• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.327-330
• /
• 2006

This paper represents the numerical analysis on effects of radius ratio in a concentric annulus with a rotating inner cylinder. The numerical model consisted of two cylinder which inner cylinder is rotating and outer cylinder is fix, and the axial direction is used the cyclic condition because of the length for axial direction is assumed infinite. The diameter of inner cylinder is assumed 86.8mm, the numerical parameters are angular velocity and radius ratio. Also, the whole walls of numerical model have no-slip and the working fluid is used water at $20^{\circ}C$. The numerical analysis is assumed the transient state to observe the flow variations by time and the 3-D cylindrical coordinate system. The calculation grid adopted a non-constant grid for dense arrangement near the wall side of cylinder, the standard $k-{\omega}$ high Reynolds number model to consider the effect of turbulence flow and wall, the fully implicit method for time term and the quick scheme for momentum equation. The numerical method is compared with the experimental results by Wereley and Lueptow, and the results are very good agreement. As the results, TVF isn't appeared when Re is small because of the initial flow instability is disappear by effect of the centrifugal force and viscosity. The vortex size is from 0.8 to 1.1 for TVF at various $\eta$, and the traveling distance for wavy vortex have the critical traveling distance for each case.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.799-804
• /
• 2007

액체추진제 추력기 연소실의 인젝터로부터 발생하는 분무 거동을 파악하기 위하여 광학계측 기법을 사용한다. 실험에 사용된 인젝터는 지름이 0.406 mm이며 중심축으로부터 30 의 경사각을 이루는 8 개의 노즐 구멍으로 구성된다. 분무생성의 초기조건과 분무발달에 따른 미립화 과정을 분석하기 위해, 이중모드 위상도플러속도계(DPDA)로 측정된 액적의 속도 및 입경 등의 변이 거동을 제시하고 Nd:Yag 레이저평면광에 의해 획득된 순간평면이미지와 함께 고찰한다. 분무액적의 초기 분사속도에 근거한 Re 수와 We 수 등의 무차원 변수를 도출하여 인젝터 발생 분무의 미립화 및 난류성질 등에 대한 분무유동 양식의 범주를 결정한다. 이러한 분무분열에 대한 정성적, 정량적 결과는 향후 새로운 추력기 개발에 확실한 설계 기반을 제공할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.687-690
• /
• 2002

Multimode boundary-layer transition on a NACA0012 airfoil is experimentally investigated under periodically passing wakes and the moderate level of free-stream turbulence. The periodic wakes are generated by rotating circular cylinders clockwise or counterclockwise around the airfoil. The free-stream turbulence is produced by a grid upstream of the rotating cylinder, and its intensity(Tu) at the leading edge of the airfoil is $0.5\;or\;3.5\;{\%}$. The Reynolds number ($Re_c$) based on chord length (C) of the alrfoil is $2.0{\times}10^5$, and Strouhal number ($St_c$) of the passing wake is about 0.7. Time- and phase-averaged streamwise mean velocities and turbulence fluctuations are measured with a single hot-wire probe, and especially, the corresponding wall skin friction is evaluated using a computational Preston tube method. The wake-passing orientation changes pressure distribution on the airfoil in a different manner irrespective of the free-stream turbulence. Regardless of free-stream turbulence level, turbulent patches for the receding wakes propagate more rapidly than those for the approaching wake because adverse pressure gradient becomes larger. The patch under the high free-stream turbulence ($Tu=3.5{\%}$) grows more greatly in laminar-like regions compared with that under the low background turbulence ($Tu=0.5{\%}$) in laminar regions. The former, however, does not greatly change the original turbulence level in the very near-wall region while the latter does it. At further downstream, the former interacts vigorously with high environmental turbulence inside the pre-existing transitional boundary layer and gradually lose his identification, whereas the latter keep growing in the laminar boundary layer. The calmed region is more clearly observed under the lower free-stream turbulence level and for the receding wakes. The calmed region delays the breakdown further downstream and stabilizes more the boundary layer.

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.505-513
• /
• 2006

The pressure drop characteristics in a rotating two-pass duct with rib turbulators are investigated in the present study. Three ducts of different aspect ratios (W/H=0.5, 1.0 and 2.0) are employed with a fixed hydraulic diameter ($D_h$) of 26.7 mm. $90^{\circ}$-rib turbulators with $1.5mm{\times}1.5mm$ cross-section are attached on the leading and trailing surfaces. The pitch-to-rib height ratio (p/e) is 1.0. The distance between the tip of the divider and the outer wall of the duct is 1.0 W. The thickness of divider wall is 6.0 mm o. 0.225 $D_h$. The Reynolds number (Re) based on the hydraulic diameter is kept constant at 10,000 and the .elation number (Ro) is varied from 0.0 to 0.2. As duct aspect ratio increases, high friction factor ratios show in overall regions. The reason is that the rib height-to-duct height ratio (e/H) increases, but the divider wall thickness-to-duct width ($t_d/W$) decreases. The rotation of duct produces pressure drop discrepancy between the leading and trailing surfaces. However, the pressure drop discrepancy of the high duct aspect ratio (AR=2.0) is smaller than that of the low duct aspect ratio (AR=0.5) due to the decrement of duct hight (H).

• 대한기계학회논문집B
• /
• 제25권9호
• /
• pp.1183-1192
• /
• 2001

The numerical simulation has been conducted for the investigation of flow and heat transfer characteristics of an oblique impingement jet injected to a flat plate. The finite volume method was used to discretize the governing equations based on the non-orthogonal coordinate with non-staggered variable arrangement. The $textsc{k}$-$\varepsilon$-ν(sup)'2 turbulence model was employed to consider the consider the anisotropic flow characteristics generated by the impingement jet flow. The predicted results were compared with the experimental data and those of the standard $textsc{k}$-$\varepsilon$ turbulence model. The results of the $textsc{k}$-$\varepsilon$-ν(sup)'2 model showed better agreement with the experimental data than those of the standard $textsc{k}$-$\varepsilon$ model. In order to get the optimum condition, the flow and temperature fields were calculated with a variation of inclined angle($\alpha$=30$^{\circ}$~90$^{\circ}$) and the distance between the jet exit and impingement plate-to-diameter (L/D=4~10) at a fixed Reynolds number(Re=20,000). For a small L/D, the near-peak Nusselt numbers were not significantly effected by the inclined angle. The near-peak Nusselt numbers were not significantly affected by the L/D in the case of a large $\alpha$. The overall shape of the local Nusselt numbers was influenced by both the jet orifice-to-plate spacing and the jet angle.

• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.475-484
• /
• 2001

The purpose of this study is to investigate the heat transfer augmentation using the perforated plate placed in front of a target plate in an axisymmetric impinging air jet system. The new liquid crystal technique using neural networks with median filtering is used to determine the Nusselt number distributions on the target surface. The experiments were made for the jet Reynolds number (Re) 23,000. The effects of the pitch-to-diameter (p/d1) from 1.5 to 2.5 in the perforated plate, the hole diameter on perforated plate (d1) from 4㎜ to 12㎜, the perforated plate to target surface distance (z/d1) from 1 to 3, and the nozzle-to-target surface distance (L/d) from 2 to 10 on the heat transfer characteristics were experimentally investigated. It was found that when the perforated plate was located between the nozzle exit and the target plate, the average heat transfer rate at the stagnation region corresponding to r/d$\leq$1.0 was increased up to the maximum 2.3 times compared to the case without the perforated plate.

• 한국미생물·생명공학회지
• /
• 제20권4호
• /
• pp.445-450
• /
• 1992

동물세포 배양기에서 silicone tube를 oxygenator로 이용하여 산소전달 정도를 조사하였다. Silicone tube를 이용할 때 표면통기에 비해 산소전달 상수 $k_{\iota}a$는 약 30배 이상 증가하였다. 통기속도와 교반소도가 증가할 수록 $k_{\iota}a$값도 증가하지만 교반속도가 훨씬 효과적이었고, 물질전달에 관한 무차원 상수 tubing Sherwood number(Sh)와 유체 흐름에 관한상수 impeller Reynolds number(Re)는 log-log 좌표에서 직선관계가 있었고 기울기는 tube 길이에 관계없이 0.26이었다. Tube 길이는 2m가 적당하였고 impeller는 pitched blade type이 효과적이었다.5%serum이 첨가된 medium에서는 $k_{\iota}a$가 40%로 감소하여Tekl. HepG2를 이용한 실제 동물세포 배양에서는 전형적인 세포농도인 4~$6{\times}10^6$ cells/m$\ell$ce를 얻을 수 있었다.

• Wind and Structures
• /
• 제30권4호
• /
• pp.367-378
• /
• 2020

Two-dimensional Delayed Detached Eddy Simulation (DDES) was carried out to investigate the uniform flow over a twin-box bridge deck (TBBD) with various gap ratios of L/C=5.1%, 12.8%, 25.6%, 38.5%, 73.3% and 108.2% (L: the gap-width between two girders, C: the chord length of a single girder) at Reynolds number, Re=4×104. The aerodynamic coefficients of the prototype deck with gap ratio of 73.3% obtained from the present simulation were compared with the previous experimental and numerical data for different attack angles to validate the present numerical method. Particular attention is devoted to the fluctuating pressure distribution and forces, shear layer reattachment position, wake velocity and flow pattern in order to understand the effects of gap ratio on dynamic flow interaction with the twin-box bridge deck. The flow structure is sensitive to the gap, thus a change in L/C thus leads to single-side shedding regime at L/C≤25.6%, and co-shedding regime at L/C≥35.8% distinguished by drastic changes in flow structure and vortex shedding. The gap-ratio-dependent Strouhal number gradually increases from 0.12 to 0.27, though the domain frequencies of vortices shedding from two girders are identical. The mean and fluctuating pressure distributions is significantly influenced by the flow pattern, and thus the fluctuating lift force on two girders increases or decreases with increasing of L/C in the single-side shedding and co-shedding regime, respectively. In addition, the flow mechanisms for the variation in aerodynamic performance with respect to gap ratios are discussed in detail.

• 설비공학논문집
• /
• 제23권12호
• /
• pp.805-814
• /
• 2011

In the present study, the detailed flow structure and heat transfer characteristics in the newly-designed heat transfer surface geometry were investigated. The surface geometry proposed in the present study is a traditional dimple structure combining with a protrusion inside the dimple, which is named a protrusion-in-dimple in this study. The basic idea underlying the present surface geometry is to enhance the flow mixing and the corresponding heat transfer in the flow re-circulating region generated by a conventional dimple cavity. The present study was performed by the direct numerical simulation at a Reynolds number of 2800 based on mean velocity and channel height and Prandtl number of 0.71. Three different protrusion heights for protrusion-in-dimples were considered as the main design parameter of the present study. The calculated pressure drop and heat transfer capacity were assessed in terms of the Fanning friction factor and Colburn j factor. The overall performances estimated in terms of the volume and area goodness factor for protrusion-in-dimple cases were higher than the conventional dimple case.

• 융합정보논문지
• /
• 제9권8호
• /
• pp.155-163
• /
• 2019

수평원형관에서 나노입자인 산화알미늄과 기본유체인 물의 혼합인 나노유체에 대한 층류 혼합대류열전달현상을 유한체적법의 수치적 방법으로 규명하였다. 나노유체에 대하여 2상 혼합모델을 적용하였으며, 나노입자의 물성은 온도와 체적농도의 함수를 사용하였다. 수치해석에 적용한 모든 모델의 타당성 검증을 위하여 Kim등의 실험결과와 비교하였으며 좋은 결과를 얻었다. 벽면을 일정한 열유속으로 가열하므로 나노유체는 벽면부근에서 형성된 부력에 의하여 2차유동이 생성된다. Richardson수와 나노입자의 농도가 증가할수록 강한 2차유동이 형성되어 열전달을 향상시키게 된다. 또한 Richardson수와 나노입자의 농도가 증가하면 대류열전달계수와 전단응력도 증가한다. 이런 연구들은 열교환기의 성능향상을 위하여 나노유체를 적용하는데 기본자료로 활용이 가능하다. 이번 연구를 기반으로 향후 2중관형열교환기등 다양한 열교환기에 적용할 예정이다.