하여 지는데, 본 연구에서는 액상침투법(LSI)으로 제조한 복합재에 실리콘으로 본드코팅을 하고 그 위에 대기플라즈마용사법으로 뮬라이트(mullite)와 무게비로 12% 이터븀 실리케이트(ytterbium silicate)가 혼합된 복합재를 코팅하였다. 대기플라즈마 코팅공정 시 성형변수로서 분무거리를 100, 120 그리고 140 mm로 변화시켰다. 그 후 $1100^{\circ}C$의 온도에서 100시간동안 유지하는 실험과 $1200^{\circ}C$의 온도에서 열충격을 가하는 싸이클을 3000회 반복하였다. 열내구성 시험동안 계면 박리는 일어나지 않았지만, 현저한 균열들이 코팅층 내에서 발견되었다. 균열밀도와 균열의 길이는 코팅도중의 분무거리에 의존하여 변화하였다. 열 내구성 시험 후, 압흔 시험을 통해 기계적 열화거동을 분석하였는데, 시험의 방식이나 조건들이 하중-변위 곡선의 거동에 영향을 주었다.
Even though titanium(Ti) and its alloys are the most used dental implant materials, there are some problems that Ti wears easily and interferes normal osteogenesis due to the metal ions. Ti coated with bioactive ceramics such as hydroxyapatite has also such problems as the exfoliation or resorption of the coated layer, Recent studies on implant materials have been proceeding to improve physical properties of the implant substrate and biocompatibility of the implant surfaces. The purpose of the present study was to examine the physical property and bone tissue compatibility of bioinert nitrides ion plated Ti, Button type specimens(14mm in diameter, 2.32rrun in height) for the abrasion test and cytotoxicity test and thread type implants(3.75mm in diameter, 6mm in length) for the animal experiments were made from Ti(grade 2) and 316LVM stainless steel. Ti specimens were ion plated with TiN, ZrN by the low temperature arc vapor deposition, and the depth profile of the TiN/Ti, ZrN/Ti ion plated surface was examined by Auger Electron Spectroscopy. Three kind of button type specimens .of TiN/Ti, ZrN/Ti and Ti were used for abrasion test, and HEPAlClC7 cells and CCD cells were cultivated for 4 days with the specimens for cytotoxicity test. Thread type implants of TiN/Ti, ZrN/Ti, Ti, 316LVM were implanted on the femur of 6 adult dogs weighing 10kg-13kg. Two dogs were sacrified for histological examination after 45 days and 90 days, and four dogs were sacrified for the removal torque test of the implant') after 90 days. The removal torque force was measured by Autograph (Shimadzu Co., AGS-1000D series, Japan). Abrasion resistance of TiN/Ti was the highest, and that of ZrN/Ti and Ti were followed. The bioinert nitride ion plated Ti had much better abrasion resistance, compared with Ti, In the cytotoxicity test, the number of both cells were increased in all specimens, and there were no significant difference in cytotoxic reaction among all groups (p>0.1), In histological examination, 316LVM showed the soft tissue engagement in interface between the implant and bone, but the other materials after 45 days noted immature new bone formation in the medullary portion along the implant surface, and those after 90 days showed implant support by new bone formation in both the cortical and the medullary portion, The removal torque force of Tilv/Ti showed significantly higher than that of Ti(p(O,05). The difference in removal torque force between TiN/Ti and ZrN/Ti was not significant(p>0.05), and that of 316LVM was lowest among all groups(p<0.05). These results suggest that bioinert nitrides ion plated Ti can resolve the existing problems of Ti and bioactive ceramics, and it may be clinically applicable to human.
병원성 미생물을 측정할 수 있는 분석시스템을 구성하기 위해 면역학적 성분들을 합성하였고, 이를 이용하여 모델 시스템을 구성함으로써 균 세포 분석원리가 연구되었다. 구성성분을 준비하기 위해 Salmonella thompson에 대한 복합 클론항체를 면역 친화 크로마토그래피를 이용하여 정제하였고, 이렇게 정제된 항체를 Streptavidin과 horseradush peroxdase에 화학결합시켰다. 항체와 Streptavidinfdm은 각각 SMCC와 SPDP에 의해 활성화 되있고 두 물질을 반응시킴으로써 중합체가 합성되었다. 중합체는diaminobiotion 젤과 sephades G-100젤을 이중 층으로 쌓은 칼럼을 이용하여 정제되었다. 항체- HRP 중합체의 합성을 위해, HRP를 $NAIO_4$ 처리에 의해 안정화된 중합체는 Biohel A5M을 이용한size exchusion크로토그래피로 정제되었다. 이렇게 준비된 중합체들과 dot-bloner 그리고 biotim이 고정화된 nitrocellulose membrane($12\mum$ pore size)을 이용하여 모델시스템을 구성하였다. 분석물질(S.Thormpson cells)을 먼적 액상에서 두 중합체와 반응되었고 반응먹을 membrane이 정착된 blotter에 옮긴 후 하부에 진공을 걸어 면역복합체를 biotin-streptavidin 반응에 의해 membrane 표면에 포획하였다.최적조건 하에서 시스템의 균 세포 분석원리를 확인하였으며 측정하한농도는 약 $1{\mu}g/m{\ell}(10^5 {\cdot} 10^6\;cells/m{\ell}$인 것으로 나타났다. 이러한 측정성능의 주요조절인자는 두항체 종합체 농도의 증가는 항원-항체 응집반응을 초래하는 것으로 나타났다.
한국 전통누룩으로부터 분리한 신종 Aspergillus coreanus NR 15-1가 생산하는 a-amylase의 효소학적 특성을 조사했다. 공시균주가 생산하는 a-amylase는 황산암모늄을 이용한 분별 침전, CM-cellulose, DEAE-cellulose, Sephadex G-100, hydroxyapatite column chromatography를 통하여 8.7%의 수율을 보이며, 78배로 정제되었다. 공시균주의 a-amylase의 분자량은 Sephadex G-100 겔 여과에 의해 49 kDa으로 나타났으며, SDS-PAGE에 의하여 51 kDa으로 측정되어 본 효소는 monomer로 추정할 수 있었다. 정제효소는 pH 4.0∼11.0 사이에서 안정하였으며, 반응최적 pH는 5.0이었고, 5$0^{\circ}C$ 이하의 온도에서 비교적 안정하며, 반응최적온도는 45$^{\circ}C$로 나타났다. 정제효소는 금속이온에 의해 효소활성에 영향을 받지 않았으나, N-bromosuccinimide에 의해서는 효소활성이 완전히 저해되어 본 공시균주의 a-amylase의 활성부위에는 tryptophan 잔기가 관여한다고 추정할 수 있었다. 정제효소의 전분분해물은 maltose, maltotriose 등의 oligosaccharide를 형성하므로 a-amylase임을 확인할 수 있었다. 신종 누룩시상균인 Aspergillus coreanus NR 15-1의 a-amylase는 5$0^{\circ}C$ 이하의 온도와 pH 4.0∼11.0사이에서 안정하여 온도와 pH의 안정성이 우수하여 누룩제조용 사상균으로 사용이 가능함을 알 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.