• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.5
• /
• pp.525-535
• /
• 2005

Using a three-dimensional computational fluid dynamics (CFD) model with the $k-{\varepsilon}$ turbulence closure scheme based on the renormalization group theory, flow regimes in urban street canyons are classified according to the building and street aspect ratios. The transition between skimming flow (SF) and wake interference flow (WIF) is determined with the size of double-eddy circulation generated behind the upwind building. The transition between WIF and isolated roughness flow (IRF) is determined with the flow reattachment distance from the upwind building. The critical aspect ratios at which the flow transition occurs are found and compared with those in previous studies. The results show that the flow-regime classification method used in this study is quite reasonable and that the values of the critical aspect ratios are generally consistent with those in fluid experiments or large-eddy simulation. The regression equation describing a relation between the building and street aspect ratios at the flow-regime transition is presented.

• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.13-19
• /
• 2016

Objective: The aim of this study was to compare the accuracy of Bolton analysis obtained from digital models scanned with the Ortho Insight three-dimensional (3D) laser scanner system to those obtained from cone-beam computed tomography (CBCT) images and traditional plaster models. Methods: CBCT scans and plaster models were obtained from 50 patients. Plaster models were scanned using the Ortho Insight 3D laser scanner; Bolton ratios were calculated with its software. CBCT scans were imported and analyzed using AVIZO software. Plaster models were measured with a digital caliper. Data were analyzed with descriptive statistics and the intraclass correlation coefficient (ICC). Results: Anterior and overall Bolton ratios obtained by the three different modalities exhibited excellent agreement (> 0.970). The mean differences between the scanned digital models and physical models and between the CBCT images and scanned digital models for overall Bolton ratios were $0.41{\pm}0.305%$ and $0.45{\pm}0.456%$, respectively; for anterior Bolton ratios, $0.59{\pm}0.520%$ and $1.01{\pm}0.780%$, respectively. ICC results showed that intraexaminer error reliability was generally excellent (> 0.858 for all three diagnostic modalities), with < 1.45% discrepancy in the Bolton analysis. Conclusions: Laser scanned digital models are highly accurate compared to physical models and CBCT scans for assessing the spatial relationships of dental arches for orthodontic diagnosis.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.34.3-35
• /
• 2015

Recent high-resolution infrared space missions have revealed supernova remnants (SNRs) of diverse morphology in far infrared (FIR), often very different from their X-ray appearance. This suggests that the FIR emission from SNRs could be of different origins. For a sample of 20 Galactic SNRs, we examine the correlation between their FIR and X-ray properties and explore the origin of the FIR emission. We find that the SNRs with very different FIR and X-ray morphology have relatively large infrared-to-X-ray (IRX) flux ratios. We argue that the FIR emission in these SNRs is likely mainly from dust grains radiatively-heated by shock radiation. For SNRs with similar IR and X-ray morphology, the FIR emission of which is probably mostly from dust grains collisionally heated by hot plasma, we compare their IRX flux ratios with theoretical ratios from a model incorporating time-dependent dust destruction and non-equilibrium ionization cooling behind SNR shock, and discuss the implications of our result.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1178-1186
• /
• 2002

Clean stockers are being used by semiconductor and TFT-LCD manufacturers to store and buffer work in process. The only way to keep the stored product clean is to provide constant clean airflow the product and through stocker. Up to now, stockers typically have been configured to receive their laminar airflow from fan filter units that are located on the side of the stocker. This type of stocker may have such problems as complexity of structure, increment of temperature, mechanical vibration, initial investment and running cost. In this study, in order to solve the above mentioned problems, new air control system in stocker is proposed, which is to control open ratios of exits that are located on the side of the stocker without fan filter units. In this study, static pressure regain was used for the analysis of the open ratios of exits theoretically and experiment was also conducted using actual clean stocker for TFT-LCD manufacturers and CFDesign, was used for simulating airflow in stocker. As a result, open ratios of exits can be obtained by the analysis of static pressure regain and was verified by experiment and simulation results. Therefore, new air control system in stocker can be used by the semiconductor and TFT-LCD manufacturers.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1819-1830
• /
• 1991

The problems associated with noise/energy source identification using multiple input/single output model in linear systems are investigated. Partial coherence function is formulated for the model introducing a virtual force and extraneous noises into the conventional two input/single output system. The analytical results show that the partial coherence function in two input/single output linear system is the function of noise/signal ratios when multiple inputs are mutually coherent and extraneous noises exist. Parametric studies for ordinary and partial coherence functions are carried out to demonstrate the effects of noise/signal ratios for these functions.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.293-298
• /
• 2001

In this paper, film thickness and temperature distribution are measured in EHL point contact at high roll/slip ratios. Infrared temperature mapping with two band pass filters, proposed by Ausherman (1976), is used to measure temperature distribution. And the optical interferometric method with two filters (red and green filters) is used to measure film thickness. Result of experiment showed that temperature rising at film and ball surface occurred very dramatically in Dimple zone. As slip velocity, roll/slip ratio and load increased, size of Dimple and temperature rising became more large. In addition, position and shape of Dimple were changed by roll/slip ratios, and increasing of Dimple size decreased traction coefficient. In short, it is appointed that the Dimple phenomenon be developed by the effect of viscosity wedge.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.807-817
• /
• 2014

Benthic macroinvertebrates were seasonally sampled from upstream and downstream of the Gunwi Dam construction site from 2006 to 2012. Totally 148 and 165 species were collected at the upstream and downstream sampling sites, respectively. At the upstream area after dam construction, there was no significant change of the numbers of non-insect taxa, but at the downstream area, the non-insect taxon numbers were increased gradually. The individual ratio of Ephemeroptera and Diptera had higher value than the other taxa in both of up and downstream. The trichopteran individual ratios were increased in upstream sites, but decreased in downstream sites from 2010. Also, non-insects and coleopteran individual ratios were decreased in upstream, but increased in downstream after completion of dam construction. The annual range of fluctuation in community indices narrowed after construction. According to a functional feeding group analysis, the individual ratios of FC (Filtering Collector) were increased, and GC (Gathering Collector) and SC (Scraper) were decreased in upstream sites annually. In contrast, the annual individual ratios of FC were decreased, and GC and SC were increased in the downstream sites.

• Korean Journal of Remote Sensing
• /
• v.29 no.6
• /
• pp.657-662
• /
• 2013

The comparison between $CO_2$ volume mixing ratios observed by GOSAT and TCCON from September 2009 through November 2012 was performed at Tsukuba and Saga, two downwind sites in East Asia. The temporal trends of $CO_2$ values obtained from GOSAT show good agreement with those observed by TCCON at these two by the TCCON, showing a coefficient of determination ($R^2$) of 0.65. The regression slop we obtained was 0.92, showing a small bias of GOSAT $CO_2$ values compared to those observed by TCCON. However, we found the higher correlation in fall and winter than that in spring and summer. The $CO_2$ volume mixing ratios observ sites. The $CO_2$ volume mixing ratios observed by GOSAT are also in good agreement with those measured ed by GOSAT are in good agreement with those measured by the TCCON at those two sites in fall and winter, showing a coefficient of determination ($R^2$) of 0.66 where as the correlation of determination obtained between GOSAT and TCCON was only 0.27 in spring and summer.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.103-111
• /
• 2004

This paper dealt with the local buckling of H-beams investigated mainly using the parameters of load ratios. load conditions, and support boundary condition considering predicted uniformly elevated temperatures. The physical properties of the material at elevated temperatures followed EC3 Park 1.2. The local buckling of the plates in steel beams show that they are governed by the yield stress or the critical stress of the steel plates according to the ratios of b/tf, d/tw. The evaluation of uniformly heated steel beams on the local buckling considered the stress and moment ratios to the LRFD.

• Toxicological Research
• /
• v.31 no.4
• /
• pp.355-361
• /
• 2015

The aim of this study was to investigate whether genetic polymorphisms of CYP2E1, GSTM1, and GSTT1 and lifestyle habits (smoking, drinking, and exercise) modulate the levels of urinary styrene metabolites such as mandelic acid (MA) and phenylglyoxylic acid (PGA) after occupational exposure to styrene. We recruited 79 male workers who had received chronic exposure in styrene fiberglass-reinforced plastic manufacturing factories. We found that serum albumin was significantly correlated with blood styrene/ambient styrene (BS/AS), urinary styrene (US)/AS, and US/BS ratios as well as urinary metabolites, that total protein correlated with US/MA and US/PGA ratios, and that low density lipoprotein (LDL)-cholesterol significantly correlated with US/BS, US/MA, and US/PGA ratios. Multiple logistic regression analyses using styrene-metabolizing enzyme genotypes and lifestyle habits as dependent variables and blood and urine styrene concentrations and urine styrene metabolite levels as independent variables revealed that $CYP2E1^*5$ was associated with the MA/US ratio and GSTM1 with US/BS, that a smoking habit was associated with US/AS and MA/US ratios and MA and PGA levels, and that regular exercise was correlated with PGA/US. In conclusion, the results suggested that genetic polymorphisms of styrene-metabolizing enzymes, lifestyle behaviors, and albumin and LDL-cholesterol serving as homeostasis factors together are involved in styrene metabolism.