• Title/Summary/Keyword: Ratio of transition zone

Search Result 43, Processing Time 0.021 seconds

Crustal Structure of the Korean Peninsula from Broadband Teleseismic Records by Using Receiver Function (광대역 원격지진의 수신함수를 이용한 한반도 지각구조)

  • Kim, So Gu;Lee, Seoung Kyu;Jun, Myung soon;Kang, Ik Bum
    • Economic and Environmental Geology
    • /
    • v.31 no.1
    • /
    • pp.21-29
    • /
    • 1998
  • Broadband receiver functions are developed from teleseismic P waveforms recorded at Wonju (KSRS), Inchon (IRIS), and Pohang (PHN), and are analyzed to examine the crustal structure beneath the three stations. The teleseismic receiver functions are inverted in the time domain to the vertical P wave velocity structure beneath the stations. Clear P-to-S converted phases from the Moho interface are observed in teleseismic seismograms recorded at the three stations. We estimated the crustal velocity structures beneath the stations using the receiver function inversion. The general features of inversion results are as follows: (1) For Pohang station, there is a high velocity gradient at a 4~5 km deep for SE and NW back azimuth and a low velocity zone at around 10 km deep. The Moho depth is 28 km for NW direction. (2) The shallow crustal structure beneath Wonju station is somewhat complex and there is a high-velocity zone ($V_p{\simeq}6.8km/sec$) at 3 to 4 km deep. The average crustal thickness is 33 km, and a transition zone exists at a 30~33 km deep of lower crust, of which velocity is abruptly changed 6.4 to 7.9 km/sec. (3) For Inchon station, the crustal velocity gradient monotonously increases up to the Moho discontinuity and the velocity is abruptly changed from 6.2 km/sec to 7.9 km/sec at 29 km deep.

  • PDF

Functional Modifications of Daechung Reservoir Eutrophication by Upper Dam Construction (상류댐 건설에 따른 대청호 부영양화에 대한 기능 변화)

  • Lee, Soon-Cheol;Han, Jung-Ho;An, Kwang-Guk
    • Korean Journal of Ecology and Environment
    • /
    • v.41 no.3
    • /
    • pp.348-359
    • /
    • 2008
  • The objectives of the study were to elucidate functional modifications in relation to hydrological, physico-chemical and ecological aspects in Daechung Reservoir by the upper dam constructions of Youngdam Reservoir and analyze temporal and spatial dynamic patterns using trophic parameters of TN, TP, chlorophyll (CHL), and Secchi depth (SD). Hydrological data such as inflow, precipitation, and water levels before (BDC, 1995$\sim$2000) and after (ADC, 2001$\sim$2006) the dam construction showed that precipitation had greater correlations with inflow volume in the BDC (r=0.964, p=0.002) than in the ADC (r=0.857, p=0.029). This outcome indicates that the upper dam construction influenced the inflow and water level of Daechung Reservoir. One of the greatest changes after the dam construction was decreases of nutrient contents (TN, TP) and increases of algal biomass (as CHL) as the water residence time increases. Values of CHL had greater relations with TP in the ADC (r=0.412, p<0.001) than the BDC (r=0.249, p<0.001), indicating that CHL had greater response at a given phosphorus in the ADC. Thus, algal yield at a given TP (CHL : TP ratios) increased in the ADC, resulting in a greater CHL-TP relations. Long-term interannual TP, TN, SD, and CHL showed greater variations in the riverine zone (RZ) than any other transition (TZ) and lacustrine zones (LZ). This phenomenon was mainly attributed to rapid hydrological response in the riverine zone (RZ) to flow reductions (short water residence time) from the upper dam, resulting in ambient contents of nutrients and light regime along with functional relations of CHL-TP.

A numerical method for estimating the elastic modulus of recycled concrete

  • Zhou, Xinzhu;Zheng, Jianjun;Chen, Ting;Zhang, Jian;Wang, Chuanyang;Wu, Jiefeng
    • Computers and Concrete
    • /
    • v.23 no.3
    • /
    • pp.161-170
    • /
    • 2019
  • This paper aims at presenting a numerical method for estimating the elastic modulus of recycled concrete with crushed aggregates. In the method, polygonal aggregates following a given sieve curve are generated, and placed into a square simulation element with the aid of the periodic boundary condition and the overlap criterion of two polygonal aggregates. The mesostructure of recycled concrete is reconstructed by embedding an old interfacial transition zone (ITZ) layer inside each recycled aggregate and by coating all the aggregates with a new ITZ layer. The square simulation element is discretized into a regular grid and a representative point is selected from each sub-element. The iterative method is combined with the fast Fourier transform to evaluate the elastic modulus of recycled concrete. After the validity of the numerical method is verified with experimental results, a sensitivity analysis is conducted to evaluate the effects of key factors on the elastic modulus of recycled concrete. Numerical results show that the elastic modulus of recycled concrete increases with the increase of the total aggregate content and the elastic moduli of old and new ITZ but decreases with increasing the replacement ratio of recycled aggregate and the thicknesses of old and new ITZ. It is also shown that, for a replacement ratio of recycled aggregate smaller than 0.3, the elastic modulus of recycled concrete is reduced by no more than 10%.

Finite Element Analysis of the Reinforced Concrete Boundary-Beam-Wall System Subjected to Axial Load (축하중이 작용하는 RC 경계보-벽체 시스템의 해석적 평가)

  • Son, Hong-Jun;Kim, Seung-Il;Kim, Dae-Jin
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.34 no.2
    • /
    • pp.93-100
    • /
    • 2021
  • In Korea, one of the most used structural systems for residential apartment buildings is the combination of the reinforced concrete (RC) wall and rahmen structures in the upper and lower floors, respectively. To alleviate the significant difference between the stiffnesses of these two structural systems, large transfer girders are generally required in the transition zone of the structure, which then results in the use of large amounts of construction materials and low economic feasibility. This paper proposes a new RC boundary-beam-wall system that can minimize the disadvantages of the RC transfer girder system. The structural performance of the proposed system subjected to axial loading was evaluated via rigorous three-dimensional nonlinear finite element analysis. Four parameters, namely the ratio of lower wall to upper wall lengths, distance between stirrups, main bar slope ratio, and slab length, were considered in the finite element analysis, and their effects on the maximum axial load were analyzed and discussed.

Impacts of Fresh and Saline Groundwater Development in Sungsan Watershed, Jeju Island (제주도 성산유역의 담수와 염수 지하수 개발의 영향)

  • Park, Namsik;Koh, Byoung-Ryoun;Lim, Youngduck
    • Journal of Korea Water Resources Association
    • /
    • v.46 no.7
    • /
    • pp.783-794
    • /
    • 2013
  • Saline groundwater, in addition to fresh groundwater, is actively developed for inland aqua culture in Jeju Island where groundwater is practically the only source of freshwater. In this work we analyzed impacts of saline and fresh groundwater development on groundwater systems in Sungsan subwatershed in Jeju. A sharp-interface model was used to simulate fresh and saline groundwater flows. Withdrawal of freshwater imparted adverse impacts by lowering groundwater level and inducing saltwater encroachment. Withdrawal of saline water imparted mixed results: on one hand it lowered groundwater level, on the other hand it reduced saltwater encroachments. However, freshwater development lowered groundwater level much more than salinewater development did. Modified Ghyben-Herzberg ratio was developed for a transition zone with finite width. Comparison against observed data resulted in fair agreement.

Dynamic Properties for Geomaterials of Railway as Determined by Large-scale Cyclic Triaxial Test (대형삼축압축시험을 이용한 철도노반재료의 동적 물성 제안)

  • Lee, Sung Jin;Hwang, Su Beom;Lee, Su Hyung;Lee, Seong Hyeok;Kim, Ki Jae
    • Journal of the Korean Society for Railway
    • /
    • v.17 no.1
    • /
    • pp.43-51
    • /
    • 2014
  • In the earth structures of railways, large coarse granular materials are widely used as fill materials. However, experimental studies that consider the dynamic properties of these coarse granular materials have rarely been carried out in Korea due to the lack of a large scale test apparatus in this country. In this study, large scale cyclic triaxial tests were carried out for materials such as reinforced roadbed (subballast, graded crushed stone), transition zone gravel, and the upper subgrade of a railway. These specimens were prepared according to certain conditions (dry unit weight, grain size distribution, and so on) specified in the Korea railroad design standard. Based on these large triaxial test results, normalized shear modulus and damping ratio curves according to small strain level are suggested. A model and coefficients for each material are also proposed.

Vibration Damping Ratio Performance Evaluation According to the Polymer Mixing Rate of SBR-based Polymer Modified Mortar through Ultrasonic Pulse Analysis (초음파 펄스 분석을 통한 SBR계 폴리머 혼입 모르타르의 폴리머 혼입률에 따른 진 동감쇠비 성능 평가)

  • Jeong, Min-Goo;Jang, Jong-Min;Lee, Han-Seung
    • Journal of the Korea Institute of Building Construction
    • /
    • v.22 no.6
    • /
    • pp.543-551
    • /
    • 2022
  • The mechanical performance and vibration damping ratio performance of a specimen according to the polymer mixing rate were evaluated for polymer modified mortar. As a polymer, Styrene Butadiene Rubber(SBR) liquid polymer with a solid content of about 49~51% was used, and the polymer content was increased by liquid 5%. The specimen was 40*40*160(mm), and after curing, compressive strength, flexural strength, and vibration damping ratio were measured using the ultrasonic pulse method. As a result, it was found that the compressive strength decreased as the polymer was mixed, but the flexural strength was increased. The vibration damping ratio increased by 11% at 5% polymer, 28% at 10% polymer, 33% at 15% polymer, and 72 at 20% polymer. I was found that the incorporation of the polymer was very effective to reduce the vibration of the mortar. In addition, through SEM and SEM-EDS analysis, it is determined that the cause of vibration reduction due to polymer mixing is that the polymer film formed in the transition zone of aggregate and internal voids buffered the vibration of the mortar inside. Taken together, in the scope of this study, the appropriate polymer mixing ratio for reducing the vibration of mortar is judged to be about 7.5%.

An analysis on gravel and sand ofsand-gravel bar in the Duchon stream of Hong-Cheon Region (홍천 두촌천 사력퇴의 역과 모래 분석)

  • Oh, Su Jeong;Cho, Heon;Hwang, Sung-Han;Kim, Man Kyu
    • Journal of The Geomorphological Association of Korea
    • /
    • v.21 no.4
    • /
    • pp.109-120
    • /
    • 2014
  • This study is an analysis on gravel and sand of sand-gravel bar that stretches variously in the Duchon stream basin, which is one of Hong-Cheon River(a well-developed sand-gravel bar in upstream river)'s upper stream basin. The purpose of this study was to understand the characteristic of the stream's topographic development that variously occur in the small basin by comparing the differences between the aspects of development and the sediment of sand-gravel bar in each section and by examining the transition of sediments moving from upstream to downstream. Through the analysis on the roundness and flatness of gravel, we observed an irregular trend following the increase in supply of granite gravel and gneiss gravel as we traveled downstream. As for the aspect of change in sand's grain size, the overall ratio of medium-coarse sand was very high, but the results showed no big difference in the change following the inflow of stream from the main stream section to the gneiss and granite zone.

Investigation of Transient Performance of An Auxiliary Power Unit Microturbine Engine (보조동력용 마이크로터빈 엔진에 대한 과도성능 해석)

  • Son, Ho-Jae;Kim, Soo-Yong
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.11 no.3
    • /
    • pp.20-28
    • /
    • 2007
  • The easiest way to see the phenomena of compressor surge is to show the static and dynamic operation characteristic on the map. Its operation zone will be restricted by the surge limit and, static and transient process must have some margin for it. Effect of rotor moment of inertia, air/gas volumes and heat transfer are factors to cause the transition from the static line. In case a large volume such as heat exchanger exists in the system it will exert a substantial influence to dynamic characteristics. In the present paper, influence of air volume bled from the compressor exit on transient process is investigated with an example of an auxiliary power unit micro-turbine engine. Turbine mass, pressure ratio, rotation speed, power and moment are calculated based on mass and work conservation. Result from the present study can give guidance to design the control system. A computer program is developed to calculate the dynamic process using the MathCAD commercial software.

Study on Flora Distributed around Mt. Hwangseok, Gyeongsangnam-do for Selecting the Ecological and Landscape Conservation Area (생태·경관보전지역 선정을 위한 경상남도 황석산 일대에 분포하는 식물상 연구)

  • Oh, Hyun-Kyung;Kim, Se-Chon;You, Ju-Han
    • Journal of Environmental Impact Assessment
    • /
    • v.24 no.1
    • /
    • pp.51-65
    • /
    • 2015
  • The flora distributed around Mt. Hwangseok were summarized as 495 taxa including 97 families, 295 genera, 394 species, 4 subspecies, 80 varieties and 17 forms. In the component ratio of taxa, pteridophyta was 4.2%, 1.2% of gymnospermae, 78.8% of dicotyledonae and 15.8% of monocotyledonae. The rare plants were 9 taxa including Aconitum chiisanense, Eranthis stellata, Aristolochia contorta, Viola albida and so forth. The Korean endemic plants were 13 taxa including Populus tomentiglandulos, Pseudostellaria coreana, Aconitum pseudolaeve, Thalictrum actaefolium var. brevistylum and so forth. The specific plants by floristic region were 16 taxa including Cimicifuga heracleifolia, Sanguisorba longifolia, Symplocarpus renifolius, Betula davurica and so forth. The plants adaptable to climate change were 11 taxa including Aconitum pseudolaeve, Ajuga spectabilis, Carex okamotoi, Rhynchosia volubilis and so forth. The naturalized plants were 20 taxa including Fallopia convolvulus, Rumex crispus, Phytolacca amrericana, Robinia pseudoacacia and so forth. The invasive alien plant was Aster pilosus. The emergence of local ecologically important species, set the correct range for the core and buffer zone, transition zone, coded will be necessary, the distribution of the specialty plant areas and rare plants, an area management plan should be organized by nature. In addition, a variety of assessment techniques and accurate data to establish the validity of the core area is also set to acquire.