• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.453-460
• /
• 2019

The SR-DCSK(Short Reference Differential Chaos Shift Keying) is a variant of DCSK that improves data transmission speed and energy efficiency without additional complexity. However, even when the reference signal of the optimum length is applied, the BER performance of the SR-DCSK is not better than that of the conventional DCSK. In this paper, we propose a scheme to improve the performance of SR-DCSK by applying two scale factors (scale coefficients) to the reference signal and the information signal, respectively. And the performance of the proposed method is analyzed by BER using Gaussian Approximation. Based on the derived BER expressions, we minimize the BER for a given system parameter to optimize the ratio of the two coefficients. Simulation results confirm that the BER of the proposed method is much improved over the SR-DCSK when we apply the optimal ratio of the two scale factors.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.166-170
• /
• 2012

Most of Cudriania tricuspidata Bureau saplings in Korea have been produced by crown division. But the production of Cudriania tricuspidata B. saplings by this method is very low in efficiency and in uniformity. Therefore, to develop Cudriania tricuspidata B. saplings production system by cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to temperature on the bed, length, thickness of the hard wood cutting and rooting agent application. Of different concentration of rooting agent, the 5,000 ppm of 1-naphthalenacetic acid(NAA) and Indole butyric acid(IBA) were found to be the highest in rooting of hardwood cuttings; other concentration were in order as follows; 2,500, 1,000 and 10,000 ppm in concentration of rooting agents. The shading ratio of polyethylene film showed the highest rooting ratio of the softwood cuttings at 55%.

• Journal of Environmental Science International
• /
• v.33 no.1
• /
• pp.17-25
• /
• 2024

This study aimed to determine the most suitable coir substrate mixing ratio for optimizing the growth and yield of the "lpduelkkae 1" cultivar. We comprehensively analyzed the physicochemical properties, growth, and yields of four different substrate combinations: perlite (coir with mixing ratios of 70:30 (PC30), 50:50 (PC50), and 30:70 (PC70)) and 100% coir (C100). The results revealed substantial differences in substrate properties. C100 exhibited the highest total porosity and the lowest solid phase, indicating excellent air permeability. The pH levels and electrical conductivity (EC) values ranged from 5.4-6.8 and 1.2-3.1 dS·m^-1, respectively. Leaf growth parameters, including length, width, and dry weight, showed positive correlations with high coir ratios, except for PC30. PC70 and C100 outperformed other substrates in stem growth, exhibiting superior stem diameter and fresh and dry weights. The quantity of marketable leaves was the highest in the C100 substrate. Furthermore, C100 comprised integrated levels of essential nutrients, such as Ca and Mg, owing to its high coir content. In conclusion, a coir ratio of approximately 70% (v/v) should be maintained in the substrate for creating an optimal cultivation environment. Furthermore, the selection of humidity-resistant varieties as well as precise nutrient and moisture management for different seasons and growth stages are crucial for a successful perilla leaf hydroponic cultivation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.6
• /
• pp.155-164
• /
• 2023

Sedirea japonica is one of the critically endangered species in South Korea mostly due to artificial harms such as illegal collection and habitat destruction. Therefore, artificial propagation through improving germination rate, increasing growth, and controlling flowering is meaningful for the conservation and reintroduction of S. japonica. It is suggested that cytokinins are one of the multi-factors that contribute to plant growth and floral responses. Especially, exogenous cytokinins have been known to induce or promote shoot growth or earlier flowering in orchids. Therefore, it was investigated how the application of 6-benzylaminopurine (BA) influenced the growth and inflorescence of S. japonica. A foliar spray containing BA at 100, 200, 300, and 400 ppm was applied from 1st July to 30th December 2021. Leaf length, leaf length growth rate, leaf width, and width and length ratio were measured as growth-related factors. Visible inflorescence rate, inflorescence length, the number of flowers per inflorescence, and the distance between the stalks were measured as flowering-related factors. Growth-related factors except for leaf growth rate were not affected by BA treatments, while leaf growth rate was significantly increased by 200 ppm of BA treatment. The visible inflorescence rate increased by 200 ppm of BA treatment, and there seems an optimal concentration and threshold of BA treatment. An iterative experiment with more seedlings and measurement factors would be helpful to figure out the effects of exogenous BA treatment on S. japonica, and it can be applied for mass propagation.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.1
• /
• pp.65-70
• /
• 2018

The objective of this study was to describe a radiofrequency (RF) coil design for in vivo sodium magnetic resonance imaging (MRI) for use in small animals. Accumulating evidence has indicated the importance and potential of sodium imaging with improved magnet strength (> 7T), faster gradient, better hardware, multi-nucleus imaging methods, and optimal coil design for patient and animal studies. Thus, we developed a saddle-shaped sodium volume coil with a diameter/length of 30/30 mm. To evaluate the efficiency of this coil, bench-level measurement was performed. Unloaded Q value, loaded Q value, and ratio of these two values were estimated to be 352.8, 211.18, and 1.67, respectively. Thereafter, in vivo acquisition of sodium images was performed using normal mice (12 weeks old; n = 5) with a two-dimensional gradient echo sequence and minimized echo time to increase spatial resolution of images. Sodium signal-to-noise ratio in mouse kidneys (renal cortex, medulla, and pelvis) was measured. We successfully acquired sodium MR images of the mouse kidney with high spatial resolution (approximately 0.625 mm) through a combination of sodium-proton coils.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.161-169
• /
• 2012

In general, Euclidean minimum spanning tree is a tree connecting input nodes with minimum connecting cost. But the tree may not be optimal when applied to real world problems of three dimension. In this paper, three dimension Euclidean minimum spanning tree is proposed, connecting all input nodes of 3-dimensional space with minimum cost. In experiments for 30,000 input nodes with 100% space ratio, the tree produced by the proposed method can reduce 90.0% connection cost tree, compared with the tree by two dimension Prim's minimum spanning tree. In two dimension plane, the proposed tree increases 251.2% connecting cost, which is pointless in 3-dimensional real world. Therefore, the proposed method can work well for many connecting problems in real world space of three dimensions.

• Tunnel and Underground Space
• /
• v.24 no.2
• /
• pp.155-165
• /
• 2014

Multiple thermal energy storage (TES) caverns can be used for storing thermal energy on a large scale and for a high-aspect-ratio heat storage design to provide good thermal performance. It may also be necessary to consider the use of multiple caverns with a reduced length when a single, long tunnel-shaped cavern is not suitable for connection to aboveground heat production and injection equipments. When using multiple TES caverns, the separation distance between the caverns is one of the significant factors that should be considered in the design of storage space, and the optimal separation distance should be determined based on a quantitative stability criterion. In this paper, we described a numerical approach for determining the optimal separation distance between multiple caverns for large-scale TES utilization. For reliable stability evaluation of multiple caverns, we employed a probabilistic method which can quantitatively take into account the uncertainty of input parameters by probability distributions, unlike conventional deterministic approaches. The present approach was applied to the design of a conceptual TES model to store hot water for district heating. The probabilistic stability results of this application demonstrated that the approach in our work can be effectively used as a decision-making tool to determine the optimal separation distance between multiple caverns. In addition, the probabilistic results were compared to those obtained through a deterministic analysis, and the comparison results suggested that care should taken in selecting the acceptable level of stability when using deterministic approaches.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.473-483
• /
• 2004

In this paper, we numerically investigated the optimum pump light power best compensating for pulse distortion due to both chromatic dispersion and self phase modulation (SPM) as a function of channel input power in 8 channel ${\times}$ 40 Gbps wavelength division multiplexing (WDM systems. Also we investigated the allowable maximum channel input power dependence on modulation format and fiber dispersion coefficient in the various pump light power of OPC. The considered WDM transmission system is based on path-averaged intensity approximation (PAIA) mid-span spectral inversion (MSSI) compensation method, which has highly-nonlinear dispersion shifted fiber (HNL-SDF) as nonlinear medium of optical phase conjugator (OPC) in the mid-way of total transmission line. We confirmed that optimal pump light power of HNL-DSF OPC depend on modulation format, initial channel input power, total transmission length and fiber dispersion. But optimal pump light power of HNL-DSF OPC must be selected to make power conversion ratio to almost unity. And we confirmed that, if we allow a 1 dB eye opening penalty (EOP), the tolerable maximum channel input power is increased by using RZ than NRZ as modulation format when pump light power of HNL-DSF OPC is not optimal value but another values.

• Horticultural Science & Technology
• /
• v.35 no.3
• /
• pp.289-299
• /
• 2017

The objective of this study was to determine the effect of replacing perlite (PL) with pellets processed with poultry feather fiber as an inert material to prepare growing medium. The growth and flowering of Salvia splendens 'Vista Red' grown in individual growing medium $Biosangto^{(R)}$, peat moss (PM), PL, and two pellets (P45-1 and P45-2) were evaluated. Peat moss was mixed with PL, P45-1, or P45-2 at various ratios (1:0 to 1:3 or 3:1 by volume) to investigate the feasibility of replacing PL with pellets. Nutrient composition of the growing medium and leaf tissues was analyzed. The number of florets, inflorescence length, plant height, and fresh weight of plants grown in media containing P45-1 or P45-2 were reduced compared to those grown in individual growing medium PM or PL. As the mixing ratio of P45-1 or P45-2 to PM was higher, the growth of salvia, such as inflorescence length, plant height, number of leaves, and fresh weight was inhibited. Our results indicate that mixing three parts PM with one part of P45-1 (PM/P45-1/3:1) or P45-2 (PM/P45-2/3:1) accelerated flowering and increased the number of florets and leaves compared to other mixing ratios of PM and pellets media. The concentrations of phosphorus (P), calcium (Ca), boron (B), iron (Fe), and copper (Cu) in individual growing medium PL, P45-1, and P45-2 were significantly lower than those in PM. The concentration of N was the highest in leaves of plants grown in P45-1 or P45-2 amended media, and the concentrations of P, Ca, and zinc (Zn) in leaves were lower in individual growing medium P45-1 or P45-2 than in PM and PL. The pH of PM/P45-1/3:1 or PM/P45-2/3:1 media was maintained at optimal level (5.8-5.9) and the concentrations of macro- and micro-elements in the media and leaves were considered to be optimal levels. Therefore, mixing three parts PM with one part P45-1(PM:P45-1/3:1) or P45-2 (PM:P45-2/3:1) is recommended for improved growth and flowering in salvia. This suggests that P45-1 or P45-2 can replace PL as an inert material to prepare growing medium.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.584-589
• /
• 2000

In order to inhibit rot of soybean sprouts, presoaking treatments of soybeans with various solutions were studied. Optimal soaking time was 20min and citric acid, chitosan, GFSE(Grapefruit seed extract) were more effective. Most of presoaking treatments decreased the rot ratio of soybeans considerably, and didn't decrease germination ratio of them compared to control. Particularly GFSE, chitosan and phosphate buffer were effective. Presoaking treatments besides ethanol showed increased weight and yield of soybean sprouts compared to control, and particularly chitosan treatment increased yield of 67%, weight of 6.9% and length of 9.5% of soybean sprouts compared to control. Presoaking treatments decreased total microbial count of soybeans and rot of soybean sprouts during cultivation.