• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1559-1569
• /
• 2002

In order to investigate the characteristics of electromagnetic flowmeter in two -phase flow, an AC electromagnetic flowmeter was designed and manufactured. In various flow conditions, the signals and noises from the flowmeter were obtained and analyzed by comparison with the observed flow patterns with a high speed CCD camera. The experiment with the void simulators in which rod shaped non-conducting material was used was carried out to investigate the effect of the bubble position and the void fraction on the flowmeter. Based on the results from the void simulator, two -phase flow experiments encompassed from bubbly to slug flow regime were conducted. The simple relation $\Delta$ $U_{TP}$ = $\Delta$ $U_{SP}$ (l-$\alpha$) was verified with measurements of the potential difference and the void fraction. Due to the lack of homogeneity in a rent two -phase flow, the discrepancy between the relation and the present measurement was slightly increased with void fraction and also liquid volumetric flux jf. Whereas there is no difference in the shape of the raw signal between single-phase flow and bubbly flow, the signal amplitude for bubbly flow is higher than that for single -phase flow at the same water flow rate, since the passage area of the water flow is reduced. In the case of slug flow, the phase and the amplitude of the flowmeter output show dramatically the flow characteristics around each slug bubble and the position of a slug bubble itself. Therefore, the electromagnetic flowmeter shows a good possibility of being useful for identifying the flow regimes.ul for identifying the flow regimes.

• Archives of Plastic Surgery
• /
• v.35 no.6
• /
• pp.755-758
• /
• 2008

Purpose: In order to determine the amount of wound healing, objective sequential assessments of changes in wound size and depth are essential. Although a variety of measurements for wound healing have been proposed, a gold standard for quantifying day-to-day changes in healing has not been established. We present here a simple and non-invasive wound measurement method that quantitatively and accurately documents changes of the size of a raw surface and the volume of a soft tissue defect using a stereoimage optical topometer(SOT) system. Methods: Using a 5mm diameter biopsy punch, four circular wounds were created on abdominal area of a diabetic mouse. Photographs were taken using SOT system at baseline, 5th day and 10th postoperative day. The wound margin was traced on a digitalized photo and evaluated the area and the volume of the wound by SOT system. Results: The SOT system calculated a mean wound surface of $15.93{\pm}0.29mm^2$ and volume of $827.50{\pm}88.86$ intensity/pixel${\times}$area(I/PA) immediately after wounding. On the 5th day after the operation wound surface declined by $10.73mm^2$ and on the 10th day declined by $5.95mm^2$. The wound volume also declined from 827.50 I/PA to 161.75 I/PA and 30.50 I/PA on 0, 5th and 10th day, respectively. Conclusion: The SOT system described in this study represents a reliable, simple, practical, and non-invasive technique to accurately monitor and evaluate wound healing.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.717-723
• /
• 2013

It has been reported that more than 10 percent of Korean elementary students are classified into ADHD (Attention Deficit / Hyperactivity Disorder). Major treatment of ADHD is medication. However, medication brings various kinds of side effects. Therefore, we need a way to improve attention leve, and lead children to voluntarily participate in it. With this purpose, we tried to develop a 3D tangible game to improve the children's attention level. To measure the level of attention enhancement, firstly we measured both the group average and the standard deviation of the measurement variables from the raw data gathered during the game play time. The measured value can be effectively used to measure the level of attention improvement of the children who might need treatment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.7
• /
• pp.1009-1014
• /
• 2018

In this paper, we have designed and implemented a system that utilizes a radar sensor to measure distance between a sensor and objects. The sensor module creates raw data and uploads the data on the distance measuring system, which detects the presence of objects by using standard deviation and average filters. The experiment found that an algorithm using average filters measured people with error rates of up to 9.7 meters and a maximum error rate of 0.02 meters or less. While in an algorithm using standard deviations, it was found that an object is measured at an error rate of up to a maximum distance of 9.7 meters and a maximum error rate of 0.15 meters. Therefore, we have concluded that if a distance was measured by using a radar sensor, algorithms using average filters resulted in a higher accuracy than standard deviations filters.

• Journal of Magnetics
• /
• v.10 no.3
• /
• pp.80-83
• /
• 2005

Cobalt ferrite and garnet powders were grown using a conventional ceramic method in two different ways for understanding the magnetic interaction between structurally different materials. Structures of these powders were investigated by using an X-ray diffractometer (XRD) and the magnetic interaction between iron ions and the magnetic properties of the powders were measured by a $M\ddot{o}ssbauer$ spectroscopy and a vibrating sample magnetometer (VSM), respectively. The result of the XRD measurement showed that the annealing temperature higher than $1200^{\circ}C$ was necessary to grow a $(CoFe_2O_4)_{0.5}(Y_3Fe_5O_{12})_{0.5}$ powder. $M\ddot{o}ssbauer$ spectra for the powders grown separately and mixed mechanically consisted of sub-spectra of cobalt ferrite and garnet, however, powders annealed together had an extra sub-spectrum, which was related with the magnetic interaction between the grain surface of cobalt ferrite and the one of the garnet. In case of annealing the powders at the temperature large enough to crystallize them, raw chemicals became fine cobalt ferrite and garnet particles at first and then these fine particles were aggregated and formed large grains of ferrite powders. The result of the VSM measurement showed that the powders prepared at $1200^{\circ}C$ had the similar saturation magnetization and the coercivity regardless of the preparation method.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.217-226
• /
• 2018

According to the Korea Coast Guard's maritime disaster statistics (Korea Coast Guard 2017, Korean Statistical information Service 2018), an average of 2,140 marine accidents occurred every year for the past 6 years and the number of accidents is increasing every year. Among them, maritime accidents of fishing vessels are the most frequent, and recently accidents involving fishing boat and leisure vessels are rapidly increasing as well. In particular, the number of accidents involving leisure vessels increased to about one-third of the accidents of fishing vessels, and emergency rescue requests are increasing every year accordingly. However, the number of crash accidents involving users of small vessels and marine leisure activities are increasing because of the difficulties of installing navigation equipment and electronic navigation charts. Recently, the demand for precise positioning using mobile devices is increasing in the fields of maritime safety, piloting support, and coastal survey. Although various applications of smart devices provide location-based services for users, the measurement results are discontinuous when using the position coordinates of the National Marine Electronics Association (NMEA) calculated by smartphone. Recently, Google announced that they will provide GPS raw data to developers from Android 7.0 Nougat. As a result, developers have an opportunity to receive precise carrier phase and code measurements to make more accurate positioning according to the performance of Android devices. This study analyzed GPS positioning performance using Android devices, and compared and analyzed the positioning performance at sea with high-performance GPS receivers.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.142-150
• /
• 2019

Muzzle Velocity is one of the most important measurement items for evaluation of ammunition. The muzzle velocity is defined as the velocity when the projectile leaves the muzzle. Particularly, since the muzzle velocity is closely related to the performance of the propellant, precise measurement of muzzle velocity is required. Doppler radar is used to measure the muzzle velocity, but the quality of Doppler radar signal depends on the test site environment. In this paper, a method to remove the clutter that degrades the signal quality of Doppler radar by improving the structure of the test site and the signal processing method is suggested. For the application of the improved signal processing method, a program for acquiring Doppler radar's raw Doppler data was created. Statistical verification of the velocity data obtained through the improvement of the test site structure and signal processing method proved that the proposed method is effective for the removal of clutter as compared with the existing method.

• Smart Structures and Systems
• /
• v.33 no.2
• /
• pp.93-103
• /
• 2024

Despite the rapid development of sensors, structural health monitoring (SHM) still faces challenges in monitoring due to the degradation of devices and harsh environmental loads. These challenges can lead to measurement errors, missing data, or outliers, which can affect the accuracy and reliability of SHM systems. To address this problem, this study proposes a classification method that detects anomaly patterns in sensor data. The proposed classification method involves several steps. First, data scaling is conducted to adjust the scale of the raw data, which may have different magnitudes and ranges. This step ensures that the data is on the same scale, facilitating the comparison of data across different sensors. Next, informative features in the time and frequency domains are extracted and used as input for a deep neural network model. The model can effectively detect the most probable anomaly pattern, allowing for the timely identification of potential issues. To demonstrate the effectiveness of the proposed method, it was applied to actual data obtained from a long-span cable-stayed bridge in China. The results of the study have successfully verified the proposed method's applicability to practical SHM systems for civil infrastructures. The method has the potential to significantly enhance the safety and reliability of civil infrastructures by detecting potential issues and anomalies at an early stage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.267-273
• /
• 2009

Antioxidative, antimicrobial activities and Raw 264.7 cell viability as cytotoxicity of various solvent extracts from leaf of Eriobotrya japonica Lindl. dried by different methods were investigated for processing as functional ingredient. In DPPH radical scavenging activity, RLE (80% EtOH extract of raw leaf) and FLE (80% EtOH extract of freeze-dried leaf) exhibited strong scavenging effect on $300{\mu}M$ DPPH radical solution (1.71 mg/mL and 2.11 mg/mL for RLE $SC_{50}$ and FLE $SC_{50}$). Also in nitric oxide scavenging activity, RLE and FLE showed strong activities (83.9% and 82.2% in 5 mg/mL sample concentration). Total phenolic compound contents of each extracts were found to be $73.7{\sim}215.4$ mg/g and RLE was showed the highest phenolic compound content. Also, total flavonoid contents were found to be $24.85{\sim}110.3$ mg/g and RLE was showed the highest flavonoid content. In antimicrobial activity, RLE was showed higher growth inhibition effect against all microbial strains. RLE, RLW (hot water extract of raw leaf), and FLW (hot water extract of freeze-dried leaf) exhibited strong antimicrobial activities against MRSA and S. aureus. In measurement of cytotoxicity by MTT assay, Raw 264.7 cell viabilities of 80% EtOH extracts showed better effect than water extracts. Especially viability of RLE was found be over 100% in every tested sample concentration.

• International Journal of Oral Biology
• /
• v.32 no.1
• /
• pp.23-34
• /
• 2007

We performed the present study to investigate whether Rehmannia glutinosa Libosch (RG) extracts (RGX) and Eleutherococcus senticosus Max (ES) extracts (ESX) play any roles in bone metabolism. We examined cellular activities of bone cells by measurement of osteoblastic cell viability, osteoprotegerin (OPG) secretion from osteoblasts, osteoclastogenesis, and osteoclastic activity. There is no cytotoxicity from osteoblasts after treatment with RGX and ESX. The secretion of OPG from the osteoblasts showed marked increases after treatment with RGX and ESX. In addition, RGX and ESX treatment decreased the number of tartrate-resistant acid phosphatase-positive multinucleated cells and the resorption areas. RGX and ESX, when mixed at optimal ratios, induced synergic effects, in vitro. OPB, which showed synergic effects, is the extract of natural ingredients RG and ES mixed at a raw material weight ratio of 4 : 1. It can be suspected that extracts of RG and ES mixtures contains active ingredients involved in bone tissue metabolism and may be effective in improving osteoporosis.