• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.677-684
• /
• 1988

Titania powders were obtained from the various hydrolysis condition the variation of Alkoxide, water/Alcohol, REaction, Temp., reaction time and solvent system were investigated. In this result, spherical monodisperesed titania gel powders(≒0.7${\mu}{\textrm}{m}$) were obtained using EtOH(as solvent), and this method had rapid reaction time compare with iso-PrOH(as solvent).

• Korean Institute of Interior Design Journal
• /
• v.20 no.2
• /
• pp.64-71
• /
• 2011

There are a method to analyze reactions or psychological condition and a method to observe visitor's behavioral reaction as methods to measure and evaluate humans' recognition behavior reaction of humans. The measure of the eye movement as a method to living body's reaction and psychological condition has an advantage to measure the information acceptance reaction of view recognition of the stimulus of view composition factors which has been used since a long time ago in other research areas, but almost not studies have been made on the exhibition views in museums. Therefore, on the premise of such recognition, this study aimed at obtaining various types of information through vision angles of visitor in exhibition space of an museum and judging space information, at measuring the condition of information acceptance through attention experiments and observation investigation of and finding out the disposition and characteristics so as to verify the relationship between the exhibition space and exhibition Method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.37-40
• /
• 2007

Diesel autothermal reforming(ATR) is an effective method for hydrogen production. But, diesel ATR has several problems such as the sulfur poisoning of catalyst and carbon deposition during reforming reactor. Especially, carbon deposition is a severe problem, which causes rapid performance degradation, in the reforming reaction. Ethylene among the reformate gas is a carbon precursor. Effective decomposition of ethylene is an important issue. In this paper, we investigated the carbon deposition from ethylene in the reforming reaction for proper reaction condition of diesel ATR. We achieved relatively high performance of diesel ATR under $H_{2}O/C=0.8$, $O_{2}/C=3$ condition that was based on the experiment of ethylene reforming reaction.

• Journal of the Korean Ceramic Society
• /
• v.32 no.6
• /
• pp.735-747
• /
• 1995

The synthesis of clay mineral through the hydrothermal reaction of the anorthite, which is distributed in San Chung-District of Korea and called as the ground rock for halloysite-kaolin, has been investigated. It was observed that this anorthite sample was easily converted into clay mineral with 0.5 wt% HCl solution at a temperature below 20$0^{\circ}C$ under a pressure about 15 atm. The conversion reaction was promoted by adding aluminum chloride under the condition concerned. Aluminum chloride was considered to supply the insufficient aluminum ion during the conversion reaction and to reprepare the acid solution-condition by adding the HCl-component as a by-product. According to the electron micrographs, it was confirmed that fine tubular or needle-shaped halloysite-kaolin minerals with the crystal length shorter than about 1.1${\mu}{\textrm}{m}$ could be obtained by the hydrothermal reaction for 5 days under those conditions.

• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.253-258
• /
• 1984

This paper deals with the reaction-bonded silicon nitride I terms of its microstructural development during nitrida-tion. Silicon powder compacts were reacted with nitrogen at 1185$^{\circ}C$ and 13$65^{\circ}C$ according to the nitriding schedule. Microstructures of nitrided specimens were examined by means of optical and scanning electron microscope to discuss the nitridation or microstructural development at initial and intermediat stage of nitridation. Reaction products were also analysed by X-ray diffraction method at each stage of nitridation. The results indicate that ho-mogeneous and uniform microstructure with find porosity can be obtained only under the reaction condition. such as slow and relatively constant reaction rate with time.

• Journal of Environmental Science International
• /
• v.6 no.4
• /
• pp.351-357
• /
• 1997

In the Atmosphere under the various physical and chemical condition different chemical reactions occur and there are a number of air pollutants which are generated by photochemical reaction by absorbing solar energy. Therefor various testing simulation was done as foundation work to develop the numerical model for the prediction of concentration of air pollutants. It was shown change of msjor air pollutants concentration In according to variation of photodissociation speed constant, Kl and Initial condition of air pollutants concentration which plays major role In photochemical reaction. The photochemical reaction model which was used In this study Is found to be useful for understanding relationship among the concentration of reacting air pollutants and the prediction of concentration of air pollutants in urban atmosphere.

• Journal of Korean Society for Atmospheric Environment
• /
• v.6 no.1
• /
• pp.57-72
• /
• 1990

The oxidation of carbon monoxide on a catalyst, $LaSrNiCoO_3$ was investigatigated with a plug flow system. Kinetic quantities such as reaction-rate, reaction order and Arhenius-parameters at various reactor temperature from 200$^\circ$C to 300$^\circ$C were determined. Also, the optimum condition for the oxidation of carbon monoxide with this catalyst was determined and are as follows. Partial pressure of oxigen ; 428mmHg Partial pressure of carbon monoxide ; 332mmHg Mixed moral ratio of oxigen and Carbon monoxide ; 1.3 : 1 Total gas flow ; 224ml/min Reaction temperature ; 340$^\circ$C The reaction kinetic equation at the optimum condition, temperature range from 200$^\circ$C to 340$^\circ$C, are as follow. $$ $v = Ae^{6.5Kcal/RT} [CO]^{0.93 \sim 0.98} [O_2]^{0.42 \sim 0.50}$ $$ In addition to this, numerical calculation were performed to evaluate the mass and heat transfer effect on this system.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.853-858
• /
• 1999

To investigate the effect of H2 flow rate and TMS[Si(CH3)4] concentration on synthesizing ultrafine ${\beta}$-SiC powder by vapor phase reaction the experiment was performed at 1100$^{\circ}C$ of the reaction temperature under the condition of 200-2000 cc/min of H2 gas flow rate and 1-10% of TMS concentration respectively. The shape of ${\beta}$-SiC particles synthesized was spherical and the size of particles decreased and the distribution of particles was more uniform with increasing H2 gas flow rate. In this case Si powders were coexisted with ${\beta}$-SiC Pure and ultrafine ${\beta}$-SiC powders without Si were obtained under the condition of above 2% of TMS concentration and below 1500 cc/min of H2 gas flow rate.

• Archives of Pharmacal Research
• /
• v.26 no.9
• /
• pp.667-678
• /
• 2003

We examined the effect of p-substituents in p-substituted cinnamyl methyl ethers and 1-(p-substituted phenyl)allyl methyl ethers with CSI, and confirmed that the CSI reaction of allyl ethers (p-substituted ethers) is a competitive reaction of $S_Ni{\;}and{\;}S_N1$ mechanism according to the stability of the carbocation. And, the only terminal allylic amine was obtained through the migration reaction in thermodynamic reaction condition.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.141-147
• /
• 2003

Oxidized polyethylene wax is obtained by oxidation of polyethylene wax and it is composed of various chemicals, e.g., fatty acid, alcohol, ketone and ester. The application of oxidized polyethylene wax is determined by the composition of these chemical substances. In this basic study we observed the basic reaction parameters of time, temperature, oxygen concentration and catalysts on the oxidation reaction of low molecular weight polyethylene(PE wax) by analyzing the acid value, physical and chemical properties of oxidized PE wax to develop a new oxidation process. Acid values are increased with temperature increase in the rage of $150^{\circ}C^{\sim}180^{\circ}C$ but decreased beyond 190$^{\circ}C$. Acid values are also increased with oxygen concentration. As the oxidation reaction proceeds the molecular weight and softening points of oxidation products are decreased by cracking reaction, but the viscosities are increased. To observe the crystallinity of oxidation products SEM experiment was performed. To obtain a high acid-value product in a mild condition, we adopted free radical catalysts and the acid value of the product using catalyst was higher than the product obtained without catalyst in the same reaction condition. The effective initiators were dicumyl peroxide(DCPO), t-butylperoxy-2-ethyl hexanoate(HOPO) and benzoyl peroxide(BPO) having long half-life.