• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.515-518
• /
• 1997

Resident time of the centrifugal extractor for organic phase extraction using a height controlled separator weir and a divert plate is the important factor that affects significantly the chemical material extraction and the productivity in the chemical and mechanical processes. In this paper, it describes the design of the device for extraction of an organic phase from radioactive wastes, and considers phase separating weir and divert disk, both being designed to be adjustable in their positions, for effectively separating an organic phase. A height-adjustable separating weir unit used for separating the organic phase from the aqueous phase using a phase separating weir and designed to control the height of the separating weir as desired so as to allow the weir to be positioned at a boundary layer between two separated phases. The centrifugal extractor controls satisfactorily the mixed reaction time of two phases within the separator regardless of the variations of the mixing ratio of the two phases and the rotating speed of the extractor, is designed to be adjustable in its position in the vertical direction, thus allowing the user to appropriately select the mixed reaction time of the two phases within the extractor as desired. From development of a centrifugal extractor, it can effectively recover such usable elements, and preferably reducing the output quantity of radioactive wastes.

• 생명과학회지
• /
• 제10권4호
• /
• pp.368-373
• /
• 2000

Enteroviruses in the environment pose a public health risk because they can be transmitted via the fecal-oral route through contaminated water, and low numbers are able to initiate an infection in humans. Because the levels of viruses typically found in environmental water and drinking water are low, they must be concentrated from hundreds to thousands of liters of water. Therefore, the main goal of this study was the development of a rapid, simple and efficient procedure to concentrate, isolate and detect enteroviruses from environmental water samples. Viruses were first concentrated by adsorption to 1 MDS cartridge filter and then eluted with approximately 0.5 liter of 1.5% beef extract/0.05M glycin(pH 9.4). In this study, several procedures to concentrate and purify intact viruses from beef extract obtained from the adsorbent filters were tested. Among them, organic floccuration was the best reliable method for reconcentration. sample volume could be reduced to 200∼400 folds and the efficiency of virus recovery through the procedure was over 72%. Finally, the samples were filtered through a membrane disk filter and then analyzed by either the plaque assay or combined cell culture-polymerase chain reaction.

• 전기화학회지
• /
• 제17권3호
• /
• pp.201-208
• /
• 2014

본 연구에서는 산화그래핀과 카본블랙의 혼합담체를 이용하여 내구성이 향상된 백금촉매를 폴리올법으로 제조하였다. 삼전극 순환전압전류법을 이용한 전기화학성능 측정결과 적절한 비율로 조절된 혼합담지체에 백금을 담지시켰을 경우 초기 성능 감소없이 장기내구성이 향상되는 것으로 나타났다. 또한 회전원판전극을 이용하여 산소환원반응을 수행한 결과 혼합담체에 담지된 백금촉매가 카본블랙 단일담체에 담지된 백금촉매보다 우수한 고유활성값을 나타내었다.

• 대한금속재료학회지
• /
• 제50권2호
• /
• pp.176-182
• /
• 2012

The main purpose of this study was to evaluate the endurance against Al alloy melts and wear resistance of an in-situ synthesized titanium matrix composite (TMC) sleeve for aluminum alloy die-casting. The conventional die-casting shot sleeve material was STD61 tool steel. TMCs have great thermal stability, wear and oxidation resistance. The in-situ reaction between Ti and $B_4C$ leads to two kinds of thermodynamically stable reinforcements, such as TiBw and TiCp. To evaluate the feasibility of the application to a TMCs diecasting shot sleeve, the interfacial reaction behavior was examined between Al alloys melts with TMCs and STD61 tool steel. The pin-on-disk type dry sliding wear test was also investigated for TMCs and STD61 tool steel.

• 한국미생물·생명공학회지
• /
• 제34권4호
• /
• pp.342-351
• /
• 2006

병원내 항생제 다제 내성을 일으키는 CTX-M형 ESBL을 생성하는 E. coli와 Klebsielia pneumoniae의 생성현황을 조사하고 이들 균주로 인한 감염증치료와 역학적 조사연구에 도움이 되고자 효소의 유전형을 규명하였다. 2005년 7월-12월에 부산에 소재하고 있는 2개의 종합병원에서 분리된 E. coli와 K. pneumoniae 각각 153주, 52주를 수집하였다. 그 중에서 ESBL을 생성 하는 균주를 검출하기 위해 Double disk synergy test를 시행하여서 E. coli 23주와 K. pneumoniae 13주를 분리하였다. 균주의 동정은 Vitek system GNI card(bioMerieux Vitek Inc., Hazelwood, Mo., U.S.A.)로 확인하였고, 항생제감수성시험은 disk diffusion method 와 agar dilution method를 사용하였다. 분리된 균주들의 내성을 일으키는 ESBL유전형을 규명하기 위하여 Isoelectric focusing(IEF), polymerase chain reaction test, DNA sequencing을 시행하였다. A병원의 13주와 B병원의 10주로 총 23주의 E. coli(15.0%)와 A병원의 7주와 B병원의 6주로 K. pneumoniae 13주(25.0%)가 double disk synergy test 양성으로 ESBL 생성균주로 판정하였다. ESBL 생성 36균주를 대상으로 bla$_{TEM}$, bla$_{SHV}$, bla$_{CTX-M}$ 유전자 검출을 위한 PCR을 시행한 결과 bla$_{TEM}$ 유전자는 13주(36.1%), bla$_{SHV}$ 유전자는 13주(36.1%), bla$_{CTX-M}$ 유전자는 32주(88.9%)가 양성반응을 보여서 bla$_{CTX-M}$ 유전자를 가진 균주가 가장 많이 나타났다. 그리고, bla$_{TME}$, bla$_{SHV}$ 두 가지 유전자를 가지고 있는 균주는 1주(2.8%)만 나타났고 bla$_{TEM}$, bla$_{CTX-M}$두 가지 유전자를 가지고 있는 균주는 9주(25.0%), bla$_{SHV}$, bla$_{CTX-M}$ 두 가지 유전자를 가지고 있는 균주가 10주(27.8%)로 나타나 bla$_{CTX-M}$을 포함하는 복합유전자가 많이 증가함을 알 수 있었다. 또한 CTX-M형 ESBL을 생성하는 E. coli와 K. pneumoniae에 대한 cefutaxime의 MIC는 256 $\mu$g/m1 이상으로 ceftazidime의 16-256 $\mu$g/mL 이상보다 높은 분포를 보였다. 즉, CTX-M형 ESBL 유전자를 지닌 균주에 대한 cefotaxim의 MIC는 ceftazidime의 MIC에 비해서 상대적으로 높은 양상을 보였다. 이러한 결과는 국내의 대학병원 뿐 만 아니라 일반종합병원에서도 CTX-M형 ESBL 생성 E. coli와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한 정기적인 연구와 조사가 필요한 것으로 생각한다.

• Journal of Electrochemical Science and Technology
• /
• 제7권4호
• /
• pp.298-305
• /
• 2016

The development of non-precious metal based electrocatalysts is highly desired for the oxygen reduction reaction (ORR) as alternates to noble metal based ORR electrocatalysts. Herein, we report mononulcear copper(II) complex $[CuLbpy]ClO_4$ (L=4-[(2-hydroxyphenylimino)methyl]benzoic acid) containing poly(allylamine.HCl) polymer (PAlACuLbpy) as an electrocatalyst for oxygen reduction reaction (ORR). PAlACuLbpy was mixed with poly(acrylic acid) and tetraethylortho silicate to prepare a composite and then deposited on the screen printed electrode surface. The modified electrode (PAlACuLbpy/PCE) is highly stable and showed a quasi-reversible redox behavior with $E_{1/2}=-0.2V$ vs. Ag/AgCl(3 M KCl) in 0.1 M phosphate buffer at pH 7 under argon atmosphere. PAlACuLbpy/PCE exhibited a remarkable ORR activity with an onset potential of -0.1 V vs Ag/AgCl in 0.1 M PB (pH 7) in the presence of oxygen. The kinetics for ORR was studied by rotating disk voltammetry in neutral aqueous medium and the results indicated that the number of electrons involving in the ORR is four and the conversion products are water and hydrogen peroxide.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.204-207
• /
• 2007

DMFC(direct methanol fuel cell)는 액체연료의 이동과 저장의 용이성 때문에 이동용 장치를 위한 전원공급 장치로서 오랫동안 관심을 받아왔다. 하지만 methanol crossover는 DMFC의 상용화 이전에 해결해야 할 문제이다. 이를 위해 많은 분야에서 연구가 진행되고 있고, 그중에서 methanol에 저항성을 가진 촉매의 개발에 활발히 연구가 진행되고 있다. 본 연구에서는, 표연개질 된 PtCo/C 촉매를 사용하여 메탄올에 저항성을 가진 촉매를 합성하였다. 합성된 촉매의 size와 morphology를 알아보기 위해 transmission electron microscopy (TEM)를 사용하였다. 또한 methanol 존재 하에 산소환원반응의 activity를 알아보기 위해 Rotating ring disk electrode(RRDE) test를 하였고, MEA를 제작하여 full cell test도 병행하였다.

• Elastomers and Composites
• /
• 제23권3호
• /
• pp.223-229
• /
• 1988

The effect of triazine thiol derivative on the physical properties of silica-polychloroprene(CR) composites and glass fiber(MGF)-CR composites was investigated. Optimum cure time of the MGF composites filled with 2-dibuthylamino-4, 6-dithiol-s-triazine(DBT) was the fastest one, while maximum torque was the best in case of the silica composites filled with s-triazine-2,4,6-trithiol(TAT) on the Oscillating Disk Rheometer(ODR) test. Stress-strain curves of the composites showed that the physical properties such as 100% modulus, 300% modulus, tensile strength of the silica composites filled with DBT was very satisfactory and the silica composites filled with TAT was higher density of crosslinking than other crosslinked elastomer. In aging properties, elastomer filled DBT and TAT were progress post-curing reaction with increasing of aging time and it have been improved the tensile strength and crosslinking density.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.429-433
• /
• 2013

Silicon, carbon, and B4C powders were used as raw materials for the fabrication of porous SiC. ${\beta}$-SiC was synthesized at $1500^{\circ}C$ in an Ar atmosphere from a silicon and carbon mixture. The synthesized powders were pressed into disk shapes and then heated at $2100^{\circ}C$. ${\beta}$-SiC particles transformed to ${\alpha}$-SiC at over $1900^{\circ}C$, and rapid grain growth of ${\alpha}$-SiC subsequently occurred and a porous structure with elongated plate-type grains was formed. The mechanism of this rapid grain growth is thought to be an evaporation-condensation reaction. The mechanical properties of the fabricated porous SiC were investigated and discussed.

• Bulletin of the Korean Chemical Society
• /
• 제25권6호
• /
• pp.786-790
• /
• 2004

2-Aminoethanethiol (aet) has been used to make self-assembled monolayer (SAMs) on gold electrodes, which are subsequently modified with 3,4-dihydroxy phenylalanine (dpa). Such modified electrodes having various types of Au/aet-dpa were employed in the electrocatalytic oxidation of NADH. The purpose of this study to characterize the responses of such modified electrodes in terms of the immobilization procedure, pH of the solution and applied potential. The reaction of the surface immobilized dpa with NADH was studied using the rotating disk electrode technique and a value of $2.2{\times}10^4M^{-1}s^{-1}$ was obtained for the second-order rate constant in 0.1 M Tris/$NO_3^-$buffer (pH=8.0). The hydration behavior of the films was characterized by quartz crystal microbalance. When used as a NADH sensor, the Au/aet-dpa electrode exhibited good sensitivity and an excellent correlation (r ${\geq}$ 0.99) for NADH concentration which extended to $3.8{\times}10^{-3}$ M.