• Korean Journal of Environmental Biology
• /
• v.17 no.1
• /
• pp.11-15
• /
• 1999

To investigate the stimulating effects of the low- dose radiation, the seeds of chinese cabbages (Brassica campestris L. cv. Hanyoreum and cv. Tropic emperor) were irradiated at the dose of 0.5 Gy~20 Gy with the ${\gamma}$-ray radition. In case of ‘Hanyoreum’cultivar, there were no significant promoting effects on the germination rate except the 0.5 Gy irradiated group. The increase in seedling height and fresh weight in 8 Gy and 12 Gy irradiated groups was 20% and 40%, respectively, which suggested the stimulating effect of the low-dose radiation on the early growth. In case of‘Tropic emperor’cultivar, the germination rate of 1 Gy irradiated group increased approximately 10% and the seedling height and fresh weight of 1 Gy and 12 Gy irradiated group in the greenhouse 20% on the average, and plant height and fresh weight of 0.5 Gy and 4 Gy irradiated group in the field increased 10% and 20% on the average, respectively.

• Restorative Dentistry and Endodontics
• /
• v.38 no.3
• /
• pp.146-153
• /
• 2013

Objectives: Aluminum step wedge (ASW) equivalent radiodensity (eRD) has been used to quantify restorative material's radiodensity. The aim of this study was to evaluate the effects of image acquisition control (IAC) of a digital X-ray system on the radiodensity quantification under different exposure time settings. Materials and Methods: Three 1-mm thick restorative material samples with various opacities were prepared. Samples were radiographed alongside an ASW using one of three digital radiographic modes (linear mapping (L), nonlinear mapping (N), and nonlinear mapping and automatic exposure control activated (E)) under 3 exposure time settings (underexposure, normal-exposure, and overexposure). The ASW eRD of restorative materials, attenuation coefficients and contrasts of ASW, and the correlation coefficient of linear relationship between logarithms of gray-scale value and thicknesses of ASW were compared under 9 conditions. Results: The ASW eRD measurements of restorative materials by three digital radiographic modes were statistically different (p = 0.049) but clinically similar. The relationship between logarithms of background corrected grey scale value and thickness of ASW was highly linear but attenuation coefficients and contrasts varied significantly among 3 radiographic modes. Varying exposure times did not affect ASW eRD significantly. Conclusions: Even though different digital radiographic modes induced large variation on attenuation of coefficient and contrast of ASW, E mode improved diagnostic quality of the image significantly under the underexposure condition by improving contrasts, while maintaining ASW eRDs of restorative materials similar. Under the condition of this study, underexposure time may be acceptable clinically with digital X-ray system using automatic gain control that reduces radiation exposure for patient.

• Journal of electromagnetic engineering and science
• /
• v.16 no.3
• /
• pp.150-158
• /
• 2016

This paper reports on a study of LiNiZn-ferrite composite as a radiation absorbent material (RAM). The electromagnetic (EM) wave absorbers are composed of an EM wave absorbing material and a polymeric binder. The surface morphology, chemical composition, weight percent of the ferrite composite of the toroid sample, magnetic properties, and return loss are investigated using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and network analyzer. For preparing the absorbing sheet, chlorinated polyethylene (CPE) is used as a polymeric binder. The EM wave absorption properties of the prepared samples were studied at 4 - 8 GHz. We can confirm the effects of the thickness of the samples for absorption properties. An absorption bandwidth of more than a 10-dB return loss shifts toward a lower frequency range along with an increase in the thickness of the absorber.

• Journal of Sensor Science and Technology
• /
• v.13 no.4
• /
• pp.282-286
• /
• 2004

${\alpha}-Fe_{2}O_{3}$ films were prepared by ultrasonic spray pyrolysis (USP) on $SiO_{2}$ coated Si wafers using iron acetylacetonate as an iron precursor. The crystallographic properties and surface morphologies of the films were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. X-ray photoelectron spectroscopy (XPS) was carried out to determine the Fe oxidation states. In order to observe stability of the films to temperature, the resistance variation of the films with an ambient temperature was measured. The effects of substrate temperature on the structural and electrical properties of the ${\alpha}-Fe_{2}O_{3}$ films were studied. The films were densified from the substrate temperature of $350^{\circ}C$. The grain size of the films grown at $400^{\circ}C$ was shown to be increased abruptly comparing with that of $350^{\circ}C$. The films showed a low resistance variation between the ambient temperature of $300^{\circ}C$ and $350^{\circ}C$.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.832-835
• /
• 2007

Moisture content of normal, waxy, and high amylose com starches was adjusted to 10-35%, and irradiated in a microwave oven. The effect of microwave irradiation on the crystalline structure of starch was measured by using a differential scanning calorimetry (DSC), and X-ray diffractometry. Pasting viscosity profile was also determined by using a rapid viscoanalyzer (RVA). For all the 3 types of starches tested, the rate of temperature increase by the microwave irradiation was faster and more rapidly reached the maximum temperature of the pressure bomb ($120^{\circ}C$) when the moisture content was higher. X-ray diffraction and DSC data revealed that the microwave irradiated starch underwent partial disruption of crystalline structure. RVA studies showed that the irradiation caused significant reductions in maximal viscosity and breakdown, whereas pasting temperature was increased. Overall trends revealed that the microwave irradiation on the starch containing limited moisture content (less than 35%) provided the effects similar to the heat moisture treatment. These effects became more significant when the moisture content was higher. Compared to waxy com starch, normal, and high amylose com starches appeared to be more susceptible to the microwave irradiation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.7
• /
• pp.564-569
• /
• 2002

Heteroepitaxial GaN films were grown on sapphire substrates in order to study the effects of the buffer layer's surface roughness and thermal treatment on the epitaxial layer's quality. For this, GaN buffer layers were grown at $550^{\circ}C$ with various TMGa flow rates and durations of growth, and annealed at $1010^{\circ}C$ for 3 min after the temperature was raised by 23 ~ $92^{\circ}C/min$, and then GaN epitaxial layers were grown at $1000^{\circ}C$. It has been found that the buffer layer's surface roughness and the thermal treatment condition are critical factors on the quality of the epitaxial layer. When a buffer layer was frown with a TMGa flow rate of $24\mu mole/min$ for 30 sec, the surface roughness of the buffer lather was minimum and when the thermal ramping rate was $30.6^{\circ}C/min$ on this layer, the successively grown epitaxial layer's crystalline and optical qualities were optimized with a specular morphology. The minimum full width at half maximum(FWHM) of GaN(0002) x-ray diffraction peak and that of near-band-edge(NBE) peak from a room temperature photoluminescence (PL) were 5 arcmin and 9 nm, respectively.

• Carbon letters
• /
• v.10 no.4
• /
• pp.314-319
• /
• 2009

The surface treatment effects of reinforcement filler were investigated based on the dynamic mechanical properties of mutiwalled carbon nanotubes (MWCNTs)/epoxy composites. The as-received MWCNTs(R-MWCNTs) were chemically modified by direct oxyfluorination method to improve the dispersibility and adhesiveness with epoxy resins in composite system. In order to investigate the induced functional groups on MWCNTs during oxyfluorination, X-ray photoelectron spectroscopy was used. The thermo-mechanical property of MWCNTs/epoxy composite was also measured based on effects of oxyfluorination treatment of MWCNTs. The storage modulus of MWCNTs/epoxy composite was enhanced about 1.27 times through oxyfluorination of MWCNTs fillers at $25^{\circ}C$. The storage modulus of oxyfluorinated MWCNTs (OF73-MWCNTs) reinforced epoxy composite was much higher than that of R-MWCNTs/epoxy composite. It revealed that oxygen content led to the efficient carbon-fluorine covalent bonding during oxyfluorination. These functional groups on surface modified MWCNTs induced by oxyfluorination strikingly made an important role for the reinforced epoxy composite.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.417-424
• /
• 2004

Polycarboxylate type superplasticizers (PCA) with different graft chain (Polyethylene oxide) length were synthesized by Methoxypoly (ethyleneglycol)monomethacrylate (MPEGMAA) and methacrylic acid (MAA). The effects of PCA on the hydration of Ordinary Portland Cement (OPC) were investigated by Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) techniques. The effect of graft chain length of PCA on the hydration of OPC was different at early age, but, at long age, was similar. The ratio of relative peak intensity, (I［001］/I［101］), of Ca(OH)$_2$ compared with OPC also was reduced by PCA addition.

• BMB Reports
• /
• v.45 no.10
• /
• pp.571-576
• /
• 2012

Radiotherapy is considered to cause detrimental effects on bone tissue eventually increasing bone loss and fracture risk. However, there is a great controversy on the real effects of irradiation itself on osteoblasts, and the mechanisms by which irradiation affects osteoblast differentiation and mineralization are not completely understood. We explored how X-ray radiation influences differentiation and bone-specific gene expression in mouse calvarial osteoblasts. Irradiation at 2 Gy not only increased differentiation and mineralization of the cells, but also upregulated the expression of alkaline phosphatase, type I collagen, osteopontin, and osteocalcin at early stages of differentiation. However, irradiation at higher doses (>2 Gy) did not stimulate osteoblast differentiation, rather it suppressed DNA synthesis by the cells without a toxic effect. Additional experiments suggested that transforming growth factor-beta 1 and runt-transcription factor 2 play important roles in irradiation- stimulated bone differentiation by acting as upstream regulators of bone-specific markers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.824-832
• /
• 1998

The significant additional path loss is caused by scattering, diffraction, and attenuation of propagation. Most of the wave propagation models for rural areas mainly have considered the influence of topography but ignored the effects due to land usage. The goal of this paper is development of the field strength prediction program for Cheju which is used the contour map and the effects due to land usage. In oder to classify the propagation path and divide the environment of land, data of the terrain and the land-cover are formed into a pixel. Two-ray model is transformed into equivalent model by the predicted reflection coefficient and the slope of terrain. For non line of sight, the additional loss is determined by quantitative analysis. The result show good accord and the wave propagation model program can be applied to predicted the service region in rural area of Cheju.