• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.341-347
• /
• 2020

This study was conducted to identify the oral function problems of workers according to Korean Standard Classification of Occupations (KSCO) and to provide evidentiary material to promote them to revise the Occupational Safety and Health Act so that workers can benefit from the collective oral healthcare project. For the research materials, it was used the 7th raw data (1st and 2nd) of National Health and Nutrition Examination Survey. It was examined the problems of chewing and speaking for the workers over 19 years old by KSCO. The connection between the types of workers and the problems of chewing and speaking has been confirmed (p<0.05). In order to improve the workers' oral healthcare, the collective oral healthcare project should be implemented. Therefore, the Occupational Safety and Health Act should be revised to hire professional health care manager with expertise, who will be host of the collective oral healthcare project.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.1008-1012
• /
• 1995

Glutinous rice was microparticulated and air-classified at different air classifying wheel speeds (ACWS) of 20,000 rpm and 15,000 rpm in a Turboplex classifier. The starch was concentrated to a coarse fraction and the protein was shifted to a fine fraction. The degree of starch damage of the coarse fraction was comparable to that of traditionally soaked glutinous rice. Yoogwa(Korean cracker) made from the fractions of $ACWS\;15,000{\sim}20,000\;rpm$ and below ACWS 15,000 rpm was very comparable to that made by the traditional method in degree of puffing, hardness and internal structure. It was also confirmed by the sensory evaluation, indicating that the microparticulation/air classification technology could be applied to produce raw material of Yoogwa. The developed noble process could exclude the long soaking step in the traditional Yoogwa process and reduce the pretest time remarkably.

• Journal of Climate Change Research
• /
• v.4 no.1
• /
• pp.27-39
• /
• 2013

In this study, the anthracite coal being used as fuel in Korea were classified into different types. These types include the domestically produced anthracite, imported anthracite used as raw material, and imported anthracite used as fuel. Each of the calorific values and greenhouse gas emission factors were calculated. The calculation of greenhouse gas emission factors resulted in the domestically produced anthracite as $111,477{\pm}4,508kg\;CO_2/TJ$, the imported anthracite used as raw material as $108,358{\pm}4,033kg\;CO_2/TJ$, and anthracite used as fuel was displayed as $103,927{\pm}8,367kg\;CO_2/TJ$. Additionally, the amount of greenhouse gas emission based on these calculated emission factors was displayed as $6,216,942ton\;CO_2$, which resulted as 12.7% lower than the green house gas emission amount which was calculated without distinguishing anthracite coal in details. Therefore, collecting activity data through a detailed classification of anthracites facilitate a more accurate calculation of greenhouse gas emission amount compared to collecting activity data through combination. Furthermore, since the anthracite coal used domestically possesses characteristics differing from the anthracite coal proposed by the IPCC, anthracite coal should be classified for each purpose and calculated for the improvement of the national greenhouse gas inventory.

• Analytical Science and Technology
• /
• v.35 no.2
• /
• pp.69-81
• /
• 2022

The method of measuring and classifying the energy category of neutrons directly using raw data acquired through a CZT detector is not satisfactory, in terms of accuracy and efficiency, because of its poor energy resolution and low measurement efficiency. Moreover, this method of measuring and analyzing the characteristics of low-energy or low-activity gamma-ray sources might be not accurate and efficient in the case of neutrons because of various factors, such as the noise of the CZT detector itself and the influence of environmental radiation. We have therefore developed an efficient method of analyzing radiation characteristics using a neutron and gamma-ray analysis algorithm for the rapid and clear identification of the type, energy, and radioactivity of gamma-ray sources as well as the detection and classification of the energy category (fast or thermal neutrons) of neutron sources, employing raw data acquired through a CZT detector. The neutron analysis algorithm is based on the fact that in the energy-spectrum channel of 558.6 keV emitted in the nuclear reaction ¹¹³Cd + ¹n → ¹¹⁴Cd + in the CZT detector, there is a notable difference in detection information between a CZT detector without a PE modulator and a CZT detector with a PE modulator, but there is no significant difference between the two detectors in other energy-spectrum channels. In addition, the gamma-ray analysis algorithm uses the difference in the detection information of the CZT detector between the unique characteristic energy-spectrum channel of a gamma-ray source and other channels. This efficient method of analyzing radiation characteristics is expected to be useful for the rapid radiation detection and accurate information collection on radiation sources, which are required to minimize radiation damage and manage accidents in national disaster situations, such as large-scale radioactivity leak accidents at nuclear power plants or nuclear material handling facilities.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.21-27
• /
• 2005

In order to conduct research on oil originated in Mongolia for further application of petroleum not only as fuel but also as raw material for organic synthesis, we need to study the physical, chemical characteristics and individual, group hydrocarbon's compositions of main petroleum fractions. A number of studies and surveys on the physical and chemical characteristics, group hydrocarbon's composition of petroleum deposits in Zuun-Bayan, Sukhaibulag, Tsagaan Elst, Tamsagbulag have been carried out earlier through n-g-M, aniline point and dispersimetric methods successfully. Yet a detailed chromatographical and NMR spectroscopic study for the individual hydrocarbon's composition of Tamsagbulag oil main fractions has not been conducted. In the present study the results of GC analyses of gasoline fractions of wells 19-3, 19-13 and 19-10, Tamsagbulag (Eastern Mongolia) were presence. The gasoline fractions of given wells were characterized by the high concentration of paraffins and presence of trace amount of olefins. There were identified 69 paraffins, 45 naphthenes, 41 aromatics and 3 olefins in total 158 individual hydrocarbons from each samples of gasoline fraction. The first attempts to classify Tamsagbulag oil under the individual hydrocarbon's composition data were successfully conducted and the supposition of a genetic classification of given oil as "sapropelic" type was made.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.7
• /
• pp.131-143
• /
• 2023

In the future knowledge society, the importance of business data is expected to increase, and it is recognized as a raw material for companies to manufacture product or develop service. As the importance of data increases, methods to calculate the economic value of database assets is being studied. There are many studies to evaluate the value of database assets, but the characteristics of database assets are not fully reflected. In this study, we classified database assets into revenue-type, non-revenue-type, and public-type database assets by considering the characteristics of database assets. In addition, focusing on the fact that revenue-type database assets can be valued similarly to existing technology valuation, we developed a method for calculating the life of database assets that includes risk-adjusted discount rate.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.2
• /
• pp.117-135
• /
• 2016

The present study was performed to develop a functional raw food material from hydrolyzed whey protein powder (23%-GNANA) medication containing sialic acid as a marker compound that is naturally occurring at 7% concentration in GMP (glycomacropeptide). GMP is used worldwide in foodstuffs for babies and infants and is obtained from the milk protein as safe food. While the purpose of our detailed evaluation was aimed to assess preliminary NOAEL values for and above 2,000 mg/kg/day, a clinical dose allowance for 23%-GNANA (as per characteristic of a functional health product, a highly refined test substance of 23% (v/v) sialic acid combined in GMP), at the same time we also wanted to assess the safety of GMP hydrolyzate lacking sialic acid but with identical properties as GMP. Animal safety evaluation was conducted using 23%-GNANA as the test substance, produced from hydrolyzed whey protein powder (product name: HELICOBACTROL-23; provided by Medinutrol Inc. [Korea]; composed of 23% sialic acid and GMP protein) after isolating the sialic acid using enzymes approved as food additives, with GMP as a raw material, and subsequently increasing the content of xx up to 23% through 80% (v/v) ethanol soaking and concentrating, in accordance with GLP Guideline. The animal safety evaluation mentioned above was made on the basis of toxicity in SPF Sprague-Dawley female and male rats dosed with 10 mL of the test substance diluted to 0, 1,250, 2,500, and 5,000 mg/kg directly into their stomachs for 90 d. This was determined in terms of the general symptoms and animal viability, weight and amount of feed intake, eye examination, uracrasia tests, hematological and blood biochemical disorder tests, blood coagulation test, abnormal intestine weight, abnormalities during postmortem and histopathological examinations. Statistical significance was set at P<0.05. Based on the toxicity determination, a certain minor effect associated with the test substance was observed in male rats with no major effects of the tested substance, in comparison with the control group dosed with sterilized water. Nevertheless, the NOAEL value, evaluated as per toxicity criteria, was verified as 5,000 mg/kg/day (P<0.05). Similarly, for female rats, a certain minor effect associated with the test substance was observed in 5,000 mg/kg/day dosed group, with no major effect, yet the NOAEL value (as assessed as per toxicity criteria) was determined to be 5,000 mg/kg/day (P<0.05), which was the same as for male rats. Accordingly, the NOAEL values of the test substances for all female and male rats were finally verified as 5,000 mg/kg/day (P<0.05). In conclusion, it was determined that the 23%-GNANA test substance exceeds 2,000 mg/kg/day, the clinical allowance characteristic for functional health food, and was finally evaluated to cause no safety concerns when used as a raw material in functional health food production, which was the ultimate goal of the present study.

• Journal of Environmental Health Sciences
• /
• v.21 no.1
• /
• pp.56-67
• /
• 1995

This study was carried out to observe how composting reaction proceed in the optimum composting condition and to understand the characteristics of final compost, when swine feces was amended with different bulking material. Sawdust, rice straw, and rice hull were selected as bulking materials and each of these was mixed with swine feces to obtain the optimum range of moisture contents and C:N ratio. To grasp the influence of newspaper on cornposting reaction when it flew into the composting site intentionally or accidentally, another composting reaction using newspaper as a bulking material was studied. In this experiment, raw material mixes containing the same amount of organic materials were put into 4 composting reactors and composted in the same environmental condition for 3 weeks from Aug. 1, 1994 to Aug. 22, 1994. The followings are the main results of this study. 1. The maximum temperatures reached at during cornposting reaction were 53.8$\circ$C, 51.9$\circ$C, 52.7$\circ$C, and 52.1$\circ$C in the reactor using sawdust, rice straw, rice hull, and newspaper as a bulking material respectively: Thermophilic temperatures were maintained for 72, 108, 108, and 111 hours in each reactor. Mean temperatures of reactors using sawdust, rice straw, rice hull, or newspaper as a bulking materials were 39.7$\circ$C, 39.5$\circ$C, 41.3$\circ$C, and 40.3$\circ$C, but no significant difference between these mean temperatures was observed(p>0.05). Each composter showed significant difference from room temperature(p<0.01), and the mean difference between them was 9.4$\circ$C. 2. Ash contents of each reactor increased rapidly in order of rice straw, rice hull, newspaper, and sawdust according to the pattern of second order function. This rate of increase seemed to result from structural characteristics of a bulking material. The absolute values of second order coefficient of these regression functions were 0.0199, 0.0159, 0.0157, and 0.0144 in each reactor using rice straw, rice hull, newspaper, or sawdust as a bulking material. 3. C:N ratio decreased as the reaction proceeded. Degree of decrease was in order of rice straw, rice hull, newspaper, and sawdust. This sequence was consistent with the increase rate of ash content. The ratios of initial C:N ratio to final C:N ratio were 0.45, 0.53, 0.64, and 0.75 in each reactor using rice straw, rice hull, newspaper, and sawdust as a bulking material respectively. From this ratios, it was possible to infer that all the composting reactions were completed. 4. Fertilizer content containing in the final compost was 1.61~2.20% of N, and 0.35~0.54% of P in dry weight base. According to the classification standard for compost constituent by Higgins, all composts had the intermediate grade of N, but below the low grade of P excepting the newspaper amended compost(fall into the range of the low grade). 5. Heavy metal contents contained in the composts were analyzed. In case of Cd, the range of 0.58~1.11 $\mu$g/g was observed, and in case of Pb, the range of 24.76~39.53 $\mu$g/g was observed(in wet weight base). These values are below the permissible heavy metal level for compost of foreign countries.

• Journal of the Korean Institute of Gas
• /
• v.21 no.1
• /
• pp.6-17
• /
• 2017

Objectives : The purpose of this study was to obtain information regarding Globally Harmonized System(GHS) classification and health hazards that may result from a 4 weeks inhalation exposure of 3-Methylpentane in Sprague-Dawley rats. Methods : The testing method was conducted in accordance with OECD guidelines for the testing of chemicals No. 412(Subacute Inhalation Toxicity). The Rats were divided into 4 groups(5 male and 5 female rats in each group) and exposed to 0 ppm, 284 ppm, 1,135 ppm, 4,540 ppm 3-Methylpentane in each exposure chamber for 6 h/day, 5 days/week, for 4 weeks. After two weeks, the test animals were autopsied and carried out blood test and biochemical tests and histopathological examination. We used PRISTIMA (Toxicology data management system) to confirm the system and to have confidence of the raw data. Results : No death and particular clinical presentation including weight change and change of feed rate was observed. Relationship between dose, gender and response was also not significantly changed in hematologic examination, biochemical examination of blood and blood coagulation time. The histopathologic lesions caused by the test substance did not appear. Conclusions : NOAEL(No Observable Adverse Effect Level) of 3-Methylpentane is more than 4,540 ppm in male group and female group and the Ministry of Employment and Labor Guidance Announcement No. 2013-37(criteria for the classification marks and Safety of Chemicals) Specific target organ toxicity(repeated exposure) was determined with a substance that is not the separator material.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.151-161
• /
• 2013

This paper proposes a strategic model of linkage between productivity metrics and financial accounting metrics to properly evaluate the financial effect of TPM activities and the business performance. This linkage strategy provides a connection tool for clear communication between factory-level and headquarters that the metrics proposed by this paper ultimately improves a quality of support from the management by receiving the factors required for productivity activities in the practical field. This factor includes such as equipment, raw materials and labors. Here, we propose that chain reaction models using break down structure of productivity metrics and financial metrics enhance the knowledge sharing of KPI (Key Performance Indicator) which generally tend to create oversimplified communication between management in headquarters and employees in the practical fields. The productivity metrics include OEE(Overall Equipment Effectiveness) of TPM (Total Productive Maintenance), OLE (Overall Labor Effectiveness) of PAC(Performance and Analysis and Control) activities, and OYE (Overall Yield Effectiveness) of TMM(Total Material Management) activities. The financial accounting metrics include ROE(Return on Equity), ROA(Return on Asset), and AVR(Added-Value Rate). The suggested chain reaction model selects the financial metrics as initial stage and branch down until final stage of productivity metrics. When demand exceeds supply, an ideal speed rate, the lean OEE strategy can be initially applied to reduce the gap between the demand and supply, then apply variable costing to estimate correct amount of operating profit. In addition, the paper presents a new type of model for linkage between financial accounting metrics including CAPEX(Capital Expenditure), OPEX(Operating Expenditure), EVA(Economic Added Value), DCL(Degree of Combined Leverage), and TPM productivity activities including AM(Autonomous Maintenance), PM(Preventive Maintenance), MP(Maintenance Prevention) and QM(Quality Maintenance). In order to support the evidence of proposed linkage strategy, a case analysis on 52 projects from national TPM contest from 2011 to 2012 is analyzed. The case presents the classification of CAPEX and OPEX activities from TPM, and proposes the correct implementation of financial effect for TPM projects.