• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.505-513
• /
• 2010

The tribrachial flame has attracted interest as a basic structure of the flame edge. This flame structure helps understand stabilization of laminar flames and re-ignition of turbulent flames. A number of analytical and experimental studies have been carried out on the tribrachial flame. However, the effect of the variation of the flammability limits on the structure of the tribrachial flame has not been studied in detail. In this study, the effect of non-symmetric flammability limits on the flame structure was investigated by adopting a simple numerical scheme based on several laminar flame theories. A fixed velocity field was considered and boundary matching algorithm was used on the premixed branch. The variation of the diffusion branches under the non-symmetric flammability limits and heat loss was investigated. The formation and extinction of the diffusion branch behind the premixed branch were successfully described. This basic study can help understand the fundamental structure of the flame and can form the basis of subsequent detailed studies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.89-89
• /
• 2010

The atomic structure of Sb/Si(5 5 12)-$2{\times}1$ surface, deposited at room temperature (RT) and post-annealed, has been identified by scanning tunneling microscopy and the corresponding interface has been studied by synchrotron core-level photoemission spectroscopy. With 0.3-nm Sb deposition at RT and postannealing at $600^{\circ}C$, the surface has been facetted to (225)-$2{\times}1$ and (112)-$1{\times}1$, and its Si 2p has shown that all the Si 2p surface components have disappeared, while the single Sb-Si interfacial component has appeared. Such results indicate that all of surface Si atoms are replaced by Sb atoms and the charge is transferred from Si to passivating Sb-atoms at the top layer. With subsequent postannealing up to $700^{\circ}C$, the surface has been facetted to (113)-$2{\times}2$ and (335)-$4{\times}2$, still having Sb-Si interfacial component and partially re-exposed Si surface components. From the present study, the role of surfactant atom, Sb, as well as the thermal-stabilization of Sb-passivated high-index Si surface will be exposed. Especially, the key role of the Sb/Si(113)-$2{\times}2$, composed of Rebonded-Dimer-Rebonded atom 1D structures, for stabilization will be discussed.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.266-272
• /
• 2016

Transcranial magnetic stimulation devices has been used mainly for diagnostic purposes by measuring the functions of the nervous system rather than for treatment purposes, and has a problem of considerable energy fluctuations per repeated pulse. The majority of strokes are caused by ischemia and result in brain tissue damage, leading to problems of the central nervous system including hemiparesis, dysfunction of language and consciousness, and dysfunction of perception. Control is difficult and the size is large due to the difficulty of digitalizing the energy stored in a capacitor, and there are many heavy devices. In addition, there are many constraints when it is used for a range of purposes such as head and neck diagnosis, treatment and rehabilitation of nerve palsy, muscle strengthening, treatment of urinary incontinence etc. Output stabilization and minimization of the energy variation rate are required as the level of the transcranial magnetic stimulation device is dramatically improved and the demand for therapeutic purposes increases. This study developed a compact, low cost transcranial magnetic stimulation device with minimal energy variation of a high repeated pulse and output stabilization using a real time capacitor charge discharge voltage. Ischemia was induced in male SD rats by closing off the common carotid artery for 5 minutes, after which the blood was re-perfused. In the cerebrum, the number of PARP reactive cells after 24 hours significantly decreased (p < 0.05) in the TMS group compared to the GI group. As a result, TMS showed the greatest effect on necrosis-related PARP immuno-reactive cells 24 hours after ischemia, indicating necrosis inhibition, blocking of neural cell death, and protection of neural cells.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.2
• /
• pp.189-198
• /
• 2014

Purpose: The present has analyzed the correlation between the direction of lens and the amount of rotation upon soft toric contact lens fitting after classifying the corneal astigmatism. Methods: Soft toric contact lens was fitted on 114 with-the-rule astigmatic eyes with total astigmatism of at least -0.75 D in their 20s and 30s according to the fitting guideline of the manufacturer and the correlation between the astigmatic degree and the rotational direction/amount of rotation was analyzed by when keeping the eyes on the front and by changing the direction of gaze. As for re-orientation movement. The speed of lens re-orientation and total amount of lens rotation was compared and analyzed by corneal astigmatism after mis-location of lens of $45^{\circ}$ to temporal and nasal direction, respectively. Results: The positive correlations were shown between corneal astigmatism and the direction of lens rotation and between corneal astigmatism and the amount of lens rotation. Meanwhile, the amount of lens rotation was different by the direction of gaze however, there was no correlation with corneal astigmatism. The speed of lens re-orientation was fastest in the group of high astigmatic degree when the lens was mis-located to both temporal and nasal directions. Conclusions: For optimal axis stabilization of toric soft lens, it is proposed that the adjustment of fitting guideline considering corneal astigmatism is necessary since the current fitting guideline is only based on total astigmatism.

• Journal of the Korean Society for Heat Treatment
• /
• v.30 no.5
• /
• pp.215-221
• /
• 2017

The effect of austenitizing temperature on the degree of carbides re-solutionizing, mean graine size, hardness and the volume fraction of retaind austenite ($V_{\gamma}$) etc., has been studied by means of metallography, X-ray diffractometry and hardness measurement in STD 11 tool steel. As austenitizing temperature increases, the amount of alloying elements which is re-dissolved into matrix increases, resulting in increase of $V_{\gamma}$, due to the chemical stabilization of austenite. The Vickers hardness value decreases with increasing austenitizing temperature, which is attributed to grain size as well the volume fractions of $V_{\gamma}$ and carbides. Theoretical diffraction intensity of (200) ${\alpha}^{\prime}$, (211) ${\alpha}^{\prime}$ (200) ${\gamma}$ and (220) ${\gamma}$ peaks obtained by $CuK_{\alpha}$ chracteristics X-ray (${\lambda}=0.15429nm$) was calculated, and quantitative analysis of $V_{\gamma}$ could be carried out by X-ray diffraction method. The resultant value is well coincided with the value obtained by image analysis method. When the quenched specimen is tempered above $200{\sim}400^{\circ}C$ for 30 min, the transition carbides i.e., MC and $M_2C$ in the size of about 20 nm begin to precipitate at $300^{\circ}C$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.41-48
• /
• 2017

The combustion characteristics of gaseous methane-gaseous oxygen, an eco-friendly bipropellant injected by shear coaxial injector, were investigated. Flame was photographed under various combustion conditions using a DSLR camera, and the characteristics of the flame shape was quantified by image post-processing. From the view point of stabilization, the diffusion flame could be divided into anchored flame regime and blow-off regime. As the oxidizer Reynolds number ($Re_o$) increased, a probability of the formation of anchored flame increased with the length of flame. The shear coaxial injector used in this experiment was found to require a large length-to-diameter ratio of combustion chamber because it formed a relatively long flame in the injection direction due to a poor mixing depending only on the momentum diffusion of two propellant jets.

• Journal of Medicine and Life Science
• /
• v.18 no.3
• /
• pp.61-65
• /
• 2021

Although re-expansion pulmonary edema (RPE) is rare (incidence rate <1%), it is associated with a mortality rate of >20%; therefore, early diagnosis and treatment are important. We report a case of RPE following chest tube insertion in a patient with spontaneous pneumothorax. We have specifically focused on the mechanism underlying RPE and the possible etiology. An 82-year-old man with a history of chronic anemia, chronic obstructive pulmonary disease, diabetes mellitus, and hypertension was referred to the emergency department for management of recurrent right-sided pneumothorax. We performed emergency closed thoracostomy for suspected tension pneumothorax, which led to stabilization of the patient's vital signs; however, he coughed up frothy pink sputum accompanied by severe right-sided chest pain 30 min postoperatively. The patient showed new-onset right pulmonary consolidation on chest radiography, as well as desaturation, tachycardia, and tachypnea and was diagnosed with RPE. He was transferred to the intensive care unit for mechanical ventilation and supportive treatment using diuretics, ionotropic agents, and prophylactic antibiotics. RPE gradually resolved, and the patient was extubated 3 days after admission. He has not experienced recurrent pneumothorax or pulmonary disease for 4 months. We emphasize the importance of RPE prevention and that aggressive ventilator care and supportive treatment can effectively treat RPE following an accurate understanding of the underlying pathogenetic mechanisms and risk factors.

• Journal of Chest Surgery
• /
• v.47 no.4
• /
• pp.398-401
• /
• 2014

Severe tricuspid regurgitation resulting from a flail leaflet is a rare cause of neonatal cyanosis. We report a neonate with profound cyanosis and severe tricuspid regurgitation caused by a rupture of the papillary muscle supporting the anterior leaflet, without other structural heart defects. Ductal patency could not be established. The repair of the tricuspid valve was performed after initial stabilization by using extracorporeal membrane oxygenation.

• The Korean Journal of Applied Statistics
• /
• v.28 no.3
• /
• pp.511-527
• /
• 2015

For time series analysis, power transformation (especially log-transformation) is widely used for variance stabilization or normalization for stationary ARMA(p, q) model. A simple and naive back transformed forecast is obtained by taking the inverse function of expectation. However, this back transformed forecast has a bias. Under the assumption that the log-transformed data is normally distributed. The unbiased back transformed forecast can be obtained by the expectation of log-normal distribution; consequently, the property of this back transformation was studied by Granger and Newbold (1976). We investigate the sensitivity of back transformed forecasts under several different underlying distributions using simulation studies.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.3
• /
• pp.35-45
• /
• 2006

Fallow paddy areas have been increased due to the import of cheap agricultural product, and the unbalance between farming cost and rice price since 1990. In domestic, rice production control that decrease paddy field area has been introduced for the control of rice demand and supply and stabilization of rice price since 2003. Because of the desire of paddy field's owner to create benefit by using paddy for other object, fallow paddy would be continuously increased. In the other aspect, many people in the world is suffering from hunger because of the shortage of food. In case of Korea, continuous drought and flood damages will be potential concern of stable food supply. From this viewpoint, the increasing fallow paddy area needs to be protected from the devastation by weed breeding for the re-cultivation. In this study, fallow paddy managed with the shallow pools and shallows was selected fur monitoring and analyzing of water quality and plant body change. As the results, the managed fallow paddy found to be effective in the purification of water quality and the control of plant growth.