• Korean Journal of Food Science and Technology
• /
• v.24 no.1
• /
• pp.86-91
• /
• 1992

To develop an effective utilization method of skipjack tuna viscera, fish meal by an improved fermentation method(FFMA) was prepared by fermentation of the solid materials separated from autoclaved viscera with Aspergillus oryzae for 72 hours and by adding the concentrated soluble extracts separated from autoclaved viscera to the fermenting solid materials during fermentation, and FFMA fish meal was compared with the fish meals prepared by Kato mathod(FFMN) and conventional nonfermenting method(NFM). FFMN fish meal was prepared by fermenting the solid materials separated from autoclaved viscera with Aspergillus oryzae for 17 hours without adding the soluble extract. The extracts from FFMA fish meal(FFMA-E) and raw viscera(RM-E) were also prepared respectively after digestion with proteases obtained from Bacillus subtilis and Aspergillus oryzae and compared with each other on the contents of free amino acids. The peroxide values decreased greatly in contents of $Vitamin\;B_{1},\;B_{2}\;and\;C$ significantly increased in FFMA fish meal compared with those of other fish meals. The total free amino acid content of FFMA-E was significantly higher then that of RM-E. The total free essential amino acid content also greatly increased in FFMA-E in which threonine, methionine and lysine showed remarkable increments. Almost all individual nonessential amino acids were higher in FFMA-E then in RM-E. The content of taurine, a nonprotein amino acid, greatly increased compared with other nonprotein amino acids in both extracts.

• Journal of Food Hygiene and Safety
• /
• v.2 no.3
• /
• pp.109-119
• /
• 1987

This Study was conducted to provide fundamental data necessary for the improvement of milk quality. Milk quality was evaluated by 3 methods; milk fat percent measurement, methylene blue reduction test (MBRT), and somatic cell count measurement. At the same time, condition of hygienic management of dairy facilities and cows was investigated in each of 234 dairy farms located in Gyunggi area from May, 1986 to April, 1987. The results were as follows 1. Average milk fat percents among farms were 3.67%, 3.64%, 3.43%, 3.48% in January, April, July and October, respectively. The diUerences of milk fat percent from month to month were statistically significant (p<0.005). and the seasonal average was 3.56%. 2. Numbers of farms which produced bulk milk of first grade by MBRT were 153(65.4%), 157(67.1%), 76(32.5%) and 141(60.2%) in January, April, July and October, respectively. The diUerences among months were statistically significant (p<0.005). Also, significant diUerences of grade by milking quantity (p<0.05), presence of milk cooler (p<0.01), and collection means (p<0.05) were demonstrated. 3. Number8 of farms which produced bulk milk of fir8t grade in somatic cell count measurement were 227(97.0%), 226(96.6%), 218(93.2%) and 223(95.3%) in January, April, July and October, respectively. And diUerences of grade by the pratice of teat dipping, dry cow therapy and manner in which udder washing towel was used statisticaJJy 8ignificant (p<0.01).

• Journal of Nutrition and Health
• /
• v.51 no.3
• /
• pp.215-227
• /
• 2018

Purpose: This study was conducted to verify the effects of increases in consuming Korean food in patients who underwent cardiovascular disease (CVD) surgery based on a Korean diet control education program and to investigate the effects of Korean diet control nutrition education on risk factors of CVD, changes in amounts of medication, and nutritional intakes. Methods: The subjects consisted of 15 patients who have undergone CVD surgery within three years and continuously taken cardiovascular drugs. The Korean traditional diet (KTD) emphasizes intake of vegetables and fermented foods to lower saturated fat and cholesterol intake. We applied a KTD education program that included a modified DASH (The dietary approaches to stop hypertension) diet for cardiovascular disease patients. Korean diet control education was then applied to the patients for 12 weeks to evaluate the risk factors of CVD and the state of nutritional intakes. Results: The Korean diet control compliance score increased significantly (p < 0.001) as Korean diet control education was implemented. Additionally, the obesity indexes, waist circumference (WC) (p = 0.002) and waist-to-hip ratio (WHR) decreased significantly (p < 0.001) after subjects received the education. Moreover, the glycemic control index, HbA1c, was significantly decreased (p < 0.05) from $7.3{\pm}1.0%$ before the education to $7.0{\pm}1.1%$ after the education. Changes in the amounts of Korean diet intake consisted of significant increases in cooked rice with whole grains, narmuls (vegetables either raw or cooked), kimchi, and traditional fermented foods following the education. Moreover, the nutritional intake after the education showed significant decreases (p < 0.05) in animal protein, animal lipids, and cholesterol. However, the intakes of Na, K, dietary fiber, vitamin A, vitamin $B_6$, vitamin C, and folic acid were significantly increased. Conclusion: The active encouragement of consuming Korean food and the intervention of implementing diet control education positively affected nutritional intake, the obesity index and glycemic control of patients who have undergone CVD surgery.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.253-259
• /
• 2005

This study was accomplished using attached $A^2/O$ process that contains nonsurface-modified and surface-modified polyethylene media inside the Anaerobic/Anoxic, Oxic tank, respectively. We could make the hydrophobic polyethylene media have hydrophilic characteristics by radiating ion beam on the surface of the media. The objectives of this study is to investigate the removal efficiencies of the organics and nitrogen when the step feed ratio of raw wastewater into anaerobic and anoxic tank is changed. In this case, we assumed that the denitrification rate can be improved because the nitrifiers in anoxic tank can perform denitrification using RBDCOD instead of artificial carbon sources (for example, methanol, etc.). The wastewater injection rate into anaerobic/anoxic tank was set up by the ratio of 10 : 0, 9 : 1, 8 : 2, 6 : 4, and the results of BOD removal efficiency showed similar trends with $93.3\%,\;92.6\%,\;92.4\%\;and\;91.6\%$, respectively. But the BOD removal efficiency (utilization of the organics) in the anoxic tank was in the order of 9 : 1 $(84.8\%)$, 10 : 0 $(77.0\%)$, 8 : 2 $(75.3\%)$, and 6 : 4 $(61.1\%)$. The T-N removal efficiency was most high when the ratio is 9 : 1 $(67.4\%)$, and other conditions, 10 : 0, 8 : 2, 6 : 4, showed $61.3(\%),\;60.7\%,\;55.5\%$, respectively; the ratio 6 : 4 was found to be lowest T-N removal efficiency, lower than the ratio 9 : 1 by $12\%$. Though the nitrification rate of the ratio 10 : 0, 9 : 1, and 8 : 2 showed similar levels, the ratio 6 : 4 showed considerable inhibition of nitrification, ammonia was the great portion of the effluent T-N. The advantages of this process is that this process is cost-saving, and non-toxic methods than injecting the artificial carbon source.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.1-41
• /
• 1988

For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.

• Journal of Life Science
• /
• v.18 no.3
• /
• pp.387-394
• /
• 2008

This research was performed to determine the proximate compositions, mineral contents, alginic acid, antioxidative activities and amino acids of sea mustards (Miyeok: Undaria pinnatifida) collected from Gijang and Wando area. Ash content was higher in Gijang samples, whereas carbohydrate and moisture were higher in Wando Sil Miyeok. General compositions of dried sea mustard showed different contents as manufacture's company and places. The major free amino acids were hydroxyproline, alanine, glutamic acid and asparagine in Gijang samples. Both Gijang and Wando Sil Miyeok showed lower contents comparing with Gijang Gadak Miyeok. Major mineral content was Na, K, Ca, Mg and P, and especially, Na and K were the most abundant in both Gijang and Wando sea mustards. Alginic acid content was almost similar in both sea mustards. Antioxidative activity of methanol extract of sea mustards was measured by using DPPH radical scavenging and SOD-like activity. DPPH radical scavenging activity was 45.5% $(40\;{\mu}g/ml)$ in Gijang Gadak Miyeok and 37.0% and 26.0% $(40\;{\mu}g/ml)$ in Gijang and Wando Sil Miyok, respectively. SOD-like activity of Gijang and Wando Sil Miyok was 63% and 71% $(10\;{\mu}g/ml)$, respectively. These results show that biological activities depend on Miyeok manufacture's process. When stimulated macrophages RAW264.7 cells with lipopolysaccharide (LPS), inhibition of NO production in Gijang Sil Miyeok (44.2%) was 9% high comparing with that of Wando Sil Miyeok (35.7%).

• Journal of Animal Science and Technology
• /
• v.55 no.1
• /
• pp.7-11
• /
• 2013

The purpose of this study was to estimate (co) variance components of three milk production traits for genetic evaluation using a multiple lactation model. Each of the first five lactations was treated as different traits. For the parameter estimation study, a data set was set up including lactations from cows calved from 2001 to 2009. The total number of raw lactation records in first to fifth parities reached 1,416,589. At least 10 cows were required for each contemporary group, herd-year-season effect. Sires with fewer than 10 daughters were discarded. Lactations with 305d milk yield exceeding 15,000 kg were removed. In total, 1,456 sires of cows were remained after all the selection steps. A complete pedigree consisting of 292,382 records was used for the study. A sire model containing herd-year-season, caving age, and sire additive genetic effects was applied to the selected lactation data and pedigree for estimating (co) variance components via VCE. Heritabilities and genetic or residual correlations were then derived from the (co) variance estimates using R package. Genetic correlations between lactations ranged from 0.76 to 0.98 for milk yield, 0.79~1.00 for fat yield, 0.75~1.00 for protein yield. On individual lactation basis, relatively low heritability values were obtained 0.14~0.23, 0.13~0.20 and 0.14~0.19 for milk, fat, and protein yields, respectively. For the combined lactation heritability values were 0.29, 0.28, and 0.26 for milk, fat, and protein yields. The estimated parameters will be used in national genetic evaluations for production traits.

• Journal of Aquaculture
• /
• v.18 no.4
• /
• pp.225-230
• /
• 2005

This experiment was conducted to compare the effects of extruded pellets and raw fish-based pellet on olive flounder Paralichthys. olivaceus. Six diets were prepared for this study: two formulated extruded pellets (FEP1 & FEP2), three commercially available extruded pellets (CEP1, CEP2 & CEP3) and moist pellet (MP). Weight gain offish fed FEP1 and CEP3 were significantly higher (P<0.05) than those of fish fed FEP2, CEP1, CEP2 and MP, while that of fish fed MP was not significantly different (f<0.05) from those of fish fed the FEP2, CEP1 and CEP2. Feed efficiency of fish fed CEP2 was significantly lower (P<0.05) than those of fish fed FEP1, FEP2, CEP1, CEP3 and MP. There was no significant difference in protein efficiency ratio and hepatosomatic index between fish fed FEP1 and CEP3, and among fish fed FEP2, CEP1 and CEP2. There was no significant difference in condition factor among fish fed the FEP1 and CEP3, and between fish fed FEP2, CTP1 and MP. However, fish fed MP had a lower survival rate than fish fed the other five EP These results suggest that diet FEPl could be developed to replace MP for the owing stage of flounder without adverse effects on growth performance.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.421-427
• /
• 2022

In this study, Jeju Tatary buckwheat tea's chemical composition and physiological activities were compared according to the leaching temperature (60, 80, 100 ℃). As the leaching temperature is increased, the degree of browning is induced. However, there was no significant change in pH. The total polyphenol content was higher at 80 ℃ than at 60 ℃ leaching temperature, but significantly decreased at 100 ℃ leaching temperature (60 ℃: 17.06 mg GA/g, 80 ℃: 20.09 mg GA/g, 100 ℃ :18.45 mg GA/g). There were high content of flavonoid and rutin as the leaching temperature increased. Consistently, 2,2-diphenyl1-picrylhydrazyl (DPPH) radical scavenging activity and tyrosinase inhibitory activity were significantly higher with increasing temperature (DPPH % inhibition: 60 ℃: 41.88%, 80 ℃: 46.01%, 100 ℃: 46.80%/tyrosinase inhibitory activity: 60 ℃: 9.38%, 80 ℃: 22.94%, 100 ℃: 28.17%). However, there was no significant difference in DPPH radical scavenging activity between 80 and 100 ℃. A cytotoxicity test was performed by treating with Jeju Tatary buckwheat extract into mouse macrophage cells (Raw264.7). 100 and 200 ㎍/mL treatment (100 ℃ extract) were significantly upregulated the survival rate, but there was no significant difference in other concentrations. Collectively, most of the bioactive components, antioxidant activity, and tyrosinase inhibitory activity were induced as the leaching temperature increased. However, the content of polyphenols which are known to have antioxidant activity, was significantly reduced at 100 ℃ leaching temperature. Several reports have demonstrated that leaching at too high temperature lowered the overall acceptability, so the optimal leaching condition of Tatary Buckwheat is 80 ℃, 5 min in this study.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.4
• /
• pp.499-509
• /
• 2008

The purpose of this study was to investigate the changes in physicochemical and sensory properties of raw fruits during washing and chlorine treatments. Strawberry and banana were pre-prepared at different concentration of chlorinated water(0 ppm, 50 ppm and 100 ppm), immersion time(3 min and 5 min), and number of post-rinsing(1 time, 2 times and 3 times). The physicochemical properties such as pH, sugar contents, residual chlorine contents, color values and hardness of the fruits were analyzed, and the sensory quality were evaluated throughout the sterilization treatment process. After washing strawberry with 100 ppm chlorinated water and 3 times of post-rinsing, pH and residual chlorine contents were showed a little difference, while sugar contents, hardness, and color values(L, a and b) were reduced. In case of banana, pH, sugar contents and residual chlorine contents were not affected, and hardness and L color value were reduced. However, a and b color values of banana were gradually increased as the development of brown discoloration. Sensory properties of the samples were affected by the chlorine sterilization treatment. In overall acceptance, strawberry and banana treated with 100 ppm chlorinated water showed the lowest scores among treatments. Therefore it could be suggested that the application of 50 ppm chlorinated water for $3{\sim}5$ minutes with over 3 times of post-rinsing was the effective pre-preparation method without affecting the quality of the fruits.