• 한국자동차공학회논문집
• /
• 제17권4호
• /
• pp.108-117
• /
• 2009

Leissa claimed in his article that the Rayleigh method is not the same as the Ritz method for determining natural frequencies and its corresponding mode shapes and contended that Rayleigh's name should not be attached to the method. The present article examines the methods in viewpoint of admissible functions and its minimization process, and of the historical developments. It concludes that Leissa's assertion is relevant, although Rayleigh did apply a conceptual theory systematized from the Lagrange method, and given 38 years earlier than Ritz's 'masterly exposition of theory'.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.641-646
• /
• 2016

화석 연료의 연소 과정에서 발생하는 그을음 입자의 형상은 작은 구형입자들이 군집체를 이루고 있는 프랙탈 형상을 하고 있기에 기존 Rayleigh나 Mie 탄성 광 산란 이론으로 분석하는 것에는 한계가 있다. 본 논문에서는 Rayleigh-Debye Gans(RDG) 산란 이론을 적용하여 프랙탈 차원을 가지는 미세 입자의 형상을 효과적으로 해석할 수 있는 과정을 자세히 묘사하였다. 이소옥탄 확산 화염에서 발생하는 그을음 입자를 열 영동 채취법을 이용하여 채집한 후, 투과전자현미경을 이용하여 그을음 입자의 형상을 관찰하였다. RDG 산란 이론을 적용하여, 그을음 입자의 프랙탈 형상을 조사 하였고, 그을음 개별 입자의 직경, 입자 수밀도 및 부피 분율을 산출하였다. 이러한 결과들은 그을음의 성장 과정에서는 뚜렷한 증감 경향을 보이진 않았으나, 그을음 산화 과정에선 전부 뚜렷하게 감소하는 경향을 보였다. 본 연구에서 RDG 산란 이론을 이용하여 도출한 그을음 군칩체의 프랙탈 차원은 약 1.82로 이는 기존의 유사연구 결과와 동일하며, 화석연료의 종류에 상관없이 생성된 모든 그을음 입자에 동일한 값을 갖는 것으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.455-470
• /
• 2016

In this paper, we investigate the free vibration of axially loaded non-uniform Rayleigh cantilever beams. The Rayleigh beams account for the rotary inertia effect which is ignored in Euler-Bernoulli beam theory. Using an inverse problem approach we show, that for certain polynomial variations of the mass per unit length and the flexural stiffness, there exists a fundamental closed form solution to the fourth order governing differential equation for Rayleigh beams. The derived property variation can serve as test functions for numerical methods. For the rotating beam case, the results have been compared with those derived using the Euler-Bernoulli beam theory.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.765-773
• /
• 2017

The quadratic B-spline finite element method yields mass and stiffness matrices which are half the size of matrices obtained by the conventional finite element method. We solve the free vibration problem of a rotating Rayleigh beam using the quadratic B-spline finite element method. Rayleigh beam theory includes the rotary inertia effects in addition to the Euler-Bernoulli theory assumptions and presents a good mathematical model for rotating beams. Galerkin's approach is used to obtain the weak form which yields a system of symmetric matrices. Results obtained for the natural frequencies at different rotating speeds show an accurate match with the published results. A comparison with Euler-Bernoulli beam is done to decipher the variations in higher modes of the Rayleigh beam due to the slenderness ratio. The results are obtained for different values of non-uniform parameter ($\bar{n}$).

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.61-65
• /
• 2012

이성분 용융액의 시간의존형 응고계에서 mush 층의 대류발생을 선형 안정성 이론으로 해석하였다. 본 연구에서는 근공융물 mush 층을 다공성 블록으로 가정한 단순화된 모델에 전파이론을 적용하여 대류발생 임계조건을 구하였다. 본 연구 모델에서는 기존의 실험결과 및 mush층 위의 액체층을 포함하여 고려한 이론적 연구의 결과보다 더 높은 임계 Rayleigh 수가 얻어졌다. mush 층의 윗 경계면에 일정압력(투과)조건을 적용하는 경우가 비투과조건에 비해 임계 Rayleigh 수를 더 작게 하며 염화암모늄 수용액의 응고실험결과와 더 근접한 것으로 조사되었다.

• 한국음향학회지
• /
• 제28권3호
• /
• pp.174-186
• /
• 2009

경계면이 존재하는 해양에서의 수중 음파 전달 모델링 시 일반적으로 평평한 경계면을 가정하고 Rayleigh가 제안했던 반사계수를 이용해 반사파를 계산할 수 있다. 하지만 해수면이나 해저면과 같은 실제 해양의 경계면은 불규칙적인 거칠기를 가진다. 이러한 경계면에서의 반사 손실은 실험식이나 산란 이론에 기반한 간섭 반사 계수를 계산하여 구할 수 있다. 본 논문에서는 섭동 이론, Kirchhoff 근사법, 작은 가지 근사법과 같은 산란 이론을 이용하여 유체-유체 경계면에 대한 간섭 반사 계수를 각각 유도한다. 이를 이용하여 임의의 거칠기를 가지는 해수면과 해저면에 대한 각 산란 이론의 간섭 반사계수를 계산하며, 이 결과를 Rayleigh 반사 계수와 비교하여 경계면의 거칠기에 따른 반사 손실을 분석한다. 또한, 섭동 이론과 Kirchhoff 근사법의 결과를 일반적으로 적용 범위가 넓은 작은 기울기 근사법의 결과와 비교하여 각 이론의 유효범위에 대해 고찰한다.

• Advances in aircraft and spacecraft science
• /
• 제5권4호
• /
• pp.411-430
• /
• 2018

This computational study examines the augmentation of classic 2-D Rayleigh-$B{\acute{e}}nard$ convection by the addition of periodically-spaced transverse fins. The fins are attached to the heated base of the cavity and serve to partition the cavity into 'units' with different aspect ratios. The respective impacts upon heat transfer of the fin configuration parameters - including spacing, height, thickness and thermal conductivity - are systematically examined through numerical simulations for a range of laminar Rayleigh numbers (0 < Ra < $2{\times}10^5$) and reported in terms of an average Nusselt number. The selection of the low Rayleigh number regime is linked to likely scenarios within aerospace applications (e.g. avionics cooling) where the cavity length scale and/or gravitational acceleration is small. The net heat transfer augmentation is found to result from a combination of competing fin effects, most of which are hydrodynamic in nature. Heat transfer enhancement of up to $1.2{\times}$ that for a Rayleigh-$B{\acute{e}}nard$ cavity without fins was found to occur under favorable fin configurations. Such configurations are generally characterized by short, thin fins with half-spacings somewhat less than the convection cell diameter from classic Rayleigh-$B{\acute{e}}nard$ theory. In contrast, for unfavorable configurations, it is found that the introduction of fins can result in a significant reduction in the heat transfer performance.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.703-711
• /
• 2018

In this paper is studied the effect of considering the theory of Timoshenko in the vibration of AFG beams that support ground masses. As it is known, Timoshenko theory takes into account the shear deformation and the rotational inertia, provides more accurate results in the general study of beams and is mandatory in the case of high frequencies or non-slender beams. The Rayleigh-Ritz Method is employed to obtain approximated solutions of the problem. The accuracy of the procedure is verified through results available in the literature that can be represented by the model under study. The incidence of the Timoshenko theory is analyzed for different cases of beam slenderness, variation of its cross section and compositions of its constituent material, as well as different amounts and positions of the attached masses.

• Structural Engineering and Mechanics
• /
• 제48권2호
• /
• pp.195-205
• /
• 2013

The buckling problem of linearly tapered micro-columns is investigated on the basis of modified strain gradient elasticity theory. Bernoulli-Euler beam theory is used to model the non-uniform micro column. Rayleigh-Ritz solution method is utilized to obtain the critical buckling loads of the tapered cantilever micro-columns for different taper ratios. Some comparative results for the cases of rectangular and circular cross-sections are presented in graphical and tabular form to show the differences between the results obtained by modified strain gradient elasticity theory and those achieved by modified couple stress and classical theories. From the results, it is observed that the differences between critical buckling loads achieved by classical and those predicted by non-classical theories are considerable for smaller values of the ratio of the micro-column thickness (or diameter) at its bottom end to the additional material length scale parameters and the differences also increase due to increasing of the taper ratio.

• Advances in materials Research
• /
• 제12권3호
• /
• pp.211-226
• /
• 2023

The present work is considered to study the two-dimensional problem in an orthotropic magneto-thermoelastic media and examined the effect of thermal phase-lags and GN-theories on Rayleigh waves in the light of fractional order theory with combined effect of rotation and hall current. The boundary conditions are used to derive the secular equations of Rayleigh waves. The wave properties such as phase velocity, attenuation coefficient are computed numerically. The numerical simulated results are presented graphically to show the effect of phase-lags and GN-theories on the Rayleigh wave phase velocity, attenuation coefficient, stress components and temperature change. Some particular cases are also discussed in the present investigation.