• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.66-66
• /
• 2008

Most of the properties of ITO films depend on their substrate nature, deposition techniques and ITO film composition. For the display panel application, it is normally deposited on the glass substrate which has high strain point (>575 degree) and must be deposited at a temperature higher than $250^{\circ}C$ and then annealed at a temperature higher than $300^{\circ}C$ in order to high optical transmittance in the visible region, low reactivity and chemical duration. But the high strain point glass (HSPG) used as FPDs is blocking popularization of large sizes FPDs because it is more expensive than a soda lime glass (SLG). If the SLG could be used as substrate for FPDs, then diffusion of Na ion from the substrate occurs into the ITO films during annealing or heat treatment on manufacturing process and it affects the properties. Therefore proper care should be followed to minimize Na ion diffusion. In this study, we investigate the electrical, optical and structural properties of ITO films deposited on the SLG and the Asahi glass(PD200) substrate by rf magnetron sputtering using a ceramic target ($In_2O_3:SnO_2$, 90:10wt.%). These films were annealed in $N_2$ and air atmosphere at $400^{\circ}C$ for 20min, 1hr, and 2hrs. ITO films deposited on the SLG show a high electrical resistivity and structural defect as compared with those deposited on the PD200 due to the Na ion from the SLG on diffuse to the ITO film by annealing. However these properties can be improved by introducing a barrier layer of $SiO_2$ or $Al_2O_3$ between ITO film and the SLG substrate. The characteristics of films were examined by the 4-point probe, FE-SEM, UV-VIS spectrometer, and X-ray diffraction. SIMS analysis confirmed that barrier layer inhibited Na ion diffusion from the SLG.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.106-111
• /
• 2008

폴리프로필렌(polypropylene, PP)/옥수수전분(corn starch) 마스터뱃취(MB)/실리케이트 복합체를 전분 함량을 10, 20, 30, 40, 50으로 변화시키면서 실험실 규모의 brabender mixer를 이용하여 $200^{\circ}C$에서 제조하였다. 실리케이트의 함량은 5 wt%로 고정하였다. 복합체에서 전분 MB 함량 변화는 적외선분광기(FT-IR)를 이용하여 수산기의 존재여부와 피크 강도 변화로 확인하였다. PP/전분 MB/실리케이트 복합체의 열적특성을 시차주사열용량분석기(DSC) 그리고 열중량분석기(TGA)를 이용하여 관찰하였다. PP/전분 MB/실리케이트의 용융온도에는 큰 변화가 나타나지 않음을 알 수 있었고, 분해온도는 전분 MB 함량에 따라 점차적으로 감소하는 경향을 보여주었다. 복합체의 실리케이트 분산정도는 X-선 회절(XRD)과 투과전자현미경(TEM)을 이용하여 측정하였다. 복합체의 실리케이트 분산은 전분 MB의 함량에 의존하였고, 전분 MB가 20 wt% 이상 첨가되었을 때 d-spacing과 피이크 강도에 큰 변화를 보였다. 복합체의 유변학적 특성은 전분 MB의 함량에 따라 shear thinning effect와 탄성특성에 있어 증가를 나타내었다. 또한 전분 함량이 20 wt% 이상 첨가되었을 때 이들 유변학적 특성에 있어서 큰 변화를 나타내었다. 이는 $200^{\circ}C$에서 동적유변학측정기를 이용하여 확인하였다.

• 혜화의학회지
• /
• 제12권1호
• /
• pp.79-102
• /
• 2003

It has been believed that the human body can be effected by color, sound, smell, and taste - each of them is based on the original character. Out of these elements, the color can be a mediation that absorbs energy into human body and adapts it to the creatures whose life are definitely based on the solar energy. This thesis makes a study of the possibility of applying the color to the oriental medical science by researching the color psychology and therapy which are studied in the west medical science, the recognition and application of color developed from orientalism, and the opinion of color in the oriental medical science. Color therapy is one of the psychological treatment techniques that are able to recover and maintain the health with the rays of the sun rays and the color. The light and the color have its energy that may relax, harmonize, encourage, or excite a human being. This is because the wavelength and the vibration of each color will take effects to human body. The core energy of absorbing and distributing the color vibration is made in the 7 "chakras" in the body, which are the pith and marrow of bio-energy directly connected with the center of the nervous system. There are several methods in the color therapy - the treatment of solar ray, the color-bath, the water-therapy using color energy, the inducement of the solar energy into the body, the acupuncture, the therapy of crystal and jewel, and the self-suggestion dependent upon the color. The color therapy can help us to keep our balance by changing the emotion into the positive energy that will cure the disease with color. As a result, this method not only must be useful to cure physical disease, or develop into good health but also will be used in conforming itself to the mental disease. The color therapy mainly uses the eight colors, which are made by mixing Red, Yellow and Blue basic colors in the field. They are never used in the treatment, but they will go along with complementary colors. This rule is closely connected with the theory of yin and yang which lies at the root of oriental philosophy, and with the treatment principle of oriental medical science whose field is focused on the balancing the body mentally as well as physically. In the East, it is the Obangsaek - the color of blue, red, yellow, white, and black in the theory of yin and yang and the five elements that have been used in helping people having trouble with their health for a long time. In the view of the oriental medical science, these five colors attached the theory of five-elements have been very useful to the physiology, the pathology, or the diagnosis, and been applied to the medical treatment, combining themselves with a five-taste in medicinal herbs. Since the study of color and human physiology has been made in some different interest and fields these days, it goes to prove that the different function of color we couldn't have got before becomes very useful to the medical science. The color must be worth researching the diversity for applying itself to the oriental medical science.

• 치과방사선
• /
• 제26권2호
• /
• pp.133-145
• /
• 1996

Aspirating or swallowing foreign bodies is a common occurrence. If they are wholly or partly radiopaque, their localization in and progress through the gastrointestinal tract can be more effective. Of the dental origin foreign materials swallowed, the most common things are fragments of anterior maxillary partial denture. But the radiopacity of denture base resins is not sufficient to determine the location of the objects. The purpose of this study was to develop a radiopaque dental acrylic resin, which has clinically detectible radiopacity with minimal change of mechanical properties and color. The radiopacity, color change(CIE 6..E) and microhardness of acrylic resins were determined after mixing barium sulfate or iodide compound. Thermocycling course was conducted to determine the change of characteristic of resins after using for a long time in the mouth. Five or ten percent of barium sulfate to total weight of cured material was mixed with heat curing dental acrylic resin or chemically curing orthodontic resin. In the case of iodide compound, the mixing ratio was two or three percent. After mixing the high radiopaque materials, resin was cured to 20×20×2 mm plate, polished with #600 sand paper and finally polished with Microcloth(Buehler). The specimens were thermocycled in 5 and 55 t distilled water for 2,000 times, and the measurement of radiopacity, color and Vickers hardness was repeated every 500 times thcrmocycling. The radiopacity of specimens on the X -ray films was measured with densitometer(X-rite). The color change was detennined with differential colorimeter(Model TC-6FX, Tokyo Denshoku), and the Vickers hardness number was measured with microhardness tester(Mitsuzawa). The following results were obtained : 1. All the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, had combined effect on the radiopacity of the dental acrylic resins(p<0.0l). 2. The two variables, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of the dental acrylic resins(p<0.01). But the kinds of acrylic resins did not influence on the color change of mixed dental acrylic resins(p>0.05). 3. Each of the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of dental acrylic resins(p<0.0l). 4. The high radiopaque materials used in this study did not yield clinically usable radiopacity, and the color change was great after mixing those materials.

• 한국자기학회지
• /
• 제9권2호
• /
• pp.78-84
• /
• 1999

고온연소합성법(self-propagating high temperature synthesis)을 이용하여(Ni, Zn)Fe2O4 분말을 제조하고 초기 분말의 크기와 산소압에 따른 생성물의 미세조직과 자기적 특성을 조사하였다. (Ni, Zn) 페라이트 분체는 다양한 입도의 Fe, Fe2O3, NiO, ZnO의 원료 분말을 n-hexane 용액에서 습식으로 spex mill을 사용하여 5분 혼합하고 12$0^{\circ}C$ 진공로에서 24시간 건조한 후 0.5~10기압의 산소압에서 고온연소합성 반응으로 제조하였다. 성형 압력이 없는 경우 평균 연소온도와 연소속도는 최대 약 125$0^{\circ}C$와 9.8mm/sec였으며 산소압과 ZnO입도가 감소하면 감소하였다. 고온연소합성된 시료는 다공질 구조를 갖고 있으며 X-선 회절 시험으로 시편들의 spinel구조를 관찰하였다. ZnO입도와 산소압이 증가하면 보자력, 최대자화, 잔류자화, 각형비 및 큐리 온도는 각각 13.24Oe, 43.88emu/g, 1.27emu/g, 0.0034emu/gOe, 37.8$^{\circ}C$에서 11.83Oe, 68.87emu/g, 1.23emu/g, 0.00280emu/gOe, 439.$^{\circ}C$와 7.99Oe, 75.84emu/g, 0.791emu/g, 0.001937emu/gOe, 53.8$^{\circ}C$로 변화하였다. 산소압에 따른 겉보기 활성화에너지를 고려하면 페라이트의 연소합성 반응은 ZnO입도와 산소압에 크게 의존한다.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.212-234
• /
• 1999

Dental restorative materials must have the physical properties to withstand wear and corrosion. Base metal alloys possess better mechanical properties and lower price than the gold alloys. For these reasons such alloys have largely replaced the precious metal alloys. One aspect to con-sider is the release of metal substances to oral environment. The release of elements from dental alloys is a continuing concern because the elements may have the potentially harmful biological effects on local tissues. The purpose of this study was to minimize metal release on the nonprecious metal surfaces by ion beam assisted deposition(IBAD) of titanium nitride (TiN) Ni-Cr-Be alloys with and without TiN coatings were secured in an wear test machine opposing ruby ball to determine their relative resistance to wear with loom, 200m, 300m and 400m sliding distance. And the corrosion behavior of the Ni-Cr-Be alloys with and without TiN coatings and 3 dental noble alloys have been studied. Potentiodynamic curves were used to analyse the corrosion characteristics of the alloys. The measurement of the released Ni and Cr ions was conducted by analysis of the electrolyte solution with atomic absorption spectroscopy. The results were as follows : 1. The critical sliding distance that wore down TiN coatings of $2.5{\mu}m$ thickness in this study condition was 300m. 2. Ion beam assisted deposition of TiN showed a good surface modification with respect to the properties of wear and corrosion resistance. 3. X-ray diffraction showed that the strongest peak of TiN is TiN(111) in the coatings. 4. The release of Ni and Cr ions from alloys measured by means of atomic absorption spectroscopy was reduced by ion beam assisted deposition of TiN.

• 폴리머
• /
• 제37권1호
• /
• pp.28-33
• /
• 2013

잘토프로펜은 프로피온산 유도체인 비스테로이드성 소염진통제로서 카라기난, 나이스타틴에서 유발된 급성염증에 큰 억제 효과를 가지고 있을 뿐만 아니라 급성 및 만성 염증에도 효과를 가지고 있다. 초기 방출 및 지속적인 방출을 위해서 잘토프로펜이 함유된 폴리옥살레이트(POX)와 PLGA 미립구를 각각 O/W 용매증발법으로 제조 후 각각의 미립구의 혼합비율을 달리하였다. 주사현미경, X선 회절 분석법, 시차 주사 열량계, 그리고 적외선 분광 분석기를 이용하여 잘토프로펜이 함유된 미립구의 물리화학적 성질 및 표면형태를 조사하였다. POX 미립구의 혼합비율이 증가할수록 초기 약물방출이 증가하며, PLGA 미립구의 혼합비율이 증가할수록 느린 약물방출을 보인다. 본 연구에서 초기 약물방출량이 높은 POX 미립구를 PLGA 미립구와 혼합비율을 조절함으로써 약물이 함유된 미립구의 초기방출 계수를 제어할 수 있을 것으로 사료된다.

• 한국자기학회지
• /
• 제9권1호
• /
• pp.35-40
• /
• 1999

M-type Ba 페리이트를 Ba 대신 Sr으로 치환시킨 페라이트 분말과 Fe대신 Co-Ti으로 치환시킨 육방 페라이트 분말을 각각 citrate sol-gel법과 2 MOE sol-gel법으로 합성하였다. 이들 분말들을 소결 처리 후 수소 분위기 하에서 온도를 변화시키면서 환원처리 하였다. X-선 회절을 이용한 결정구조 해석에서 105$0^{\circ}C$에서 소결 처리된 분말의 경우 단일상의 M-type 육방정 구조로 나타났다. X-선 회절실험 결과 Sr0.5Ba0.5Fe12O19과 다르게, Co-Ti 치환형 페라이트인 Sr0.7Ba0.3Fe10CoTiO19에서는 Co-Ti 치환이 환원과정을 저지시키는 효과가 있는 것으로 나타났다. 육방 페라이트에서 수소환원에 의한 포화자화 Ms값의 증가 원인을 알아보기 위하여 Mossbauer 분광실험을 실시하였다. Mossbauer 실험결과는 대부분의 $\alpha$-Fe가 4fvi자리와 12k자리로부터 발생되는 것으로 나타났으며, 이 $\alpha$-Fe 형성에 의한 Fe3+이온의 결함이 자기 상호작용의 붕괴를 가져와서, 자기이방성의 변화를 초래하고 또한 Ms값의 증가를 가져오는 것으로 추측된다.

• 한국자원식물학회지
• /
• 제23권1호
• /
• pp.19-24
• /
• 2010

종자에 감마선 조사(0, 10, 15, 20, 25, 30 G y)를 실시한 후 768립과 972립의 종자를 각각 파종한 후 종자발아, 생장, 생존율 및 변이체 유발에 미치는 방사선량의 영향을 조사하였다. 술패랭이꽃은 90 Gy, 층꽃나무는 80 Gy 이상의 선량에서는 조사량이 증가될수록 발아가 지연되고 발아율도 저하되었다. 반치사선량은 술패랭이꽃 150 Gy, 층꽃나무는 100 Gy 수준이었다. 술패랭이꽃과 층꽃나무의 생장은 120 Gy 이상의 조사량에서 현저하게 억제 되었다. 술패랭이꽃은 $M_1$ 세대에서 17개의 변이체가 나타났으며, $M_2$ 세대에서 4개의 유망 변이체를 선발하였다. 층꽃나무는 $M_1$ 세대에서 7개의 변이체가 나타났으며, $M_2$ 세대에서 8개의 유망 변이체를 선발하였다.

• 한국재료학회지
• /
• 제25권8호
• /
• pp.423-428
• /
• 2015

Impedancemetric $NO_x$ (NO and $NO_2$) gas sensors were designed with a stacked-layer structure and fabricated using $LaCr_xCo_{1-x}O_3$ (x = 0, 0.2, 0.5, 0.8 and 1) as the receptor material and $Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ plates as the solid-electrolyte transducer material. The $LaCr_xCo_{1-x}O_3$ layers were prepared with a polymeric precursor method that used ethylene glycol as the solvent, acetyl acetone as the chelating agent, and polyvinylpyrrolidone as the polymer additive. The effects of the Co concentration on the structural, morphological, and $NO_x$ sensing properties of the $LaCr_xCo_{1-x}O_3$ powders were investigated with powder X-ray diffraction, field emission scanning electron microscopy, and its response to 20~250 ppm of $NO_x$ at $400^{\circ}C$ (for 1 kHz and 0.5 V), respectively. When the as-prepared precursors were calcined at $700^{\circ}C$, only a single phase was detected, which corresponded to a perovskite-type structure. The XRD results showed that as the Co concentration of the $LaCr_xCo_{1-x}O_3$powders increased, the crystal structure was transformed from an orthorhombic phase to a rhombohedral phase. Moreover, the $LaCr_xCo_{1-x}O_3$ powders with $0{\leq}x<0.8$ had a rhombohedral symmetry. The size of the particles in the $LaCr_xCo_{1-x}O_3$powders increased from 0.1 to $0.5{\mu}m$ as the Co concentration increased. The sensing performance of the stack-structured $LaCr_xCo_{1-x}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensors was found to divide the impedance component between the resistance and capacitance. The response of these sensors to NO gas was more sensitive than that to $NO_2$ gas. Compared to other impedancemetric sensors, the $LaCr_{0.8}Co_{0.2}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensor exhibited good reversibility and reliable sensingresponse properties for $NO_x$ gases.