• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2005년도 국제학술대회
• /
• pp.263-272
• /
• 2005

Chlorine disinfection has been used in drinking water supply to disinfect the water-borne microbial disease which may cause to serious human disease. it is still the least costly, relatively easy to use, Chlorination is the primary means to disinfect portable water supplies and control bacterial growth in the distribution system. However, chlorine reacts with natural organic matter(NOM), that presents in nearly all water sources, and then produces disinfection by-products(DBPs), that have adverse health effects. Although the existent DBPs have been reported in drinking water supplies, it is not feasible to predict the levels of the various DBPs due to the complex chemistry reaction involved. 1. The objectives of this study is to investigate seasonal variation difference concentration of DBPs in the plant to tap water. The average concentration of THMs was 20.04 ${\mu}g/{\ell}$ , HAAs 8-15 ${\mu}g/{\ell}$ , HANs 2-4.5 ${\mu}g/{\ell}$ respectively. 2. Distant variation of DBPs furmation by the distance is that THMs concentration increased by 17% at 2km point from the plant and by 28% at 7km and HAAs, HANs also increase each by 16%, 32% at 2 km from the plant and 35%, 56% at 7 km. DBPs increase in water supply pipe continually, 3. The seasonal occurrence of BBPs is that in May and August DBPs concentration is very higher than in march, in May DBPs concentration is highest. The temperature is main factor of DBPs formation, precursor also. 4. Precursor which was accumulated for winter flowed into the raw water by flooding in spring and summer and produced DBPs. 5. Therefore for the supply of secure drinking water, it is required to protect precursor of flowing into raw water and to add to BCAA and DBAA to drinking water standards.

• 한국지반환경공학회 논문집
• /
• 제12권12호
• /
• pp.13-20
• /
• 2011

외수압에 의한 강관 라이닝 좌굴 사례를 조사, 평가하여 강관 라이닝의 안전성에 미치는 요소 및 그 중요도를 산정하고자 하였다. 대상터널은 ${\bigcirc}{\bigcirc}$광역상수도 도수시설인 직경 2m의 수로터널로서 터널 라이닝은 내부의 강관 라이닝과 배면의 뒷채움 콘크리트로 구성되어 있다. 두 개의 수로터널에서 발생된 강관 라이닝 좌굴 손상을 대상으로 손상의 형태 및 설계 조건을 상세하게 조사하였다. 좌굴 손상에 적용 가능한 좌굴 안전성 평가방법을 기존의 문헌 자료를 참조하여 선정하였으며, 손상에 대한 조사결과와 비교하였다. 또한 본 지역의 수리지질학적인 특성이 좌굴 손상에 미치는 영향을 검토하였다. 연구결과 수리지질학적 지층특성뿐만 아니라 터널 라이닝의 적절한 시공이 강관 라이닝의 좌굴에 영향을 미치는 중요한 요소이며, 외수압의 크기 결정은 수리지질 특성에 따라 산정되어야 하는 것을 알 수 있었다. 기존 손상 사례에 대한 연구는 압력 수로터널의 강관 라이닝에 대한 설계, 시공 및 유지관리 기간 중의 문제점 및 개선사항을 도출하는데 활용될 수 있을 것이다.

• 한국잠사곤충학회지
• /
• 제15권1호
• /
• pp.37-48
• /
• 1973

The purpose of this studies is to improve the cohesion of raw silk through various analyses on cocoon drying, cooking, reeling, re-reeling, and on the properties of water. Also we investigated the correlation between silk testing items which we have reached to the following results. 1. Drying of cocoon When cocoons were slowly dried with 100$^{\circ}C$, the results of cohesion became much better. On the other hand, the results were considerably decreased in case the temperature with 115$^{\circ}C$. 2. Cooking of cocoon In case of the cooking of cocoon, we found that the result of cohesion was best with incomplete cooking, that of the control was next, while in over cooking, the results were very low. Also the results of cohesion were much better when using the method of over cooking with sericin arrestive agent than that of incomplete cooking with sericin agglutinating agent. 3. Reeling of cocoon A) When the temperature of reeling bath was 25-45$^{\circ}C$, the results of cohesion test were much better, but at the temperature below 25$^{\circ}C$ or above 45$^{\circ}C$, the results became worse. B) With out the process of croissieur, the results of cohesion were too bad, but in case of croissieur more than 1cm, cohesion became better rapidly. Further more, we understood that the results of cohesion were improving slightly with longer length of croissieur. C) When the velocity of reeling was increased, the results of cohesion also improved. The best results were shown when reeling velocity was 180-220 r.p.m. But when the velocity was increased more than 220 r.p.m., the results of cohesion got worse more or less. D) When the temperature of the drying pipe in reeling machine was raised, the results of cohesion also showed a tendency to improve. 4. Re-reeling A) We could net reach a conclusion as to have correlation between the number of dipping repeat in vacuum tank and the results of cohesion before re-reeling process. B) When we used Seracol 500 as an agglutination protective agent with l/1000 to l/2000 of water, the results of cohesion test were better. C) When we used Pearl-lite as an agglutination protective agent with 1/1000 to 1/2000 of water, the results of cohesion were considerably better. D) We gained tile best results when used Cohesion Improving Chemical, A-80, with 500-1500 times diluted. 1) Results of cohesion was improved when humidity was low or temperature was high in the rereeling machine. 5. Filature water A) The water pH near the isoelectric point of protein showed the best cohesion, but the farther water pH, the worser results were obtained. B) With the increasing of M-alkalinity in filature water, the results of cohesion were worse. Above all, we understood the tendency of the results of cohesion get worse when the M-alkalinity is increased above 200 ppm. C) By increasing the total hardness of the filature water, it improved the results of cohesion. Especially, when the total hardness was above 300ppm, the results were extremely high. 6. Effects combination of each results A) The result of effects combination in filature processes with the obtained best conditions was distinctively improved. But the results could not reach in mathematicaly double effect. When reelied under worse conditions, the results of cohesion test were too bad. There was "effect limit" for the promotion. B) Generally the results of cohesion were bad when the filature conditions(the temperature, pressure and the properties of water, etc) are processed as sericin loss to be high. On the other hand, the results were very good when lower sericin loss was controlled in filature conditions. C) When filature conditions such as reeling velocity and croissieur length provide pysical cohesion ability and when raw silk dry fast during reeling and re-reeling, we found the result of cohesion was better. 7. Correlation of silk testing items. A) A negative correlation exists between the results of cohesion test and cleanness defect. Another word, the result of cohesion test was found to be worse as cleanness defect increased. B) In cleanness, cohesion has negative correlation against the number of slugs, but we could not find any correlation against long loops, loose ends. C) Cohesion has negative correlation against average neatness and low neatness defect. The better the results of neatness respectively, the better the results of cohesion found. D) There is no correlation between tenacity and the results of cohesion test, but there was high positive correlation between the results of elongation and those of cohesion test. The more elongation, the better the results of cohesion was found.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.665-670
• /
• 2010

Pollutants from urban pavement consists various kinds of substances which are originated from dry deposition, a grind out tire, corrosive action of rain to pavement and facilities and raw materials of the road etc.. These are major pollutants of urban NPS (Non-point source) during rainfall period. However there is not enough information to control such pollutants for appropriate management of natural water quality. In this study of transportation areas, three monitoring stations were set up at trunk road, urban highway and national road in Gyeongnam province. Runoff flow rate was measured at every 15minutes by automatic flow meters installed at the end of storm sewer pipe within the road catchment area for water quality analysis. Data was collected every 15 minutes for initial two hours of rainfall. Additional samples were collected 1-4 hours interval till the end of rainfall. The monitoring parameters were $COD_{Mn}$, SS, T-N & T-P and heavy metals. The average EMCs of TSS and $COD_{Mn}$ were 62.0 mg/L and 24.2 mg/L on the city trunk road, which were higher than those of urban highway and national road, indicating higher pollutant loads due to activities in the city downtown area beside the vehicle. On the other hand, the average EMC of T-N and T-P were in the range of 2.67-3.23 mg/L and 0.19-3.21 mg/L for all the sampling sites. Heavy metals from the roads were mainly Fe, Zn, Cu and Mn, showing variable EMCs by the type of road. From the TSS wash-off analysis in terms of FF(first flush) index, first flush phenomenon was clearly observed in the trunk road(FF : 0.89-1.43). However, such mass delivery behavior was not apparently shown in urban highway(FF : 0.90-1.11) and national road(FF : 0.81-1.41).

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.870-877
• /
• 2020

석션버켓기초는 20m 이상의 수심 조건에서 경제적인 시공이 가능한 건설 공법이다. 석션버켓기초는 내부가 비어 있는 양동이가 뒤집어진 형태의 구조물을 목표지점에 위치시킨 후, 버켓 내의 공기나 물을 흡입하여 내/외부의 수압차이에 의한 관입력으로 기초를 설치한다. 안정성 확보를 위해 버켓의 수직도 확보는 필수적이다. 그러나 해저지반의 불균질성이나 편심으로 인하여 버켓의 기울어짐이 발생할 수 있다. 석션버켓기초는 현재 시공과정에서 관입/인발 작업 반복을 통해 수직도를 확보하는 방법이 일반적으로 적용되고 있다. 그러나 이 방법은 현장 작업자의 경험 및 숙련도에 의존적이며 수직도 확보에 비교적 장시간이 소모된다. 본 논문에서는 실시간 석션버켓 수직도 모니터링 시스템을 제안한다. 제안된 시스템은 수직도 데이터를 수집하는 센서부, 수집된 데이터를 처리하여 무선 전송해 주는 컨트롤러부, 원형강관의 수직도 정보를 실시간으로 보여주는 디스플레이부로 구성되어 있다. 제안된 시스템은 기울기 센서와 임베디드 컨트롤러를 활용하여 구현되었다. 제안된 시스템의 실험 결과 roll/pitch가 0.028% 이내의 오차로 측정이 가능함을 확인하였다. 또한, 제안된 시스템을 석션버켓기초 모형실험에 적용하여 수직도 정보의 실시간 확인이 가능함을 보였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권2호
• /
• pp.96-103
• /
• 2009

고등어내장, 다랑어 내장 및 크릴새우 분쇄물을 사용하여 제조한 꽃게 통발용 인공미끼에 대하여 수중 생분해도와 현장해수에 미치는 영향을 조사하였다. 실내 생분해도 실험은 유효용량 10L의 아크릴 수조에 수리학적 체류시간은 12시간, 수조 통과유속은 1m/d로 물을 통과시키면서 시간에 따른 인공미끼의 생분해도를 평가하였다. 23일간의 실험기간 중 인공미끼는 원료의 종류에 관계없이 초기에 빠른 속도로 분해된 후 5일 후부터는 안정화되는 경향을 나타내었다. 분해속도는 사용 원료에 따라 다르게 나타났는데 유기물 분해속도 측면에서는 다랑어내장으로 만든 미끼가 가장 빠르게 분해되었는데 반해 암모니아성 질소 분해 측면에서는 고등어 내장을 이용하여 만든 미끼가 가장 빠르게 분해되는 것으로 나타났다. 인공미끼 사용이 해양생태계에 미치는 영향을 평가하기 위하여 인공미끼를 사용한 현장해수에서 통발의 위치 및 깊이에 따른 SS, COD, DO, 인 및 질소와 같은 해양수질을 측정하였다. 현장 해수와 대조구의 수질을 비교해 본 결과, 인공미끼 사용으로 인한 해양수질에 대한 영향은 무시할 수 있는 것으로 나타났다.