• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.9-16
• /
• 2017

In recent computing systems, LRU replacement policy has been widely used because it can be simply implemented and applicable to most programs. However, if the working set size of the program is bigger than the actual cache size, LRU replacement policy may occur thrashing problem. Thrashing problem means that cache blocks are consistently replaced without re-referencing in the cache. This paper proposes a new cache management scheme to solve the thrashing problem in the second-level cache. The proposed scheme measures per set reuse frequency using EAF structure to find thrashing sets. When the cache miss occurs, it tests whether the address of the missed block is stored or not. If the address of the missed block is stored, it means that the recently evicted block is re-requested, so the reuse frequency is predicted high. In this case, the corresponding counter of the set is increased. When the counter value is bigger than the threshold value, we assume that the corresponding set shows high reuse frequency. The proposed scheme assigns the set with high reuse frequency to the additional small size cache to keep the blocks in the cache for a long time. Our experimental results show that the proposed scheme improves the IPC by 3.81% on average.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.66-71
• /
• 2009

In view of mutual complementary feature of wide coverage and high data rate, the interworking between 3G cellular network and WLAN is a global trend of wireless communications. This paper introduces the analytic result of an authentication mechanism for 3GPP-WLAN seamless mobility under the USIM-based authentication test-bed. In a handover process between heterogeneous networks, authentication is the main factor of handover delay. So authentication processing time should be firstly reduced. This paper describes an USTM-based EAP-AKA test-bed implemented for handover in UMTS and WLAN interworking systems. Experimental result has shown that the fast re-authentication mechanism during handover has reduced the handover delay by about 48.6%.

• ETRI Journal
• /
• v.42 no.5
• /
• pp.748-760
• /
• 2020

MapReduce is a framework that can process huge datasets in parallel and distributed computing environments. However, a single machine failure during the runtime of MapReduce tasks can increase completion time by 50%. MapReduce handles task failures by restarting the failed task and re-computing all input data from scratch, regardless of how much data had already been processed. To solve this issue, we need the computed key-value pairs to persist in a storage system to avoid re-computing them during the restarting process. In this paper, the task failure resilience (TFR) technique is proposed, which allows the execution of a failed task to continue from the point it was interrupted without having to redo all the work. Amazon ElastiCache for Redis is used as a non-volatile cache for the key-value pairs. We measured the performance of TFR by running different Hadoop benchmarking suites. TFR was implemented using the Hadoop software framework, and the experimental results showed significant performance improvements when compared with the performance of the default Hadoop implementation.

• The Journal of Society for e-Business Studies
• /
• v.5 no.2
• /
• pp.101-112
• /
• 2000

Costs and times, resources was better decreased than former times because it had been introduced EDI(Electronic Data Interchange) system. Nevertheless, many problems has been raised as before, that is high costs and data re-using, the rapidly changing environment, etc. To solve these problems, it was attempted to introduce XML technology at traditional EDI System. From this point to view, 1 designed and implemented XML/EDI System based on Internet(Internet Messaging System) in this paper. And I selected some services as basic service among many services which is provided at XML/EDI System, that is message sending and message receiving, message retrieval. Other service of client system was composed of MapIn and MapOut module. MapIn Module is to parse the received XML Message and to store XML Data to RDB system. And MapOut module is to generate XML Message after extracting data from RDB system and to transfer XML Message to recipient. Hereby, XML/EDI System(XEDI System) provide document re-using, the various result(output) generation f3r various requirement and directly interface with DB. Therefore, This System(XEDI System) is more various and more flexible than the existing Messaging System that just provide transfer and retrieval service

• Fisheries and Aquatic Sciences
• /
• v.24 no.4
• /
• pp.139-152
• /
• 2021

The main purpose of this study is to fit catch-per-unit-effort (CPUE) data about Korea chub mackerel (Scomber japonicus) stock with a state-space production (SSP) model, and to provide stock assessment results. We chose a surplus production model for the chub mackerel data, namely annual yield and CPUE. Then we employed a state-space layer for a production model to consider two sources of variability arising from unmodelled factors (process error) and noise in the data (observation error). We implemented the model via script software ADMB-RE because it reduces the computational cost of high-dimensional integration and provides Markov Chain Monte Carlo sampling, which is required for Bayesian approaches. To stabilize the numerical optimization, we considered prior distributions for model parameters. Applying the SSP model to data collected from commercial fisheries from 1999 to 2017, we estimated model parameters and management references, as well as uncertainties for the estimates. We also applied various production models and showed parameter estimates and goodness of fit statistics to compare the model performance. This study presents two significant findings. First, we concluded that the stock has been overexploited in terms of harvest rate from 1999 to 2017. Second, we suggest a SSP model for the smallest goodness of fit statistics among several production models, especially for fitting CPUE data with fluctuations.

• Journal of Korean Society of Transportation
• /
• v.23 no.1
• /
• pp.83-92
• /
• 2005

This study if the first trial toward realizing a new methodology for vehicle re-identification based on heterogeneous sensor systems. A major interest of the author is how to effectively utilize information obtained from different sensors to derive accurate and reliable section travel times. The 'blade' sensor that is a newly developed sensor for capturing vehicle wheel information and the existing square loop sensor are employed to extract the inputs of the proposed vehicle re-identification algorithm. The fundamental idea of the algorithm developed in this study, which is so called 'anonumous vehicle re-identification,' it to match vehicle features obtained from both sensors. The results of the algorithm evaluation reveal that the proposed methodology could be successfully implemented in the field. The proposed methodology would be an invaluable tool for operating agencies in support of traffic monitoring systems and traveler information systems.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.6
• /
• pp.1157-1169
• /
• 2021

The disaster recovery refers to policies and procedures to ensure continuity of services and minimize loss of resources and finances in case of emergency situations such as natural disasters. In particular, the disaster recovery method by the cloud service provider has advantages such as management flexibility, high availability, and cost effectiveness. However, this method has a dependency on a service provider and has a structural limitation in which a user cannot be involved in personal data. In this paper, we propose a protocol using proxy re-encryption for data confidentiality by removing dependency on service providers by backing up user data using blockchain and distributed storage. The proposed method is implemented in Ethereum and IPFS environments, and presents the performance and cost required for backup and recovery operations.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.205-216
• /
• 2010

In this paper, a method of MPEG-2 Transport Stream (TS) multiplexing for Ultra HDTV (UHDTV) and its design and implementation as a SW tool is described. In practice, UHD video may be divided into several HD videos and each video is encoded in parallel. Therefore, it is necessary to synchronize and multiplex multiple bitstreams encoding each HD video for transmitting and storing UHD video. In this paper, it is assumed that 4 HD videos partitioning a UHD spatially are encoded as H.264/AVC and two 5.0 channel audios are encoded by AC-3. Therefore, 4 H.264/AVC elementary streams (ESs) and 2 AC-3 ESs is mainly considered in the TS multiplexing of UHD. For the carriage of H.264/AVC and AC-3 over MPEG-2 TS, PES packetization and TS multiplexing are designed and implemented based on the extended specification of the MPEG-2 Systems and ATSC (Digital audio compressed standard), respectively. The implemented UHD TS multiplexing tool emulates real time HW operation in the time unit corresponding to the duration of one TS packet transmission in a given TS rate. In particular, in order to satisfy the timing model, the buffers defined in the TS System Target Decoder (T-STD) are monitored and their statuses are considered in the scheduling of TS multiplexing. For UHD multiplexing, two kinds of multiplexing structures, which are UHD re-multiplexing and UHD program multiplexing, are implemented and their strength and weakness are investigated. The developed UHD TS multiplexing tool is tested and verified in terms of the syntax and semantics conformance and functionalities by using a commercial analyzer and real-time presentation tools.

• Journal of Broadcast Engineering
• /
• v.20 no.4
• /
• pp.509-520
• /
• 2015

A design for the merge mode of three dimensional High Efficiency Video Coding (3D-HEVC) is proposed in this paper. The proposed design can reduce the implementation complexity by removing the duplicated modules of the HEVC. For the extension codec, the implementation complexity is as crucial as coding efficiency, meaning if possible, extension codec needs to be easily implemented through by reusing the design of the legacy codec as-is. However, the existing merging process of 3D-HEVC had been built-in integrated in the inside of the HEVC merging process. Thus the duplicated merging process of HEVC had to be fully re-implemented in the 3D-HEVC. Consequently the implementation complexity of the extension codec was very high. The proposed 3D-HEVC merge mode is divided into following two stages; the process to reuse the HEVC modules without any modification; and the reprocessing process for newly added and modified merging modules in 3D-HEVC. By applying the proposed method, the re-implemented HEVC modules, which accounted for 51.4% of 3D-HEVC merge mode confirmed through the operational analysis of algorithm, can be eliminated, while maintaining the same coding efficiency and computational complexity.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.667-670
• /
• 2004

In this paper, we have presented the improved IF transceiver architecture and the implementation and experimental results on re-configurable transceiver based on digital IF for multiple wideband OFDM/TDD base stations for high-speed portable internet-service in which is issued Korea. The implemented IF transceiver has been designed to support multiple frequency allocations and multiple standards by only modifying the programmable software not its hardware like as the software-defined-radio concept. Also, the digital complex quadrature modulation technique has been used for the digital IF transmitter, which is able to combine multiple frequency bands in digital processing block not RF block and to reject the image frequency signals. And the bandpass sampling technique has been used for the digital IF receiver to reduce the sampling rate of ADC. This paper has shown the experiment results on the frequency response and constellation on the base-station implemented using the modified IEEE 802.16a/e physical layer channel structure based on OFDM/TDD.