• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2002년도 하계염색가공기술 세미나
• /
• pp.117-123
• /
• 2002

텐셀(tencel)은 영국의 섬유회사인 ACORDIS사가 생산하는 고급 천연소재의 Brand 이름으로 종래의 Rayon의 문제점을 개선한 차세대 섬유라는 것은 주지의 사실이다. 텐셀은 엄격한 기준을 거친 양질의 목재펄프에서 천연 셀룰로즈만을 채취해 100% 천연소재로 제조과정에서 유독 물질을 전혀 배출하지 않고 자연 속으로 완벽하게 생분해되는 환경 친화적인 소재이나 그동안 소재홍보에만 주력을 하여 염색가공 기술적인 측면은 진전이 없어 피브릴화로 일어나는 여러가지 품질상의 문제점을 갖고 있었다. (중략)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1577-1578
• /
• 1997

We have studied the effect of the rubbing fabric for liquid crystal alignment and pretilt angle generation in nematic liquid crystals (NLC), 4-cyano-4-n-penthylbiphenyl (5CB), on rubbed polyimide (PI) surfaces. The pretilt angle of 5CB for nylon and rayon fabric is larger than that of cotton fabric in weak rubbing on rubbed PI surfaces. We conclude that the pretilt angle of 5CB is strongly related to the rubbing fabrics on rubbed PI surfaces.

• 대한가정학회지
• /
• 제37권11호
• /
• pp.157-165
• /
• 1999

This study was carried out to examine the effect of clothing materials and multi-layered textiles on thermal resistance value. Cotton, polyester, wool, silk, rayon and acetate were selected for the specimens. Thermal resistance value was tested with 2 kinds of methods(thermo labo II and BK type tester). The results were as follows; 1. The effects of clothing materials for thermal resistance value were decreased by adding layers. 2. When the fabrics are measured with multiple layers, the fabric of the lowest thermal resistance value at single layer was showed the highest increasing tendency for all test methods.

• 한국의상디자인학회지
• /
• 제18권2호
• /
• pp.177-190
• /
• 2016

On-line consumer reviews are good references for consumers to evaluate and buy apparel products. The objective of this study is to facilitate communication about performance textiles between consumers and merchandisers who buy and sell apparel products on online. The survey was based on standardizing words used in consumer reviews written after purchase of summer knit t-shirts at internet shopping mall and evaluating the performance textiles including cellulose fibers. We collected reviews of five sorts of the clothing products including cotton/modal, tencel/polyurethane, polyester/rayon, linen, cotton and selected 1000 reviews related to textiles. For classifying each word used in the reviews by the performance textiles, they were quantified applying same standards. The results were as follow: First, the standard for consumer to consider importantly was tactile sensation, appearance, pilling, thickness, dimensional stability in washing. Second, the important category of performance textiles was healthy-comfort and psychological-comfort. Third, there were difference performance textiles for consumer to recognize, e.g. cotton/modal was important to air-permeability, tencel/polyurethane was noticed about tactile sensation, polyester/rayon was perceived about pilling unlike other things, linen had a problem of clothing care-convenience, then cotton was familiar fiber to important for appearance. The last, consumers usually focused on writing the most positive or negative online reviews. Although not familiar with professional terminologies, consumers are sensitive to physical properties of textiles. Therefore, standardizing and evaluating performance textiles are expected to improve satisfaction as providing objective information to consumers considering in buying apparel products at online shopping mall and increase in revenue to manufacturer.

• 대한가정학회지
• /
• 제45권10호
• /
• pp.73-81
• /
• 2007

The purpose of this study was to increase the ultraviolet-light (UV)-cut ability of cellulose fabrics (cotton, ramie, and rayon) dyed with safflower yellow colorants. For this purpose, samples treated with UV-cut agent and tannic-acid were compared with the untreated samples after UV exposure in terms of K/S value, color changes(${\Delta}E$), SEM, and strength retention. The K/S value rapidly decreased after 28 days exposure, whereas the K/S value of the samples treated with both UV-cut agent and tannic-acid decreased to less than that of the untreated samples. In color changes, $L^*$ increased while $a^*$ and $b^*$ decreased, indicating less red and yellow character in color. This induced a change in the hue, value and chroma values. However the color change(${\Delta}E$) of the samples treated with both UV-cut agent and tannic-acid was less than that of the untreated samples. Scanning electron microscopy (SEM) pictures showed a severe degradation by exposure in all samples. Tensile strength rapidly decreased after 28 days for cotton and rayon, and after 21 days for ramie. However, the strength retention of the samples treated with UV-cut agent and tannic-acid was higher than that of the untreated samples.

• 한국의류산업학회지
• /
• 제2권4호
• /
• pp.331-338
• /
• 2000

To study on the actual condition of care label attached to clothing and consumers' perception, 250 summer clothes sold at department store-blouse, trousers, one-piece dress, knit cardigan and skirt-were investigated during July 2000. In addition, a questionnaire was administered to 192 women in Taegu during August. The fiber contents of surveyed clothes were polyester 100% & polyester blend (26%), rayon 100% & rayon blend (18%), cotton 100% & cotton blend (17%), wool 100% & wool blend (14%) and others. All clothes surveyed were attached care label and the signals showed on care labels were 4~6 kinds about cleaning, squeezing, drying, bleaching, and ironing methods. 92% of clothes had to be dry-cleaned and only 8% could be wet-cleaned. Considered the surveyed clothes were for summer which needs frequent washing and the clothing items, the number of clothes had to dry-cleaned were too many. The bleaching instructions were no chlorine bleach (74%), no bleaching (21%) and others. The ironing instructions were cool ironing ($80{\sim}120^{\circ}C$) with cover (24%) and warm ironing ($140{\sim}160^{\circ}C$) with cover (69%) primarily. The drying instructions was dry on a hanger in the shade (54%) and 38% had no signal or incorrect signal. The properties of summer clothes considered important by consumers were wrinkled hardly, hand-washable, machine-washable, needed no iron and etc. Actually most of summer clothes were hand or machine-washed. Also, the majority of respondents felt inconvenient to have to dry-clean summer clothes. More than 80% respondents looked over care label and fiber content label before buying clothes. However most of respondents did not followed that instructions exactly and thought care label instructions were not correct. Considered this results, the suppliers have to make efforts to attach correct and appropriate care label which furnish the correct information to consumers.

• 한국의류학회지
• /
• 제11권3호
• /
• pp.57-65
• /
• 1987

The purpose of this study was to investigate the optimum treatment [condition for the Durable press finish of viscose rayon fabrics. Three types of commercial N-methylol crosslinking agents were applied to the fabric utilizing the pad-dry-cure technique. Changes in physical properties were evaluated for the various resin and catalyst concentrations. For DMU, the effect of different catalysts, $MgCl_2$ and $NH_4Cl$, were also compared. DMU treated fabrics showed in crease recovery angle, tensile strength and tearing strength but drastic decrease in abrasion resistance. DMDHEU and MDMDHEU treated fabrics were similar in most physical properties. However, DMDHEU treated fabrics were better in crease recovery angle and stiffness, and MDMDHEU treated fabrics were better in tensile strength, tearing strength and abrasion resistance. For a given resin system, crease recovery angle, tensile strength and stiffness increased with a increase in resin concentration. Tearing strength showed very little change, while abrasion resistance was decreased significantly as the crease recovery angle was increased. For the treatment of DMU, $MgCl_2$ catalyst was much better than $NH_4Cl$ in all physical properties. When $NH_4Cl$ catalyst was used, strength reduction and discoloration were observed. As the catalyst concentration increased, crease recovery angle, stiffness were increased. Tensile strength and tearing strength were increcased than control but at high catalyst concentration, the strength were decreased and abrasion resistance was significantly lowered. DMDHEU and MDMDHEU were more sensitive to catalyst concentrations than DMU.

• 한국의류학회지
• /
• 제23권1호
• /
• pp.3-13
• /
• 1999

This study was performed for purpose of getting fundamental information requisite to wear velvet clothes that is more comfortable for the human body and also the environment. It was carried out in a human wearing test and thermal manikin test at the same time in a controlled-condition chamber. The experimental environment had a ambient temperature of 15$\pm$0.5$^{\circ}C$ with the relative humidity at 5$^{\circ}C$$\pm$5% and with air velocity at less that than 0.2m/sec. Velvet differ from common plain weaves in thermal properties because it's constructed in two parts one is ground part and the other part is pile part. In order to investigate the thermal resistance of velvet eight different combination of 4 velvet kinds and 2 lings kinds as experimental clothes. [(4 velvet kinds : Acetate cuprammoium Rayon Cotton Wool) (2 lining kinds : acetate viscose rayon)longrightarrow8 combination: Aa, Av, Ra, Rv, Ca, Cv, Wa, Wv: the simplified character] The results of this study can be summarized as follows : 1. For the regional thermal resistance the differences in eight clothes as well as differences in each part were significant. As a whole the breast part showed the highest thermal resistance and the leg part was higher than the shank part. The rank of the total thermal resistance was put at Wa>Wv>Ca>Cv>Aa>Av>Ra>Rv in this order. 2. Considered clothing microclimate microclimate temperature has a similar tendency to the total thermal resistance. It showed a significance in the differences of eight clothes and each parts. the belly part was highest in every combination. On the other hand for clothing humidity there was a significance between back and breast part only in the human wearing test. 3. It was indicated that CLO value was highly positively correlated with the clothings' weight and showed a high negative correlation with the air permeability.

• 복식문화연구
• /
• 제25권5호
• /
• pp.648-655
• /
• 2017

This study measured dyeing properties under different dyeing conditions and levels of antimicrobial activity when man-made fibers are dyed with gallnut, including rayon, tencel, tencel blended fabric, soybean fiber, and nylon non-mordanted. The dye up-take (K/S), color ($L^*a^*b^*$), and color differences (${\Delta}E$) were measured with a colorimeter, and the number of bacteria present in the dyed fabrics were determined using Staphylococcus aureus and Klebsiella pneumonia as strains. The results are as follows: First, the optimal dyeing conditions for man-made fibers dyed with gallnut are 60 minutes of dyeing time and a $80^{\circ}C$ dyeing temperature. Second, gallnut dye is most effective on soybean fiber and then, in descending order of effectiveness, on nylon, rayon, tencel, and tencel blended fabric. This means that dyeing properties of nitrogen containing fibers are excellent when using gallnut. Third, all man-made fibers are dyed brown with gallnut. This implies dyeing possibility of man-made fibers about gallnut dye, so development and supply of natural dyed goods of man-made fibers can be increased. Fourth, in all man-made fibers dyed with gallnut extract, both Staphylococcus aureus and Klebsiella pneumonia show 99.9% reduction ratios of fungistasis, which indicate antimicrobial activity. Therefore, safe, functional, man-made materials can be developed to relieve symptoms from and treat patients with skin ailments.

• 한국지역사회생활과학회지
• /
• 제17권1호
• /
• pp.79-86
• /
• 2006

This study purposes to find the best one for dyeing with artemisia in order to develop a more efficient method of dyeing with artemisia and investigates the antibiotic activities of artemisia. After dyeing cotton, rayon, silk, wool and nylon fabrics with dyebath extracted from artemisia, observation on dyeability by temperature, concentration and time has been carried out. And I took an observation on color change, color fastness to washing and color fastness to light after mordanting treatment. Also observation on the antibiotic properties of non-dyed fabrics, artemisia-dyed fabrics and artemisia-dyed fabrics with post-mordant has been performed to investigate the antibiotic activities of artemisia. And the following results have been obtained. 1. The dyeability of artemisia was better for protein fabrics such as silk or woo and amide-based synthetic fabrics like nylon than for cellulose fabrics such as cotton and rayon. 2. For all tested fabrics, the dyeability was increased as the concentration of artemisia dyebath, dyeing time and dyeing temperature was increased. Especially the dye ability for protein fabrics was most affected by the temperature, and high dyeability was obtained at high temperatures. 3. For the color fastness of artemisia-dyed fabrics with mordanting treatment, the color fastness to washing was good with grade of 4-5 while the color fastness to light ranged from grade 2 to grade 3, which requires improvement for practical use. 4. The artemisia-dyed fabrics were shown to have much higher antibiosis than the non-dyed fabrics, and the artemisia-dyed fabrics with mortanting treatment showed the following result; Cu 99.9%, Al 64% and bittern 64.7%.