• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.5
• /
• pp.238-242
• /
• 2001

In this paper, we extracted design parameters for re-entrant mode microstrip directional coupler using FE(finite element) calculations. The microstrip directional coupler suffers from a poor directivity due to effect of the inhomogeneous dielectric including both dielectric substrate and air in microstrip transmission lines. Thus, the phase velocity of even mode is not equal to that of odd mode. In order to improve the directivity of microstrip directional coupler, a novel re-entrant mode microstrip directional coupler was employed. In microstrip configuration, the high directivity can be reached by matching the even- and odd-mode effective phase velocities. Through the values of capacitance obtained from 2-dimensional FE calculations, the phase velocities for each mode and the design parameter were extracted for the proposed parallel coupled-line configuration. Based on the extracted design parameter with phase matching condition, we designed and fabricated a 30dB directional coupler at 0.85GHz. Experimental results show good performance with excellent, isolation and directivity.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.276-279
• /
• 2005

FRP Composite materials are widely applicable in the construction industries as a load-bearing structural element or a reinforcing and/or repairing materials for the concrete. In this paper, we presented the flexural behavior of FRP Re-bar and steel reinforced concrete beams and only FRP re-bars reinforced concrete beams. FRP Re-bar manufactured by different fibers but the same vinylester resin. Also, surface of FRP Re-bars is coated garnet and glass fiber by epoxy to increase the adhesive to concrete. Experimental investigation pertaining to the load-deflection and load-strain characteristics of two classfied specimens is presented and the theoretical prediction is also conducted. In the investigation, the effects of FRP Re-bar reinforcement are estimated. The experimental results arc compared with theoretical predictions. Good agreements arc observed.

• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.66-71
• /
• 2021

In this study, die turning injection(DTI) mold design for manufacturing reservoir fluid tanks used for cooling in-vehicle batteries, inverters, and motors was conducted based on multi-field CAE. Part design, performance evaluation, and mold design of the reservoir fluid tank was performed. The frequency response characteristics through modal and harmonic response analysis to satisfy the automotive performance test items for the designed part were examined. Analysis of re-melting characteristics and structural analysis of the driving part for designing the rotating die of the DTI mold were performed. Part design was possible when the natural frequency performance value of 32Hz or higher was satisfied through finite element analysis, and the temperature distribution and deformation characteristics of the part after injection molding were found through the first injection molding analysis. In addition, it can be seen that the temperature change of the primary part greatly influences the re-melting characteristics during the secondary injection. The minimum force for driving the turning die of the designed mold was calculated through structural analysis. Hydraulic system design was possible. Finally, a precise and efficient DTI mold design for the reservoir fluid tank was possible through presented multi-field CAE process.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.1
• /
• pp.44-51
• /
• 2002

The objective of this project is to improve the environment of the estuary dike on the Youngsan-River through Re-landscaping. An estuary dike of the Youngsan-River, the largest in the Orient, was constructed in 1981 and connects Mokpo City and Youngam-Gun province. Twenty years ago, when this dike was completed, this place was one of the famous tourist attractions of Korea. It symbolized the development and growth of Korea. But this dike at present is only a dreary sight as a huge concrete construction element. Therefore, a wall painting on the estuary dike was planned to improve this image. The site, an estuary dike of the Youngsan-River, is located in Mokpo City and its length is about 1,360m. The planning focus of this re-landscaping, which is a proposed improvement design through the analysis of characteristics and problems in conventional facilities, is as follows: (1) Introduction of a wall painting that is a symbol of the sea and river (by the creation of an illusion), (2) Production of the wall painting which is under consideration to create a friendly atmosphere of the circumference view and (3) Preparation of a design to establish an approach to the waterfront. By following these steps, an estuary dike can function as a tourist attractions and can be transformed in to cultural space for civilian. This project is good example of environment design that is completed with the regional residents participation through community input in the planning and initiation of a wall painting. The concept of environment design which involves the residents participation and re-landscaping in Korea has not been established up to now on. However, as this projects has proven, consideration for regional residents is a very important factor for the administrative office and planing specialist to address. In the future, it will have a direct influence on the development of design planning. If the establishment of space that can be accepted by residents with love, affection and self-confidence is possible, environment design in which residents participate actively, can be realized.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.1
• /
• pp.48-55
• /
• 2005

Mobility of an indoor wheeled robot is affected by adhesion force that is related to various floor conditions. When the adhesion force between driving wheels and floor decreases suddenly, the robot begins slip. In order to overcome this slip problem, optimal slip velocity must be decided for stable movement of wheeled robot. First of all, this paper shows that conventional PI control can not be applied to a wheeled robot of the light weight. Secondly, proposed fuzzy logic is applied to the Takagi-Sugeno model for the configuration of fuzzy sets. For the design of Takagi-Sugeno model and fuzzy rule, proposed algorithm uses FCM(Fuzzy c-mean clustering method) algorithm. In additionally, this algorithm adjusts the driving torque for restraining re-slip. The proposed fuzzy logic controller(FLC) is pretty useful with prevention of the slip phenomena for the controller performance in the re-adhesion control strategy, These procedures are implemented using a Pioneer 2-DXE wheeled robot parameter.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.111-118
• /
• 2000

The design of reference trajectory with respect to drag acceleration is necessary to decelerate from hypersonic speed safely after atmosphere re-entry of space vehicle. The re-entry guidance design involves trajectory optimization, generation of a reference drag acceleration profile with the satisfaction of 6 trajectory constraints during the re-entry flight. This reference drag acceleration profile can be considered as the reference trajectory. The cost function is composed of the accumulated total heating on vehicle due to the reduction of weight. And a regularization is needed to prevent optimal drag profile from varying too fast and achieve realized trajectory. This paper shows the relations between velocity, drag acceleration and altitude in drag acceleration profile, and how to determine the reference trajectory.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.9-12
• /
• 2004

Coupling beams subject to cyclic loads exhibit different behavioral characteristics and energy dissipation capacity varying with re-bar layouts. In the present study, nonlinear analysis method was developed using analogous truss model. Using the numerical method, parametric studies were performed to investigate the behavioral characteristics and the energy dissipation mechanism of coupling beams with various re-bar layouts subject to cyclic loading. Based on the investigation, a simple and practical method for evaluating the energy dissipation capacity of coupling beams was developed and verified by experiments. The proposed method accurately predicted the dissipated energy during cyclic loading addressing design parameters such as re-bar layouts, re-bar ratio, and deformation. The proposed method can be easily applied to nonlinear static and dynamic methods for seismic analysis and design.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.46-49
• /
• 2008

This research does Complexity form, Interior epidermis cell re-organization, Object discovery that have correct numerical value concept by purpose. Research applied by Grid re-organization in form generation, Parameter variation of cell unit (morphor, tweener), Symbol, pattern of variation, self-organization cell substitution order. Representation through 3d digital modeler of polygon, Nurbs and street-sheet program(x,y,z coordinates & Network way of points) etc. of main work. Investigator specified numbers of U profiles*30, V point-20 that is 600 Paramaters individual in volume, and define circle radius of lighting in object, Projection size variously and tried difference. Transposition cell to point and Heightened brightness of color using pointillism of painting. Led lighting cell object is expressed being decoded by digital code.

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.4
• /
• pp.25-30
• /
• 2014

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.10a
• /
• pp.58.1-58
• /
• 2001