• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.93-100
• /
• 2006

Post industrial technologies have improved human standard of living, however, a host of negative environmental consequences from the unlimited industrial appetite have posed serious global challenges. Remanufacturing is an industrial manufacturing process that is to restore old products to perform like a new and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. By extending product lift cycle, remanufacturing gives us enormous opportunities for sustainable development of our society. This paper introduces needs and current state of the art in the field of remanufacturing, also analyzes old products in terms of product variety and wear conditions with an example of automobile alternators. Then, a general and a product-specified remanufacturing process will be determined with them. Finally, this paper shows systemized guidelines for remanufacturing process of the specified parts. The results could be also used as a basic information for further remanufacturing applications.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.120-129
• /
• 2009

Remanufacturing is an industrial manufacturing process. The merits of remanufacturing are to reuse old products to perform like a new product and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. This paper proposes a systemic approach for activating the domestic remanufacturing industry. The approach is based on inside and outside regulations to apply remanufacturing companies. And, we analyzed the state and problems of remanufacturing industry for automobile parts. Also 5 essential tactics and 20 detail strategies are suggested. On the basis of the approach, the domestic remanufacturing industry will carry out the cooperation for their competitions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2271-2273
• /
• 1999

The manufacturing technology of XLPE power cable ( e.g. gas curing, triple common extrusion, clean room, super-clean compound, etc.) had been developed in 1960's and the design parameter of insulation thickness for EHV XLPE power cable at present was determined in 1960's. But, the quality of XLPE power cable has been improved up to now. The re-evaluation of design parameter for insulation thickness reductions is required and so we performed weibull plotting test using model cable. This paper describes the evaluation details of the insulation characteristics according to weibull plotting test.

• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.71-77
• /
• 2011

This paper presents a production planning methodology for semiconductor manufacturing supply chain network with volatilities caused by uncertainties such as unstable demand and price. In order to take volatilities into account, we develop two approaches; 1) stochastic model with consideration of various cases and 2) deterministic model considering replanning cost, and propose efficient solution methods. Computational experiments show that the performance of the proposed method is superior to that of deterministic approach using various scenarios.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.63-65
• /
• 2005

Because of simple principal and low cost, resistance spot welding has been used a lot for joining the sheet metal in automotive manufacturing process. Welding current, welding time, and force are the most important variables in resistance spot wording. Air guns have hem still used widely. The requirement of synchronizing between robot and weld-gun has become bigger as the field has been automated. The number of servo-gun in the field is trending upward because there're advantages as like to synchronize with robot and to control the stroke path and force by programming on servo-gun system. But no cleared force control method is suggested on servo-gun system until now. In this study, we proved the feedback current of the servo-motor can be used to an excellent force measuring sensor and the force is controlled by the feedback current. And we also detected force lowering during welding cycle on the servo-gun system and solved by compensated force control.

• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.30-34
• /
• 2017

The trend of the plasma cutting and laser cutting technology of metal alloys including high strength steel, aluminum alloys for the welding structures has been studied. The high-precision plasma systems offer a denser, higher energy arc that in effect produces a sharper cutting tool and high quality cutting products. The high-quality fiber laser systems with compact design and easy set-up make it ideal for cutting in the pipeline or steel structre manufacturing. This paper covers the scientometric analysis of the high efficient cutting technology which are based on the published research works in the 'plasma and laser', and 'cutting technology' obtained from Web of Science, and deals with the details of the background data of the plasma cutting and laser cutting technology.

• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.382-385
• /
• 2009

In this study, we studied switching characteristics of germanium selenide(Ge-Se)/silver(Ag) contact formed by photodoping for use in programmable metallization cell devices. We have been investigated the switching characteristics of Ag-doped chalcogenide thin films. Changed resistance range by direction of applied voltage is about $1\;M{\Omega}$ $\sim$ hundreds of $\Omega$. The cause of these resistance change can be thought the same phenomenon such as resistance variation of PMC-RAM. The results imply that the separated Ag-ions react the atoms or defects in chalcogenide thin films.

• 한국결정성장학회지
• /
• 제26권5호
• /
• pp.209-214
• /
• 2016

Foam reaction injection molding (FRIM) is a widely used process for manufacturing polyurethane foam with complex shapes. Numerical model for polyurethane foam forming reaction during FRIM process has been intensively investigated by a number of researchers to precisely predict final shapes of polyurethane foams. In this study, we have identified a problem related with a previous theoretical model for polyurethane foam forming reaction. Thus, previous theoretical model was modified based on experimental and computational results.

• 항공우주기술
• /
• 제10권2호
• /
• pp.11-19
• /
• 2011

스마트무인기 로터 블레이드의 국산화 개발이 수행되었다. 국산화 개발은 원소재와 물성치가 가장 유사한 국내 생산 복합소재의 선정, 새로운 소재의 물성치 데이터 구축을 위한 쿠폰시험, 블레이드 단면 물성치의 재계산, 공진, 정적/피로 강도, 공탄성 안정성의 구조동역학 설계요구조건에 대한 검증 등을 포함하며, 그 결과에 대하여 기술하였다. 또한 본 논문에서는 스마트무인기 국산화 블레이드 개발과정에서 개선된 공정에 대하여 간략히 기술하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.406-410
• /
• 2005

The wind turbine, Europe and the United States are different with the standards process each other when the manufacturing company which in order to demand the standards process to a construction in the multi country with interested parties of the corresponding nation to, always the re-agreement is difficult. Korean wind turbine also detail there is not a standard, when it produces and establishes of wind turbine, the problem point occurs. It is like that investigation of international standards system it leads and when it prepares the Acoustic noise measurement of the Wind Turbine Systems of Korea, it prepares the base for industrial development wind turbine of Korea.