• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 추계학술대회 논문집
• /
• pp.160-164
• /
• 1991

The effect of various parameters, such as temperature, current density and operating valtage on the performance of phosphoric acid fuel cell stack was studied by using numerical analysis. The utilization ratio of reaction gas, inlet condition of reaction air and cooling air, inlet condition of cooling air flow latin were changed regularly, The results showed good agreements with the existing results and experimental ones.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.76-87
• /
• 1998

This study was carried out to investigate the effect of on temperature control from actuating method, recycling ratio and the position (top, middle and bottom) of set and controlled temperature within the reactor in adiabatic ebullated recycling condition, when the disturbance was occurred. Estimation of the solution were performed numerically using the finite difference method. It was assumed that the reaction is in constant with heat of reaction and the physical properties(density, heat capacity and viscosity, etc) of the reactants are same condition within the reactor.

• 한국안전학회지
• /
• 제3권1호
• /
• pp.37-45
• /
• 1988

This research investigated the condition for plant design on reclamation of waste plastic by heat decomposition. The results were summarized as follows 1. The highest of oil product by heat decomposition is about 54.7％. 2. The optimum reaction temperature is about 300­40$0^{\circ}C$. 3. The optimum reaction time is 2­3 hours. 4. When the flow rate of 8­16 cm/sec in column reactor the yield is maximum. 5. Waste plastics yielded of carbon black product by heat decomposition at the optimum condition is about 23.5%. 6. Calorific values 0：1 were 9820 Kcal/kg.

• Journal of Plant Biology
• /
• 제30권3호
• /
• pp.181-187
• /
• 1987

Copper inhibited PSII-mediated O2 evolution (H2OlongrightarrowDCIP, H2OlongrightarrowSiMo) but not PSImediated O2 uptake(DCIP. Asc.longrightarrowMV) in isolated Chinese cabbage chloroplasts. Copper toxicity on PSII-mediated O2 evolution was higher at alkaline condition than at acidic condition and was inhanced by light illumination after copper treatment. The increased toxicity by light illumination was not recovered by subsequent dark treatment. The inhibitory effect of copper on H2OlongrightarrowDCIP reaction was higher than that on H2OlongrightarrowSiMo reaction. This result suggests that there may be another inhibitory site of copper on PSII other than water oxidizing side of PSII.

• 생명과학회지
• /
• 제5권4호
• /
• pp.155-161
• /
• 1995

The effects of substrate concentration, enzyme concentration, reaction temperature, and water content were investigated in intramolecular esterification. This study used cyclohexane as organic solvent, power lipase as enzyme, and benzyl alcohol and octanoic acid as substrate. The initial reaction rate was found to be proportional to enzyme concentration; followed Michaelis-Menten equation for octanoic acid; and was inhibited by benzyl alcohol . The observed initial reaction rate first increased, then decreased with increasing reaction temperature, giving rise to the maximum rate at 20$\circ$. The drop in the reaction rate at higher temperature was to partition equilibrium change of substrate between organic solvent and hydration layer of enzyme molecule in addition to the deactivation by enzyme denaturation. Water layer surrounding enzyme molecule seemed to activate in organic solvent and the realistic reaction was done in the water layer. In the enzymatic reaction in organic solvent, the initial reaction rate was influenced by partition quilibrium of substrate, so the optimum condition of substrate concentration, enzyme concentration, reaction temperature, and water content would give a good design tool.

• 한국세라믹학회지
• /
• 제30권6호
• /
• pp.478-484
• /
• 1993

The influence of reaction conditions on the MnZn ferrite coprecipitation process were investigated using mixed metla sulfate solution and ammonium oxalate. In order to minimize the metallic ion losses and to control the particle size, the optimum reaction conditions were as follows; reaction temperature $25^{\circ}C$, metal sulfate concentration 0.3M, molar ratio of ammonium oxalate/mixed metal sulfate 1.1:1. The production yield was as high as 97.6% of theoretical yield at optimum reaction condition.

• 약학회지
• /
• 제27권3호
• /
• pp.245-247
• /
• 1983

In Bucherer-Berg's reaction of $\alpha$-piperidinoacetophenone with KCN and ($NH_{4})_{2}CO_{3}$ in dilute alcohol solution to form hydantoin, the expected 5-phenyl-5-piperidinomethylhydantoin was not formed. In this reaction $\alpha$-piperidinomethyl group was eliminated and 5-phenylhydantoin was obtained. According to GC/MS study of the reaction mixture, the one of the chromatograms, which has mole peak 124, was identified as a-piperidinoacetonitrile. Under the pressurized condition, diphenylhydantil was obtained instead of 5-phenylhydantoin, which might have dimerized to the former.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.189-193
• /
• 2008

본 연구는 zinc aluminate 촉매를 사용한 고압연속식 고정층 반응시스템에서의 대두유와 메탄올의 transesterification에 관한 것이다. 바이오디젤 제조를 위한 고압 연속식 고정층 촉매 반응에서 반응 조건이 메틸에스터 생성에 미치는 영향이 주로 조사되었다. 촉매가 없는 경우, 거의 모든 반응 조건에서 메틸에스터의 수율이 4.5% 이하로 매우 낮았지만, $300^{\circ}C$, 1,200 psi 조건에서는 19%의 메틸에스터 수율을 보여 주었다. 이는 반응 조건이 메탄올의 초임계점에 근접하였기 때문으로 보인다. 촉매 반응에서는 무촉매 반응과 비교하여 비교적 낮은 온도와 압력에서도 높은 메틸에스터 수율을 보여주었다. 또한 수율에 미치는 반응 조건의 영향을 살펴본 결과, 반응온도, 압력, 반응물에서 메탄올 몰비가 높을수록 높은 메틸에스터 수율을 보여주었다. 반응 변수 중에서도 반응온도가 메틸에스터 수율에 가장 큰 영향을 미치는 것으로 확인되었다.

• Fisheries and Aquatic Sciences
• /
• 제26권6호
• /
• pp.393-405
• /
• 2023

The aim of this research was to enhance the flavor of visceral extracts from skipjack tuna. Flavor precursors and the optimum condition for the Maillard reaction were determined. The flavor extract was prepared from the tuna viscera using Endo/Exo Protease controlled in 3 factors; temperature, enzyme amounts and incubation time. The optimal condition for producing tuna viscera protein hydrolysate (TVPH) was 60℃, 0.5% enzyme (w/w) and 4-hour incubation time. TVPH were further processed to tuna viscera flavor enhancer (TVFE) with Maillard reaction. The Maillard reactions of TVFE were conducted with or without supplements such as xylose, yeast extract and methionine. The Maillard volatile components were analyzed with gas chromatography-mass spectrometry. Sixteen volatiles such as 2-methylpropanal, methylpyrazine, 2,5-dimethylpyrazine, dimethyl disulfide and 2-acetylthaizone were newly formed via Maillard reaction and the similarity of volatile contents from TVPH and TVFE were virtualized using Pearson's correlation integrated with heat-map and principal component analysis. To virtualize aromagram of TVPH and TVFE, odor activity value and odor impact spectrum (OIS) techniques were applied. According to OIS results, 3-methylbutanal, 2-methylbutanal, 1-octen-3-ol 2,5-dimethylpyrazine, methional and dimethyl trisulfide were the potent odorants contributed to the meaty, creamy, and toasted aroma in TVFE.

• 콘크리트학회논문집
• /
• 제20권5호
• /
• pp.543-548
• /
• 2008

프리캐스트 제품은 소요의 강도를 단기간에 얻기 위하여 일반적으로 상압 증기양생을 실시하며, 칼슘-실리케이트의 수열합성반응을 이용할 경우 1차 양생 이후에 오토클레이브 양생이라는 2차 양생도 실시하고 있다. 여기에서 제품의 강도발현에 커다란 영향을 미치는 양생 방법의 경우, 2차 양생 방법에 대한 연구는 각종 연구로 부터 수열반응에 적합한 조건이 구명되는 등 많은 연구가 수행되었으나, 1차 양생 방법에 대한 검토는 아직 미비한 실정이며 생산업체별로 양생 방식을 달리하여 제품을 생산하고 있어 제품의 소요강도 획득에 문제점을 가지고 있다. 이에 본 연구에서는 수열합성 경화체에 있어서 보다 높은 강도를 얻기 위한 1차 양생 방법에 대한 자료를 얻고자 실험적 연구를 수행하였다. 즉 수열합성 경화체에 있어서 1차 양생 방법을 건식과 건/습식 그리고 습식으로 실시한 후에 각각의 시험체에 대하여 수화특성을 알아보기 위하여 SEM, XRD, DT-TGA 및 porosimeter 시험을 실시하였으며, 강도 특성을 알아보기 위하여 압축강도 시험을 실시하였다. 측정 결과, 1차, 2차 양생 후 각 양생조건에 따른 시험체의 압축강도는 건/습식 양생조건이 강도발현에 유리한 것으로 나타났으며, 그 차이는 크지 않은 것을 알 수 있었다. 수화도 분석을 위한 SEM, XRD 및 DT-TGA의 측정 결과, 건/습식 양생조건의 경우가 건식과 습식 양생조건에 비해 가장 많이 수화가 진행된 것을 알 수 있었고, porosimeter의 측정 결과에 있어서도 건/습식 양생조건이 강도특성에 유리한 공극특성을 갖는 것으로 나타났다.