• Journal of the Korean Ceramic Society
• /
• v.44 no.2 s.297
• /
• pp.93-97
• /
• 2007

High purity Si powder was prepared in the system of $SiO_2-Mg$ combustion reaction. Various conditions of combustion reaction and leaching were investigated. As the particle size of Mg decreased and the compaction pressure increased the quantity of the unreacted power was decreased. In the acid leaching of MgO, increasing particle size, reaction temperature, rotating speed and reaction time made leaching effect low. Final Si powder produced by combustion and leaching reaction, has a high purity of 99.9% with irregular shape.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.79-86
• /
• 2001

A method for actively minimizing dynamic reaction forces in a flexible structure subject to persistent excitations is presented. One difficulty with the method, however, is that forces and moments do not converge as quickly as displacements in mathematical discretization of continuous systems, so a controller based on a truncated model of a continuous system can produce poor results. A technique using residual flexibility matrix is presented for correcting the truncated force representation. A controller designed for reaction force minimization, using the residual flexibility matrix, is applied to a model of a flexible structure, and the results are presented. Implications of various reaction force penalty combinations on the resulting control performance are also discussed.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.4
• /
• pp.234-242
• /
• 1996

The direct reaction method has been used for the fabrication of Al-Mg/$Al_2O_3$ functionally gradient materials. It was found that the reaction layer of the Al-Mg/$Al_2O_3$ powder compact at $900^{\circ}C$ under air atmosphere led to the formation of reaction layers with varying ceramic phase contents. As the results of experiments by using the TGA system, the characteristics and growth behavior of the reaction layers were affected by the reaction temperature, the gas flow rate, the Mg contents and the $Al_2O_3$ contents.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.195-195
• /
• 2006

A superior electrophilic substitution reaction medium that is non-toxic, relatively less corrosive, and non-volatile electrophilic substitution reaction to afford high molecular weight linear and hyperbranched polyetherketones (PEK' s) was developed. The system has very strong driving force to give extra ordinary high molecular weight linear and hyperbranched PEK' s. The reaction medium was further extended to prepare various types of copolymers and covalently grafted polymers onto carbon nanotube (CNT) or carbon nanofiber (CNF). By using characteristic hydrophilic nature of the reaction medium, hyperbranched PEK' s could be synthesized from commercially available $A_3\;+\;B_2$ monomers without network formation via selective solubility of the monomers.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.248-251
• /
• 1999

The optimal reaction conditions are determined for a PET process, which consists of transesteriflcation, prepolymerization and polycondensation reactors in series. Based on the simulation results of the reactor system, we scrutinize the cause and effect between the reaction conditions and the final properties of the polymer product. We then select the process variables with significant influence on the properties of polymer as control variables and calculate the optimal reaction conditions by iterative dynamic programming (IDP) algorithm with constraints. A new reaction scheme incorporating reactions for by-products as well as three main reactions is considered in the constrained IDP method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.233-236
• /
• 2004

In this paper, a new sensorless vibration control scheme is proposed for a flexible manipulator system. A robust sliding mode controller incorporating with a ‘reaction moment observer’ used for the estimation of the reaction moment reciprocally acting on flexible arm and hub inertia is introduced to achieve desired control target. The rigid body dynamics of the single-link flexible manipulator is simply considered in the design of the sliding mode controller. Then, the reaction moment is estimated by the proposed reaction moment observer to suppress the residual vibration of the flexible arm. The performance of the proposed control scheme is verified by computer simulation and experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.537-538
• /
• 2006

Split and recombine type reaction module was made by electrical discharge machining. The reaction module has special features to well mix the two reactants which have high flow ratio or high concentrations difference. It could be achieved by deviding one flow equally by two and inserting second flow in between. The mixing performance was measured by a parallel competing reaction with iodide-iodate system. The result shows that the developed three inlets micromixer has better mixing efficiency than comercialized Y type micromixer.

• Mass Spectrometry Letters
• /
• v.3 no.4
• /
• pp.108-111
• /
• 2012

An experimental study on the nascent product of the OH heterogeneous reaction with NaCl was performed under dry and wet conditions using a bead-filled flow tube system coupled to a high-pressure chemical ionization mass spectrometer. The ozone concentration in the flow tube for the atomic hydrogen removal was varied in order to control the conversion reaction of molecular chlorine into HCl for the identification of the nascent product. The mass spectrometric observation was that the $O_3$ introduction reduced the concentration HCl, while it increased the concentration of $Cl_2$ and ClO. Based on the experimental results, we suggest that the nascent product of the titled reaction is gaseous $Cl_2$, which is followed by fast conversion into HCl in presence of H. No significant difference in the concentration profile between under dry and wet (RH = 2%) conditions was observed.

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.94-102
• /
• 1988

A quantitative description of the principle of least motion is suggested. The reaction path function of electronic variables, its norm and the reaction path average energy, which are unique for a given reaction path on a potential energy surface of a reacting system, are defined and their characteristics are discussed. It is postulated that the norm of the function and the average energy can be used as a criterion for identification of the preferred path of a unimolecular isomerization reaction. For a molecule with a certain symmetry, the preferred path, with which Woodward-Hoffmann rule agrees, is immediately identified without laborious computation.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.151-157
• /
• 2014

We have reported the reaction probability, integral reaction cross section, and rate constant for the title system calculated with the aid of a time-dependent wave packet approach. The ab initio potential energy surface (PES) of Prudente et al. (Chem. Phys. Lett. 2009, 474, 18) is employed for the purpose. The calculations are carried out over the collision energy range of 0.05-1.4 eV for the two reaction channels of H + LiH ${\rightarrow}$ Li + $H_2$ and $H_b$ + $LiH_a$ ${\rightarrow}$ $LiH_b$ + $H_a$. The Coriolis coupling (CC) effect are taken into account. The importance of including the Coriolis coupling quantum scattering calculations are revealed by the comparison between the Coriolis coupling and the centrifugal sudden (CS) approximation calculations.