• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.11a
• /
• pp.43-48
• /
• 2003

This paper investigate that the effect of the concrete containing mineral admixtures(pozzolanic materials such as fly-ash, ground granulated blast-furnace slag, silica fume and meta kaolin) on the resistance properties to chloride ion invasion. The purposed testing procedure was applied to the concrete added mineral admixtures for 3~4 replacement ratios under W/B ratios ranged from 0.40 to 0.55. For the electrical migration test, Tang and Nilsson's method was used to estimate the migration coefficient of chloride ion. As a results, the W/B ratios, kinds of admixture and replacement ratios, water curing periods had a great effect on the migration coefficient of chloride ion, and the optimal replacement ratios of admixture had a limitation for each admixtures. Also, the addition of mineral admixtures by mass(replacement of OPC) enhanced the resistance of the mixture to chloride penetration compared with the plain concrete. The amount of acid soluble chloride ions and water soluble chloride ions were varied with the kinds of mineral admixtures. The compressive strength was shown related to the migration coefficient of chloride ion, the compressive strength increased with the decreasing migration coefficient of chloride ion. Below the 50MPa, the variation of migration coefficient of concrete added mineral admixtures was bigger than plain concrete.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.109-114
• /
• 2002

The purpose of this study is to propose the general method for evaluating the equivalent damping ratios of a structure with supplemental response control dampers. We define Lyapunov function of which derivative can be expressed in autoregressive form and evaluate the equivalent damping ratios by using Lyapunov function and its derivative. This Lyapunov function may be called as generalized structural energy. In this study, it is assumed that the response of a structure is stationary random process and control dampers do not affect the modal shapes of a structure, and the structure has proportional damping. Proposed method can be used to get the equivalent damping ratios of a structure with non-linear control dampers such as friction dampers as well as linear control dampers. To show the effectiveness of the proposed method. we evaluate the equivalent damping ratios of a structure with viscous dampers. AMDs. and friction dampers. The equivalent damping ratios from proposed method are compared to those from eigenvalue analysis for linear control dampers. and those from time history analysis for non-linear control dampers. respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.43-48
• /
• 2003

This paper investigate that the effect of the concrete containing mineral admixtures(pozzaolanic materials such as fly-ash, ground granulated blast-furnace slag, silica fume and meta kaolin) on the resistance properties to chloride ion invasion. The purposed testing procedure was applied to the concrete added mineral admixtures for 3∼4 replacement ratios under W/B ratios ranged from 0.40 to 0.55. For the electrical migration test, Tang and Nilsson's method was used to estimate the migration coefficient of chloride ion. As a results, the W/B ratios, kinds of admixture and replacement ratios, water curing periods had a great effect on the migration coefficient of chloride ion, and the optimal replacement ratios of admixture had a limitation for each admixtures. Also, the addition of mineral admixtures by mass(replacement of OPC) enhanced the resistance of the mixture to chloride penetration compared with the plain concrete. The amount of acid soluble chloride ions and water soluble chloride ions were varied with the kinds of mineral admixtures. The compressive strength was shown related to the migration coefficient of chloride ion, the compressive strength increased with the decreasing migration coefficient of chloride ion. Below the 50MPa, the variation of migration coefficient of concrete added mineral admixtures was bigger than plain concrete.

• Management & Information Systems Review
• /
• v.26
• /
• pp.293-309
• /
• 2008

This study examined the market efficiency of korea stock market by comparing variance ratios(VR) of stock groups which is sorted by market capitalization. We compute variance ratios of KOSPI large capitalization, midium capitalization, and small capitalization for 546 trading days from 2006/01/02 to 2008/04/15. For our study, we also use high frequency data that is; intra-day 1 minute data. The characteristics of variance ratios of stock groups by market capitalization as follows: From 1 to 5 minute interval, variance ratios of three stock group increase far from zero(0). The longer time interval, the more variance ratios decrease, but only large capitalization converge on around zero. This means that the market of large capitalization is more efficient compare to other stock groups. The entire sample period can be divided two sub-period because the impact of sub prime crisis arised from U.S.A. influences Korea stock market. Before sub prime crisis, the VRs of mid cap and small cap do not converge on around zero except large cap although the time interval is longer. After sub prime crisis, the VRs of three stock groups decrease when time interval is longer, but only large cap converge on around zero. We conclude that large cap is more efficient than other stock groups in Korea Stock Market.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.501-506
• /
• 2004

We have investigated the spectral properties of DNA, including its electric absorption, circular and linear dichroism (CD and LD), and fluorescence emission, in the DNA-linear polyethyleneimine (LPEI) and DNA-branched polyethyleneimine (BPEI) complexes at various polymer concentrations. The spectral properties of both complexes are similar. We observed a relatively moderate change in the absorption and CD spectra at low amine/DNA phosphate (NIP) ratios (< 0.5), followed by a drastic collapse within the N/P range from 0.8 and 1.0. The absorption and CD spectra recovered as the N/P ratio increased to ca. 1.2. In contrast, the LD and emission of ethidium intercalated between the DNA bases decreased almost linearly at N/P ratios between 0.0 and 1.0. These spectra never recovered at higher N/P ratios. We believe that the moderate changes in the spectrum at low N/P ratios occurred because of electrostatic interactions between DNA and BPEI, while the collapsed spectra at N/P ratios between 0.5 and 1.5 occurred because of condensation/aggregation of the DNA. Considering the structure of the polymers, we suggest that the secondary amino group of LPEI and all three amino groups of BPEI are equally involved in DNA condensation.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.17-26
• /
• 1996

This research was accomplished to evaluate possibility of using paper sludge for the raw materials of wood based panel products. The experimental panels were manufactured by four mixed ratios, the proportion of paper sludge to wood particle: 20:80, 30:70, 40:60, 50:50% (oven dry weight basis) and by three composition types, sludge-particle mixed board, three layered sludge-particle board and three layered particle board. They were tested mechanical (bending strength and internal bond) and physical properties (water absorption, thickness swelling and linear expansion). From the results they were shown that bending strength of mixed and three layered sludge-particle board were decreased with increasing of composition ratios of sludge. And the mechanical and physical properties of the boards of three layered composition types have superior to those of mixed composition type. Although composition ratios of sludge increased, the internal bond strength and dimensional stability of sludge-particle board not decreased quantitatively. We concluded that the mechanical and physical properties of three layered sludge-particle board were similar w those of three layered particle-board (control) made by our laboratory design. Therefore, it was recognized that paper sludge can be used as potential raw material in particle-board manufacturing industry.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.109-116
• /
• 2002

We propose a novel very short (< $300{\mu}m$) vertical directional coupler switch with high extinction ratios larger than 30 dB. The device consists of a switching operation induced section (SOIS), an extinction ratio adjusted section (ERAS), and an extinction ratio enhanced section (ERES). These are achieved by changing the refractive index of one core. The switching operation is induced by changing the refractive index of one core in the SOIS. The improvement of extinction ratios larger than 30 dB for both the cross and bar states is made by controlling the asymmetry of the refractive indices of both cores in the ERES. Through the ERAS, different extinction ratios between the cross and bar states at the end of the SOIS are changed to the same value. For this reason, the optimum asymmetry of the refractive indices of the cores for the maximum extinction ratios and the lengths of ERES are the same for cross and bar states. Design guidelines for high extinction ratios with large tolerances are presented.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.81.3-81.3
• /
• 2016

We examine whether the observational stand-off distance ratios of CMEs and their associated ICMEs could be explained by theoretical model or not. For this, we select 16 CME-ICME pairs from September 2009 to October 2012 with the following conditions: (1) limb CMEs by SOHO and their associated ICMEs by twin STEREO spacecraft and vice versa when both spacecraft were roughly in quadrature; (2) the faint structure ahead of a limb CME is well identified; and (3) its associated ICME clearly has a sheath structure. We determine the observational stand-off distance ratios of the CMEs by using brightness profiles from LASCO-C2 (or SECCHI-COR2) observations and those of the ICMEs by solar wind data from STEREO-IMPACT/PLASTIC (or OMNI database) observations. We also determine the theoretical stand-off distance ratios of the CME-ICME pairs using semi-empirical relationship based on the bow shock theory. We find the following results. (1) Observational CME stand-off distance ratio decreases with increasing Mach number at the Mach numbers between 2 and 6. This tendency is consistent with the results from the semi-empirical relationship. (2) The observational stand-off distance ratios of several ICMEs can be explained by the relationship.

• Steel and Composite Structures
• /
• v.22 no.3
• /
• pp.567-587
• /
• 2016

The present investigation is to study the plane wave propagation and reflection of plane waves in a homogeneous transversely isotropic magnetothermoelastic medium with two temperature and rotation in the context of GN Type-II and Type-III (1993) theory of thermoelasticity. It is found that, for two dimensional assumed model, there exist three types of coupled longitudinal waves, namely quasi-longitudinal wave (QL), quasi-transverse wave (QTS) and quasi-thermal waves (QT). The different characteristics of waves like phase velocity, attenuation coefficients, specific loss and penetration depth are computed numerically and depicted graphically. The phenomenon of reflection coefficients due to quasi-waves at a plane stress free with thermally insulated boundary is investigated. The ratios of the linear algebraic equations. These amplitude ratios are used further to calculate the shares of different scattered waves in the energy of incident wave. The modulus of the amplitude and energy ratios with the angle of incidence are computed for a particular numerical model. The conservation of energy at the free surface is verified. The effect of energy dissipation and two temperatures on the energy ratios are depicted graphically and discussed. Some special cases of interest are also discussed.

• The Korean Journal of Applied Statistics
• /
• v.20 no.3
• /
• pp.515-530
• /
• 2007

Stratum-specific likelihood ratio, which is ratio of the sensitivity to 1-the specificity in each stratum of the test, could be biased if the sensitivity and specificity of diagnostic test are affected by verification bias. Therefore, the optimal cutoff point determined by biased stratum-specific likelihood ratios is incorrect. In this study, we derived adjusted stratum-specific likelihood ratios using the adjusted sensitivity and specificity, and obtained the adjusted optimal cutoff point. The influence of the verification bias on the optimal cutoff point was described through the relation between adjusted and unadjusted stratum-specific likelihood ratios.